| Temperature effect and thermal impact in lithium-ion batteries: A review |
41 |
| MXene-2D layered electrode materials for energy storage |
35 |
| Functionalization of graphene materials by heteroatom-doping for energy conversion and storage |
21 |
| Fuel cell development for New Energy Vehicles (NEVs) and clean air in China |
20 |
| High efficiency synthesis of HKUST-1 under mild conditions with high BET surface area and CO2 uptake capacity |
15 |
| Flow and heat transfer behaviour of nanofluids in microchannels |
15 |
| Suitable energy platform significantly improves charge separation of g-C3N4 for CO2 reduction and pollutant oxidation under visible-light |
14 |
| Synthesis of ZnWO4-x nanorods with oxygen vacancy for efficient photocatalytic degradation of tetracycline |
14 |
| Effects of -NO2 and -NH2 functional groups in mixed-linker Zr-based MOFs on gas adsorption of CO2 and CH4 |
14 |
| Influence of minor boron on the microstructures of a second generation Ni-based single crystal superalloy |
12 |
| Flexible photodetector based on large-area few-layer MoS2 |
12 |
| Efficient inactivation of Staphylococcus aureus by silver and copper loaded photocatalytic titanate nanotubes |
11 |
| Enhanced microwave absorption properties of rod-shaped Fe2O3/Fe3O4/MWCNTs composites |
11 |
| Role of intrinsic dipole on photocatalytic water splitting for Janus MoSSe/nitrides heterostructure: A first-principles study |
10 |
| Effects of Gd solutes on hardness and yield strength of Mg alloys |
10 |
| Synthesis of magnetically recoverable visible-light-induced photocatalysts by combination of Fe3O4/ZnO with BiOI and polyaniline |
10 |
| Transition-metal-doped Fe2O3 nanoparticles for oxygen evolution reaction |
9 |
| Anisotropy of nickel-based superalloy K418 fabricated by selective laser melting |
9 |
| Role of support in photothermal carbon dioxide hydrogenation catalysed by Ni/CexTiyO2 |
9 |
| Dielectric properties, electrical modulus and current transport mechanisms of Au/ZnO/n-Si structures |
9 |
| Density functional theory calculations: A powerful tool to simulate and design high-performance energy storage and conversion materials |
8 |
| Effect of minor Sc on the microstructure and mechanical properties of AZ91 Magnesium Alloy |
8 |
| Enhanced flame-retardant performance of poly (lactic acid) (PLA) composite by using intrinsically phosphorus-containing PLA |
8 |
| Zr4+/F- co-doped TiO2(anatase) as high performance anode material for lithium-ion battery |
7 |
| Thermal atomic layer etching: Mechanism, materials and prospects |
7 |
| Reducing Zn diffusion in single axial junction InP nanowire solar cells for improved performance |
7 |
| Recent progress in theoretical and computational investigations of structural stability and activity of single-atom electrocatalysts |
6 |
| Recent progress in the simulation of microstructure evolution in titanium alloys |
6 |
| Recent advances in non-toxic quantum dots and their biomedical applications |
6 |
| Preparation and anisotropic thermophysical properties of SiC honeycomb/Al-Mg-Si composite via spontaneous infiltration |
6 |
| CoPt-Co hybrid supported on amino modified SiO2 nanospheres as a high performance catalyst for hydrogen generation from ammonia borane |
6 |
| Effect of cold rolling process on microstructure and mechanical properties of high strength beta titanium alloy thin sheets |
6 |
| Clean water generation with switchable dispersion of multifunctional Fe3O4-reduced graphene oxide particles |
6 |
| Hydrothermal synthesis of pyrrhotite (Fex-1S) nanoplates and their antibacterial, cytotoxic activity study |
6 |
| Improving the photocatalytic activity of graphitic carbon nitride by thermal treatment in a high-pressure hydrogen atmosphere |
6 |
| Noble-metal-free MoS2/Ta3N5 heterostructure photocatalyst for hydrogen generation |
6 |
| Inhomogeneous deformation and recrystallization behavior of through-thickness tantalum sheet under one-cycle clock-rolling |
6 |
| Enhanced electromagnetic absorption in ferrite and tantalum pentoxide based polypyrrole nanocomposite |
5 |
| Ga-In liquid metal nanoparticles prepared by physical vapor deposition |
5 |
| Numerical modeling of annular electromagnetic stirring with intercooling in direct chill casting of 7005 aluminum alloy billet |
5 |
| Development of lead-free multifunctional materials Bi(Co0.45Ti0.45Fe0.10)O-3 |
5 |
| Optimizing the fabrication of carbon nanotube electrode for effective capacitive deionization via electrophoretic deposition strategy |
4 |
| SnO2-montmorillonite composite for removal and inhibition Microcystis aeruginosa assisted by UV-light |
4 |
| Challenges in band alignment between semiconducting materials: A case of rutile and anatase TiO2 |
4 |
| Experimental investigation and thermodynamic assessment of the yttrium-hydrogen binary system |
4 |
| Oxidation behavior of high-strength FeCrAl alloys in a high-temperature supercritical carbon dioxide environment |
4 |
| Microstructure of ultrahigh carbon martensite |
4 |
| Fabrication and electrochemical properties of 3D nano-network LiFePO4@multiwalled carbon nanotube composite using risedronic acid as the phosphorus source |
4 |
| Highly active brookite TiO2-assisted photocatalytic degradation of dyes under the simulated solar - UVA radiation |
4 |
| Deformation and damage features of a Re/Ru-containing single crystal nickel base superalloy during creep at elevated temperature |
4 |
