| Applying ANFIS-PSO algorithm as a novel accurate approach for prediction of gas density |
11 |
| Utilization of LSSVM algorithm for estimating synthetic natural gas density |
11 |
| The effect of nanoclay as bitumen modifier on rutting performance of asphalt mixtures containing high content of rejuvenated reclaimed asphalt pavement |
9 |
| Study on obtaining high performance diesel/biodiesel fuel by using heterogeneous catalysts |
9 |
| A Novel ANFIS-PSO Network for forecasting oil flocculated asphaltene weight percentage at wide range of operation conditions |
7 |
| Surface modification of SiO2 nanoparticles to increase asphaltene adsorption |
7 |
| Implementing PSO-LSSVM model to approximate vaporization enthalpy of pure hydrocarbons and petroleum fractions |
7 |
| Effect of nanometer pore structure on methane adsorption capacity in organic-rich shale |
7 |
| Study on migration characteristics of heavy metals during oil sludge incineration |
7 |
| Methanol-to-olefins process technology: current status and future prospects |
7 |
| Flow characteristics of xanthan solutions and their crude oil emulsions in terms of thixotropic behavior |
6 |
| Methanol synthesis revisited: reaction mechanisms in CO/CO2 hydrogenation over Cu/ZnO and DFT analysis |
6 |
| Molecular investigations on the interactions of graphene, crude oil fractions and mineral aggregates at low, medium and high temperatures |
6 |
| Investigation of enhancing effect and mechanism of basalt fiber on toughness of asphalt material |
6 |
| Asphaltene aggregation onset during high-salinity waterflooding of reservoirs (a molecular dynamic study) |
6 |
| Evaluation of a new alkaline/microbe/polymer flooding system for enhancing heavy oil recovery |
6 |
| Adsorption studies on removal of Congo red dye from aqueous solution using petroleum coke |
5 |
| Detailed study on the effect of nano-particle size on emission characteristics of diesel engine |
5 |
| Methanol synthesis revisited: The nature of the active site of Cu in industrial Cu/ZnO/Al2O3 catalyst and Cu-Zn synergy |
5 |
| Prediction of formation of polycyclic aromatic hydrocarbon (PAHs) on sediment of Caspian Sea using artificial neural networks |
5 |
| Effects of calcite and dolomite on conversion of heavy oil under subcritical condition |
5 |
| Contribution of the Zubair source rocks to the generation and expulsion of oil to the reservoirs of the Mesopotamian Basin, Southern Iraq |
5 |
| Thermal stability and sorption properties of asphaltene sulfocathionites |
5 |
| Evaluation of performance properties of 50% recycled asphalt mixtures using three types of rejuvenators |
5 |
| Adsorptive desulfurization of thiophene from the model fuels onto graphite oxide/metal-organic framework composites |
5 |
| Simulation of the effect of rock type on recovery plan of a mature carbonate oilfield in the Middle East - Part 2: EOR plan |
5 |
| Experimental investigation of effect of asphaltene deposition on oil relative permeability, rock wettability alteration, and recovery in WAG process |
5 |
| An absorption capacity investigation of new absorbent based on polyurethane foams and rice straw for oil spill cleanup |
5 |
| Demetallization and desulfurization of heavy oil residues by adsorbents |
5 |
| Recent development in pyrolytic catalysts of oil sludge |
5 |
| Evaluation of rheological characteristics of asphalt modified with waste engine oil (WEO) |
5 |
| Prediction of the interfacial tension between hydrocarbons and carbon dioxide |
5 |
| Evaluating the adhesion properties of crude oil fractions on mineral aggregates at different temperatures through reactive molecular dynamics |
5 |
| The composition of aromatic destruction products of Domanic shale kerogen after aquathermolysis |
4 |
| The study of bitumen by differential scanning calorimetry: The interpretation of thermal effects |
4 |
| Using Pebax-1074/ZIF-7 mixed matrix membranes for separation of CO2 from CH4 |
4 |
| Laboratory evaluation of the effects of short-term aging on high temperature performance of asphalt binder modified with crumb rubber and rice husk ash |
4 |
| The effect of a bio additive on the viscosity and the energy requirement on heavy crude oil flow |
4 |
| Experimental investigation of the effect of dispersed silica and alumina nanoparticles on oil-aqueous phase interfacial tension |
4 |
| Aquathermolysis of heavy oil in reservoir conditions with the use of oil-soluble catalysts: part II - changes in composition of aromatic hydrocarbons |
4 |
| Aquathermolysis of heavy oil in reservoir conditions with the use of oil-soluble catalysts: part III - changes in composition resins and asphaltenes |
4 |
| Application of ANFIS-PSO as a novel method to estimate effect of inhibitors on Asphaltene precipitation |
4 |
| Effect of comb-type copolymer on crystallization of paraffin from waxy oils and methyl ethyl ketone (MEK) -toluene dewaxing |
4 |
| Effect of catalyst condition on sedimentation and conversion in the ebullated bed vacuum residue H-Oil hydrocracking |
4 |
| Utilization of RBF-ANN as a novel approach for estimation of asphaltene inhibition efficiency |
4 |
| Effect of a nonionic surfactant on the formation of natural gas hydrate in a diesel emulsion system |
4 |
| Combined effect of nanoporous diluent and steam on catalytic upgrading of fuel oil to olefins and fuels over USY catalyst |
4 |
| Fuel oil characteristics and applications: economic and technological aspects |
4 |
| Recovery of crude oil from oily sludge in an oilfield by sophorolipid |
4 |
| Determination of the content of metals in used lubricating oils using AAS |
4 |
