| FDM process parameters influence over the mechanical properties of polymer specimens: A review |
78 |
| Interlaminar bonding performance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling |
36 |
| Preparation and characterization of 3D printed continuous carbon fiber reinforced thermosetting composites |
30 |
| Rigid polyurethane foams reinforced with industrial potato protein |
27 |
| Basalt waste management in the production of highly effective porous polyurethane composites for thermal insulating applications |
27 |
| Preparation and characterization of polylactic acid (PLA) carbon nanotube nanocomposites |
24 |
| Application of sunflower husk, hazelnut shell and walnut shell as waste agricultural fillers for epoxy-based composites: A study into mechanical behavior related to structural and rheological properties |
23 |
| Preparation of chitosan/zinc oxide/Melissa officinalis essential oil nanocomposite film and evaluation of physical, mechanical and antimicrobial properties by response surface method |
21 |
| Prediction of complex modulus in phase-separated poly (lactic acid)/poly (ethylene oxide)/carbon nanotubes nanocomposites |
19 |
| Study on the isothermal decomposition kinetics and mechanism of nitrocellulose |
19 |
| Fabrication of antibacterial electrospun cellulose acetate/silver-sulfadiazine nanofibers composites for wound dressings applications |
19 |
| Rigid polyurethane foams reinforced with solid waste generated in leather industry |
19 |
| Biodegradability studies of poly(butylene succinate) composites filled with sugarcane rind fiber |
18 |
| Exploring the synergistic effect of short jute fiber and nanoclay on the mechanical, dynamic mechanical and thermal properties of natural rubber composites |
18 |
| Antibacterial properties of films of cellulose composites with silver nanoparticles and antibiotics |
17 |
| Polymer-based sensors: A review |
17 |
| Electrospun poly (butylene succinate)/cellulose nanocrystals bio-nanocomposite scaffolds for tissue engineering: Preparation, characterization and in vitro evaluation |
17 |
| Effects of sodium carbonate on the performance of epoxy and polyester coir-reinforced composites |
16 |
| Experimental and theoretical fracture toughness investigation of PUR foams under mixed mode I plus III loading |
16 |
| Keratin feathers as a filler for rigid polyurethane foams on the basis of soybean oil polyol |
15 |
| Effects of nozzle temperature and building orientation on mechanical properties and microstructure of PEEK and PEI printed by 3D-FDM |
15 |
| Agarose biopolymer coating on polyurethane sponge as host for catalytic silver metal nanoparticles |
15 |
| Simultaneous improvement of the fracture toughness and mechanical characteristics of amine-functionalized nano/micro glass fibril-reinforced epoxy resin |
15 |
| Creep and recovery behavior of injection-molded isotactic polypropylene with controllable skin-core structure |
15 |
| LF-NMR analysis of the water mobility, state and distribution in sorbitol plasticized polyvinyl alcohol films |
14 |
| Structural, mechanical and thermal behavior assessments of PCL/PHB blends reactively compatibilized with organic peroxides |
14 |
| Development of self-healing epoxy composites via incorporation of microencapsulated epoxy and mercaptan in poly(methyl methacrylate) shell |
14 |
| Enhancement of physical and reaction to fire properties of crude glycerol polyurethane foams filled with expanded graphite |
14 |
| Experimental determination of the quantity and distribution of chemical crosslinks in unaged and aged natural rubber, part 1: Peroxide vulcanization |
14 |
| Enhanced thermal stability and flame resistance of rigid polyurethane-imide foams by varying copolymer composition |
14 |
| Aminophenols formation from nitrophenols using agar biopolymer hydrogel supported CuO nanoparticles catalyst |
13 |
| Dielectric relaxations and conductivity of cross-linked PVA/SSA/GO composite membranes for fuel cells |
13 |
| Evaluation of the functionality of bio-based plastic mulching films |
13 |
| Electromagnetic interference shielding properties of polyvinylchloride (PVC), barium titanate (BaTiO3) and nickel oxide (NiO) based nanocomposites |
13 |
| Composites of rigid polyurethane foams and silica powder filler enhanced with ionic liquid |
13 |
| Comparing damage from low-velocity impact and quasi-static indentation in automotive carbon/epoxy and glass/polyamide-6 laminates |
13 |
| Performance improvement in nano-alumina filled silicone rubber composites by using vinyl tri-methoxysilane |
13 |
| Self-healing chitosan/vanillin hydrogels based on Schiff-base bond/hydrogen bond hybrid linkages |
13 |
| Evaluation of the functionality of bio-based food packaging films |
13 |
| Okra mucilage and corn starch bio-based film to be applied in food |
13 |
| Anisotropic mechanical property variance between ASTM D638-14 type i and type iv fused filament fabricated specimens |
13 |
| Cryogenic mechanical properties of epoxy resin toughened by hydroxyl-terminated polyurethane |
12 |
| Sisal-glass hybrid composites reinforced with silica microparticles |
12 |
| A new magneto-dynamic compression technique for magnetorheological elastomers at high frequencies |
12 |
| Enhanced mechanical and thermal properties of monocomponent high performance epoxy resin by blending with hydroxyl terminated polyethersulfone |
12 |
| Amine-terminated hyperbranched polyamide covalent functionalized graphene oxide-reinforced epoxy nanocomposites with enhanced toughness and mechanical properties |
12 |
| PBAT/kraft lignin blend in flexible laminated food packaging: Peeling resistance and thermal degradability |
12 |
| Investigating structural failure of a filament-wound composite tube subjected to internal pressure: Experimental and theoretical evaluation |
12 |
| A multistep methodology based on developed Takayanagi, Paul and Ouali models for tensile modulus of polymer/carbon nanotubes nanocomposites above percolation threshold assuming the contribution of interphase regions |
11 |
| Sesame protein isolate based bionanocomposite films incorporated with TiO2 nanoparticles: Study on morphological, physical and photocatalytic properties |
11 |
