| Polyvinyl alcohol: A review of research status and use of polyvinyl alcohol based nanocomposites |
40 |
| An overview on properties and applications of poly(butylene adipate-co-terephthalate)-PBAT based composites |
26 |
| Study of processing parameters in fused deposition modeling based on mechanical properties of acrylonitrile-butadiene-styrene filament |
16 |
| Mechanical and thermal properties of bamboo fiber reinforced polypropylene/polylactic acid composites for 3D printing |
14 |
| Thermoplastic polyurethanes derived from petrochemical or renewable resources: A comprehensive review |
13 |
| Improvement of compatibility and mechanical properties of the poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends and films by reactive extrusion with chain extender |
11 |
| Dielectric, transport and thermal properties of clay based polymer- nanocomposites |
10 |
| Cellulose nanocrystal-based poly(butylene adipate-co-terephthalate) nanocomposites covered with antimicrobial silver thin films |
10 |
| Influence of Aliphatic and Aromatic Isocyanates on the Properties of Poly(Ether Ester) Polyol Based PU Adhesive System |
10 |
| Improvement of anti-icing properties of low surface energy coatings by introducing phase-change microcapsules |
10 |
| Nonlinear vibration and modal analysis of FG nanocomposite sandwich beams reinforced by aggregated CNTs |
9 |
| Mass-produced graphene-HDPE nanocomposites: Thermal, rheological, electrical, and mechanical properties |
9 |
| Simultaneous effects of silanized coal fly ash and nano/micro glass fiber on fracture toughness and mechanical properties of carbon fiber-reinforced vinyl ester resin composites |
9 |
| Control of Conductive and Mechanical Performances of Poly(Amide-Imide) Composite Films Utilizing Synergistic Effect of Polyaniline and Multi-Walled Carbon Nanotube |
9 |
| Synthesis and characterization of an efficient flame retardant based on aromatic ring and phosphate ester for epoxy resin |
9 |
| Improved environmental stability, electrical and EMI shielding properties of vapor-grown carbon fiber-filled polyaniline-based nanocomposite |
9 |
| Plasticized PVC graphene nanocomposites: Morphology, mechanical, and dynamic mechanical properties |
9 |
| Preparation of microcellular thermoplastic polyurethane (TPU) foam and its tensile property |
9 |
| Effect of mold opening on the properties of PLA samples obtained by foam injection molding |
8 |
| On creep, recovery, and stress relaxation of carbon fiber-reinforced epoxy filament wound composites |
8 |
| Preparation of long-chain branched poly(ethylene terephthalate): Molecular entanglement structure and toughening mechanism |
8 |
| Fluoroelastomers reinforced with carbon nanofibers: A survey on rheological, swelling, mechanical, morphological, and prediction of the thermal degradation kinetic behavior |
8 |
| A review on microfabrication of thermoplastic polymer-based microneedle arrays |
8 |
| Cellulose nanofibril-reinforced polypropylene composites for material extrusion: Rheological properties |
8 |
| Highly flame retardant and bio-based rigid polyurethane foams derived from orange peel oil |
8 |
| Noncytotoxic silver and gold nanocomposite hydrogels with enhanced antibacterial and wound healing applications |
8 |
| Processing and characterization analysis of pyrolyzed oil rubber (from waste tires)-epoxy polymer blend composite for lightweight structures and coatings applications |
8 |
| Application of the Basalt Powder as a Filler for Polypropylene Composites With Improved Thermo-Mechanical Stability and Reduced Flammability |
8 |
| Synthesis and RSM-CCD optimization of microwave-induced green interpenetrating network hydrogel adsorbent based on gum copal for selective removal of malachite green from waste water |
7 |
| Rapid fabrication of micro structure on polypropylene by plate to plate isothermal hot embossing method |
7 |
| Development of a new two-enzyme biosensor based on poly(pyrrole-co-4-ethylenedioxythiophene) for lactose determination in milk |
7 |
| Role of thermodynamic and kinetic interaction of poly(vinylidene fluoride) with various solvents for tuning phase inversion membranes |
7 |
| Mixed Matrix PVDF/Graphene and Composite-Skin PVDF/Graphene Oxide Membranes Applied in Membrane Distillation |
7 |
| Gas barrier and wetting properties of whey protein isolate-based emulsion films |
7 |
| Multifunctional polyaniline/chloroplatinic acid composite material: Characterization and potential applications |
7 |
| Hybrid-permeability model evaluation through concepts of tortuosity and resistance rate: Properties of manufactured hybrid laminate |
7 |
| A review of thermoplastic elastomeric nanocomposites for high voltage insulation applications |
7 |
| Blends of polylactic acid with thermoplastic copolyester elastomer: Effect of functionalized terpolymer type on reactive toughening |
7 |
| The relevance of material and processing parameters on the thermal conductivity of thermoplastic composites |
7 |
| Novel electroactive polyamide 12 based nanocomposites filled with reduced graphene oxide |
7 |
| Effect of molar ratio [NCO]/[OH] groups during prepolymer chains extending step on the morphology and selected mechanical properties of final bio-based thermoplastic poly(ether-urethane) materials |
6 |
| Three-dimensional printing alginate/gelatin scaffolds as dermal substitutes for skin tissue engineering |
6 |
| Thermal analysis of foamed polyethylene rotational molding followed by internal air temperature profiles |
6 |
| Morphological and mechanical properties of drawn poly(l-lactide) electrospun twisted yarns |
6 |
| Preparation and Characterization of Conductive Polyaniline/Silver Nanocomposite Films and Their Antimicrobial Studies |
6 |
| Thermal and rheological properties of modified polyhydroxybutyrate (PHB) |
6 |
| Facile Fabrication of PVA Composite Fibers with High Fraction of Multiwalled Carbon Nanotubes by Gel Spinning |
6 |
| The Mechanical, Thermal, Rheological and Morphological Properties of PLA/PBAT Blown Films by Using Bis(tert-butyl dioxy isopropyl) Benzene as Crosslinking Agent |
6 |
| Polyoxymethylene/ethylene butylacrylate copolymer/ethylene-methyl acrylate-glycidyl methacrylate ternary blends |
6 |
| Multiwalled carbon nanotube/montmorillonite hybrid filled ethylene-co-vinyl acetate nanocomposites with enhanced mechanical properties, thermal stability, and dielectric response |
6 |
