| Influence of T-shape tip clearance on performance of a mixed-flow pump |
17 |
| Effects of vortex structure on performance characteristics of a multiblade fan with inclined tongue |
17 |
| Investigation of flow instability characteristics in a low specific speed centrifugal pump using a modified partially averaged Navier-Stokes model |
9 |
| Results of the International Wet Steam Modeling Project |
9 |
| Heat transfer enhancement of plate heat exchanger utilizing kaolin-including working fluid |
7 |
| Natural and forced convection heat transfer coefficients of various finned heat sinks for miniature electronic systems |
5 |
| Automatic optimization of a centrifugal pump based on impeller-diffuser interaction |
5 |
| Keeping warm: a review of deep geothermal potential of the UK |
5 |
| Numerical investigation of a highly loaded centrifugal compressor stage with a tandem bladed impeller |
5 |
| Experimental and numerical investigations of tip clearance flow and loss in a variable geometry turbine cascade |
5 |
| Analysis of the steam condensing flow in a linear blade cascade |
4 |
| Is the long-term sequestration of CO2 in and around deep, abandoned coal mines feasible? |
4 |
| Renewable energy storage in geological formations |
4 |
| Numerical study of the flame stability of premixed methane-air combustion in a combined porous-free flame burner |
4 |
| Investigation of transient flow characteristics inside a centrifugal compressor for design and off-design conditions |
4 |
| Exergoeconomic comparison and optimization of organic Rankine cycle, trilateral Rankine cycle and transcritical carbon dioxide cycle for heat recovery of low-temperature geothermal water |
4 |
| Numerical study of the effect of thermal boundary conditions and porous medium properties on the combustion in a combined porous-free flame burner |
4 |
| Transient natural convection flow between vertical concentric cylinders heated/cooled asymmetrically |
4 |
| Review of travelling-wave thermoacoustic electric-generator technology |
3 |
| Aero-thermal coupled through-flow method for cooled turbines with new cooling model |
3 |
| Effect of casing aspiration on the tip leakage flow in the axial flow compressor cascade |
3 |
| Numerical investigation of heat transfer and friction characteristics for turbulent flow in various corrugated tubes |
3 |
| An investigation on wind/PV/fuel cell/battery hybrid renewable energy system for nursing home in Istanbul |
3 |
| Chaotic baker map-based array reconfiguration in solar photo-voltaic systems under shading conditions |
3 |
| Recent developments and current position of underground coal gasification |
3 |
| Characterization of cavitation and seal damage during pump operation by vibration and motor current signal spectra |
3 |
| A combination application of tandem blade and endwall boundary layer suction in a highly loaded aspirated compressor outlet vane |
3 |
| Effects of the impeller-volute tongue interaction on the internal flow in a low-specific-speed centrifugal pump with splitter blades |
3 |
| Passive flow control of the corner separation in an annular compressor cascade with a micro-blade |
2 |
| Macroscopic spray characteristics of long-chain alcohol-biodiesel fuels in a constant volume chamber |
2 |
| High-performance ocean energy harvesting turbine design - Detailed flow analysis with blade leaning strategy |
2 |
| Performance-based fault diagnosis of a gas turbine engine using an integrated support vector machine and artificial neural network method |
2 |
| Numerical investigation on flow mechanisms of a squirrel cage fan |
2 |
| Flow mechanism of affecting an axial flow compressor performance and stability with cross-blade slot casing treatments |
2 |
| An experimental study of a flow-accelerating hydrokinetic device |
2 |
| Innovation enables shale development |
2 |
| A novel hybrid metaheuristic optimization method to estimate medium-term output power for horizontal axis wind turbine |
2 |
| Multi-fault diagnosis method for wind power generation system based on recurrent neural network |
2 |
| Supporting energy regulation by monitoring land motion on a regional and national scale: A case study of Scotland |
2 |
| An experience-independent inverse design optimization method of compressor cascade airfoil |
2 |
| Numerical investigation of tip flow dynamics and main flow characteristics with varying tip clearance widths for an axial-flow pump |
2 |
| Effect of the number of turbine blades on the air flow within a solar chimney power plant |
2 |
| Combined numerical and experimental investigations of heat transfer of a highly loaded low-pressure turbine blade under periodic inlet flow condition |
2 |
| Experimental and numerical study of the effect of main stage stratifier length on lean blow-out performance for a stratified partially premixed injector |
2 |
| Experimental research on pumping losses and combustion performance in an unthrottled spark ignition engine |
2 |
| Flow characteristic of a multistage radial turbine for supercritical compressed air energy storage system |
2 |
| Robust control design of variable speed wind turbine using quantitative feedback theory |
2 |
| Dynamic simulation of the circulating fluidized bed loop performance under the various operating conditions |
2 |
| Computational fluid dynamics investigation on the effect of co-firing semi-coke and bituminous coal in a 300MW tangentially fired boiler |
2 |
| Volute characteristics of centrifugal fan based on dynamic moment correction method |
2 |
