| Influence of Microstructure and Surface Roughness on Oxidation Kinetics at 500-600 degrees C of Ti-6Al-4V Alloy Fabricated by Additive Manufacturing |
7 |
| Reinterpretation of Type II Hot Corrosion of Co-Base Alloys Incorporating Synergistic Fluxing |
7 |
| Oxidation Properties of a Beta-Stabilized TiAl Alloy Modified by Rare Earth Elements |
7 |
| Rapid Assessment of Oxidation Behavior in Co-Based / Alloys |
7 |
| Predictions and Analyses on the Growth Behavior of Oxide Scales Formed on Ferritic-Martensitic in Supercritical Water |
7 |
| In Situ Oxide Growth Characterization of Mn-Containing Ni-25Cr (wt%) Model Alloys at 1050 degrees C |
7 |
| Effect of Titanium Addition on Alumina Growth Mechanism on Yttria-Containing FeCrAl-Base Alloy |
6 |
| Resistance of High-Nickel, Heat-Resisting Alloys to Air and to Supercritical CO2 at High Temperatures |
6 |
| Internal Oxidation of Fe-Mn-Cr Steels, Simulations and Experiments |
6 |
| Effect of Exposure Temperature on Oxidation of Austenitic Steel HR3C in Supercritical Water |
6 |
| Corrosion Properties and Mechanisms of Austenitic Stainless Steels and Ni-Base Alloys in Supercritical Water Containing Phosphate, Sulfate, Chloride and Oxygen |
6 |
| Effect of Dilute Tellurium and Selenium Additions on the High-Temperature Oxidation Resistance of Copper Alloys |
5 |
| Transformation and Precipitation Processes in a Metal Substrate of Oxidized TiAl-Based Alloys |
5 |
| Improving the High-Temperature Oxidation Resistance of TiAl Alloy by Anodizing in Methanol/NaF Solution |
5 |
| Corrosion and Carburization Behavior of Heat-Resistant Steels in a High-Temperature Supercritical Carbon Dioxide Environment |
5 |
| Structural Evolution of a Ni Alloy Surface During High-Temperature Oxidation |
5 |
| Steam Oxidation Resistance of Advanced Steels and Ni-Based Alloys at 700 degrees C for 1000 h |
4 |
| Oxidation Resistant Ce-modified Silicide Coatings Prepared on Ti-6Al-4V Alloy by Pack Cementation Process |
4 |
| Corrosion and Carburization Behaviour of Ni-xCr Binary Alloys in a High-Temperature Supercritical-Carbon Dioxide Environment |
4 |
| The Influence of Temperature on the Oxidation Mechanism in Air of HR3C and Aluminum-Containing 22Cr-25Ni Austenitic Stainless Steels |
4 |
| High-Temperature Corrosion of Ti-46Al-6Nb-0.5W-0.5Cr-0.3Si-0.1C Alloy in N-2/0.1%H2S Gas |
4 |
| Effect of Surface Finish on High-Temperature Oxidation of Steels in CO Supercritical CO and Air |
4 |
| Microstructural Evolution of Oxidation Film on a Single Crystal Nickel-Based Superalloy at 980 A degrees C |
4 |
| In-Service Oxidation and Microstructural Evolution of a Nickel Superalloy in a Formula 1 Car Exhaust |
4 |
| Roles of Mn in the High-Temperature Air Oxidation of 9Cr Ferritic-Martensitic Steel After Severe Plastic Deformation |
4 |
| Type II Hot Corrosion Screening Tests of a Cr2AlC MAX Phase Compound |
4 |
| Thermal Durability of YSZ/Nanostructured Gd2Zr2O7 TBC Undergoing Thermal Cycling |
3 |
| High-Temperature Oxidation and Pickling Behaviour of HSLA Steels |
3 |
| ToF-SIMS Study on the Initial Stages of the Halogen Effect in the Oxidation of TiAl Alloys |
3 |
| Influence of Preoxidation on High-Temperature Corrosion of a FeCrAl Alloy Under Conditions Relevant to Biomass Firing |
3 |
| Oxidation Behaviour of Alloys 800H, 3033 and 304 in High-Temperature Supercritical Water |
3 |
| The Influence of Oxide-Scale Microstructure on KCl(s)-Induced Corrosion of Low-Alloyed Steel at 400 degrees C |
3 |
| Chromia Scale Thermally Grown on Pure Chromium Under Controlled p(O-2) Atmosphere: I. Spallation Investigation Using Photoelectrochemical Techniques at a Mesoscale |
3 |
| Impact of Deposits and Their Morphology on the Active Corrosion of Iron in Chlorine- and Sulfur-Containing Atmospheres in the Temperature Range of 350-500 degrees C |
3 |
| Microstructure and Oxidation Behavior of Cobalt Diffusional Coating Fabricated on AISI 429 Stainless Steel |
3 |
| Microstructure and Oxidation Behavior of Ni-TiO2 Composite Coating at High Temperature |
3 |
| Life and FCT Failure of Yttria- and Ceria-Stabilized EBPVD TBC Systems on Ni-Base Substrates |
3 |
| Oxidation and Hot Corrosion Performance of NiCoCrAlY Coatings Fabricated Via Electrolytic Codeposition |
3 |
| Effects of Hf, Y, and Zr on Alumina Scale Growth on NiAlCr and NiAlPt Alloys |
3 |
| Effective Reduction of Chromium-oxy-hydroxide Evaporation from Ni-Base Alloy 690 |
3 |
| Oxidation Behavior of gamma '-Ni3Al-Based Ni-20Al-5Cr Alloys With and Without Reactive Elements Under Different Heating Conditions |
3 |
| Effect of Alloying Chemistry on Fireside Corrosion Behavior of Ni-Fe-Based Superalloy for Ultra-supercritical Boiler Applications |
3 |
| Prediction of Oxide Phases Formed upon Internal Oxidation of Advanced High-Strength Steels |
3 |
| The Effect of HVOF Bond Coating with APS Flash Coating on TBC Performance |
3 |
| Effect of Sulphur on the Oxidation Behaviour of Possible Construction Materials for Heat Exchangers in Oxyfuel Plants in the Temperature Range 550-700 degrees C |
3 |
| High-Temperature Corrosion Behaviour of Aluminized-Coated and Uncoated Alloy 718 Under Cyclic Oxidation and Corrosion in NaCl Vapour at 750 degrees C |
3 |
| Evolution of Surface Morphology of Oxide Formed During Initial-Stage Oxidation of gamma-TiAl Alloy Using In Situ Environmental SEM |
3 |
| Oxidation Behavior of the Skutterudite Material Ce0.75Fe3CoSb12 |
3 |
| High-Temperature Corrosion of HVAF-Sprayed Ni-Based Coatings for Boiler Applications |
2 |
| Corrosion Evaluation and Material Selection for Supercritical Water Reactor Used for Heavy Oil Upgradation |
2 |
