| Non-Newtonian mixed thermo-elastohydrodynamics of hypoid gear pairs |
20 |
| Piston ring-liner lubrication and tribological performance evaluation: A review |
10 |
| Study on the running torque of angular contact ball bearings subjected to angular misalignment |
7 |
| Effect of surface texturing on the dynamic characteristics of hydrodynamic journal bearing comprising concepts of green tribology |
7 |
| Modeling and analysis of the nonlinear indentation problems of functionally graded elastic layered solids |
6 |
| Polymer spur gears behaviors under different loading conditions: A review |
6 |
| Antiwear and extreme pressure performance of castor oil with nano-additives |
6 |
| Investigation on the rheological behavior of coconut oil based hybrid CeO2/CuO nanolubricants |
6 |
| Tribological behavior of various ceramic materials sliding against CF/PTFE/graphite-filled PEEK under seawater lubrication |
6 |
| Load and stiffness of a planar ferrofluid pocket bearing |
6 |
| Molecular dynamics simulation of subsurface damage mechanism during nanoscratching of single crystal silicon |
6 |
| Influence of granularity of grinding stone on grinding force and material removal in the rail grinding process |
6 |
| Friction and wear response of vegetable oils and their blends with mineral engine oil in a reciprocating sliding contact at severe contact conditions |
5 |
| Influence of air-induced vibration of aerostatic bearing on the machined surface quality in ultra-precision flycutting |
5 |
| Effects of thermal plasma surface hardening on wear and damage properties of rail steel |
5 |
| Performance analysis of cryogenically treated plus tempered carbide inserts in turning of Inconel 718 using cryogenic minimum quantity lubrication cooling technique |
5 |
| Enhancement of steady state performance of hydrodynamic journal bearing using chevron-shaped surface texture |
5 |
| Experimental study of the fretting wear behavior of Inconel 690 alloy under alternating load conditions |
4 |
| Analysis of general low-amplitude roughness in rolling-sliding elastohydrodynamic contacts including thermal effects |
4 |
| Analysis and comparison of steady-state performance characteristics of two-axial groove and multilobe hydrodynamic bearings lubricated with non-Newtonian fluids |
4 |
| Slurry jet erosion performance of high-velocity flame-sprayed nano mixed Ni-40Al(2)O(3) coating in aggressive environment |
4 |
| Friction studies of metal surfaces with various 3D printed patterns tested in dry sliding conditions |
4 |
| Modeling tangential contact based on non-Gaussian rough surfaces |
4 |
| Tribo-mechanical and surface morphological comparison of untextured, mechanical micro-textured (M mu T), and coated-M mu T cutting tools during machining |
4 |
| Enhancing the tribological and mechanical properties of M50 steel using solid lubricants - A detailed review |
4 |
| Thermomecanical study of high speed rolling element bearing: A simplified approach |
4 |
| Investigation of tool geometry in nanoscale cutting single-crystal copper by molecular dynamics simulation |
4 |
| Lubrication in hot die forging processes |
3 |
| Study on role of particle shape in erosion wear of austenitic steel using image processing analysis technique |
3 |
| Finite element analysis of fretting wear considering variable coefficient of friction |
3 |
| Effects of circumferential and axial grooves on the nonlinear oscillations of the full floating ring bearing supported turbocharger rotor |
3 |
| A comprehensive study of the effects of honing patterns on twin-land oil control rings friction using both a numerical model and a floating liner engine |
3 |
| Transient thermal analysis of mixed-elastohydrodynamic contact of high performance transmission in a dry sump environment |
3 |
| Dynamics and lubrication analyses of a planar multibody system with multiple lubricated joints |
3 |
| Ultrasonic roll bite measurements in cold rolling: Contact length and strip thickness |
3 |
| Abrasive grit size effect on wear depth of stir cast hybrid Al-Mg-Si composites at high stress condition |
3 |
| Influence of SiO2/MoS2/graphite content on the wear properties of PTFE composites under natural seawater lubrication |
3 |
| Numerical investigation of the effect of manufacturing errors in pads on the behaviour of tilting-pad journal bearings |
3 |
| Combined effect of surface roughness and pressure-dependent viscosity over couple-stress squeeze film lubrication between circular stepped plates |
3 |
| Styrene butadiene rubber as a viscosity improver: Experimental investigations and quantum chemical studies |
3 |
| Erosive-abrasive wear behavior of carbide-free bainitic and boron steels compared in simulated field conditions |
3 |
| Type and concentration effects of particulate solid lubricants on the microstructure, friction, and wear of electrodeposited Ni composite coatings |
3 |
| Effect of chemical heat treatment on cavitation erosion resistance of stainless steel |
3 |
| Effect of non-Newtonian lubrication of squeeze film conical bearing with the porous wall operating with Rabinowitsch fluid model |
3 |
| The combined effect of La and heat treatment on the tribological performances of tin-Babbitt alloy |
3 |
| Numerical analysis of the coupling between frictionally excited thermoelastic instability and thermal buckling in automotive clutches |
3 |
| Corrosion and tribological behaviour in a 3.5% NaCl solution of vacuum arc deposited ZrCN and Zr-Cr-Si-C-N coatings |
3 |
| Effects of the array modes of laser-textured micro-dimples on the tribological performance of cylinder liner-piston ring |
3 |
| Synergistic effect of Al2O3/TiO2 reinforcements on slurry erosion performance of nickel-based composite coatings |
3 |
| Size distribution analysis of wear particles in the transmission system of mining equipment |
3 |
