| Solar cell efficiency tables (version 54) |
265 |
| Solar cell efficiency tables (Version 53) |
198 |
| Solar cell efficiency tables (version 52) |
127 |
| Solar cell efficiency tables (version 51) |
92 |
| Mass production of industrial tunnel oxide passivated contacts (i-TOPCon) silicon solar cells with average efficiency over 23% and modules over 345 W |
24 |
| Solar photovoltaics demand for the global energy transition in the power sector |
22 |
| Integrating a photovoltaic storage system in one device: A critical review |
16 |
| Tunnel oxide passivating electron contacts as full-area rear emitter of high-efficiency p-type silicon solar cells |
15 |
| 26.1%-efficient POLO-IBC cells: Quantification of electrical and optical loss mechanisms |
15 |
| Approaching 23% with large-area monoPoly cells using screen-printed and fired rear passivating contacts fabricated by inline PECVD |
15 |
| Understanding the light-induced degradation at elevated temperatures: Similarities between multicrystalline and floatzone p-type silicon |
15 |
| Field experience and performance analysis of floating PV technologies in the tropics |
12 |
| Efficiency increased to 15.2% for ultra-thin Cu(In,Ga)Se-2 solar cells |
11 |
| Effect of Cu-deficient layer formation in Cu(In,Ga)Se-2 solar-cell performance |
10 |
| Energy yield of all thin-film perovskite/CIGS tandem solar modules |
10 |
| High-performance low bandgap thin film solar cells for tandem applications |
10 |
| Influence of the electron buffer layer on the photovoltaic performance of planar Sb-2(SxSe1-x)(3) solar cells |
10 |
| Outdoor photoluminescence imaging of photovoltaic modules with sunlight excitation |
10 |
| Potential of very thin and high-efficiency silicon heterojunction solar cells |
10 |
| Solution-processed copper (I) thiocyanate (CuSCN) for highly efficient CdSe/CdTe thin-film solar cells |
9 |
| Characterization of dual-junction III-V on Si tandem solar cells with 23.7% efficiency under low concentration |
9 |
| Challenges facing copper-plated metallisation for silicon photovoltaics: Insights from integrated circuit technology development |
9 |
| Correlative transmission Kikuchi diffraction and atom probe tomography study of Cu(In,Ga)Se-2 grain boundaries |
9 |
| Back-contacted bottom cells with three terminals: Maximizing power extraction from current-mismatched tandem cells |
9 |
| Evaluating and predicting molecular mechanisms of adhesive degradation during field and accelerated aging of photovoltaic modules |
8 |
| Predicting photovoltaic soiling losses using environmental parameters: An update |
8 |
| Photovoltaic materials: Cu2ZnSnS4 (CZTS) nanocrystals synthesized via industrially scalable, green, one-step mechanochemical process |
8 |
| Bifacial Cu(In,Ga)Se-2 solar cells using hydrogen-doped In2O3 films as a transparent back contact |
8 |
| Enhancement of photovoltaic performances of Cu (In,Ga)(S,Se)(2) solar cell through combination of heat-light soaking and light soaking processes |
7 |
| Highly efficient and stable organic solar cell modules processed by blade coating with 5.6% module efficiency and active area of 216 cm(2) |
7 |
| Analysis of a novel CuCl2 back contact process for improved stability in CdTe solar cells |
7 |
| Tunnel oxide passivating electron contacts for high-efficiency n-type silicon solar cells with amorphous silicon passivating hole contacts |
7 |
| Device physics underlying silicon heterojunction and passivating-contact solar cells: A topical review |
7 |
| Alkali treatments of Cu(In,Ga)Se-2 thin-film absorbers and their impact on transport barriers |
7 |
| Effect of heat-bias soaking on cesium fluoride-treated CIGS thin film solar cells |
7 |
| Climate specific accelerated ageing tests and evaluation of ageing induced electrical, physical, and chemical changes |
7 |
| Impact of heat-light soaking on potassium fluoride treated CIGS solar cells with CdS buffer layer |
7 |
| Accurate control and characterization of Cu depletion layer for highly efficient Cu(In,Ga)Se-2 solar cells |
7 |
| High-throughput method to deposit continuous composition spread Sb-2(SexS1 (-) (x))(3) thin film for photovoltaic application |
7 |
| Solution-processed ZnO as the efficient passivation and electron selective layer of silicon solar cells |
7 |
| The Product Environmental Footprint (PEF) of photovoltaic modules-Lessons learned from the environmental footprint pilot phase on the way to a single market for green products in the European Union |
7 |
| Analysis for efficiency potential of high-efficiency and next-generation solar cells |
7 |
| Semi-transparent plastic solar cell based on oxide-metal-oxide multilayer electrodes |
6 |
| Two-step selenization using nozzle free Se shower for Cu(In,Ga)Se-2 thin film solar cell |
6 |
| Evolution of cell cracks in PV-modules under field and laboratory conditions |
6 |
| Bandgap engineered smart three-terminal solar cell: New perspectives towards very high efficiencies in the silicon world |
6 |
| Scaling limits to large area perovskite solar cell efficiency |
6 |
| Comprehensive electrical loss analysis of monolithic interconnected multi-segment laser power converters |
6 |
| Toward scalable perovskite-based multijunction solar modules |
6 |
| Optical properties and performance of pyramidal texture silicon heterojunction solar cells: Key role of vertex angles |
6 |
