| Grain Refinement and Texture Evolution of Mg-Gd-Y-Zn-Zr Alloy Processed by Repetitive Usetting-extrusion at Decreasing Temperature |
11 |
| Microstructure and Mechanical Properties of ZL205A Aluminum Alloy Wall Produced by Wire Arc Additive Manufacturing |
9 |
| Influence of Atomizing Gas and Cooling Rate on Solidification Characterization of Nickel-based Superalloy Powders |
6 |
| Microstructure and Properties of ZL114A Aluminum Alloy Prepared by Wire Arc Additive Manufacturing |
6 |
| Review on Joining Process of Carbon Fiber-Reinforced Polymer and Metal: Methods and Joining Process |
5 |
| Review on Joining Process of Carbon Fiber-reinforced Polymer and Metal: Applications and Outlook |
5 |
| Effects of Additives Doping on the Wettability and Contact Resistance of Ag-SnO2 Contact Material |
4 |
| Biocompatible MgO Film on Titanium Substrate Prepared by Sol-gel Method |
4 |
| Orientation Dependence of Low Cycle Fatigue Properties of a Ni-based Single Crystal Superalloy DD10 |
4 |
| Finite Element Analysis of Surface Roughness Generated by Multiple Laser Shock Peening |
4 |
| Corrosion Resistance of Titanium Alloy OCTG in Severe Environment |
4 |
| EBSD Analysis of Nugget Zone in Dissimilar Friction Stir Welded AA2024-AA7075 Joint Along Weld Thickness |
4 |
| Preparation and Characterization of Pt-CeO2/C as Catalyst for Direct Ethanol Fuel Cell |
4 |
| Effect of Electroplating Nickel Inter-layer on Performance of Ti-based Lead Dioxide Electrodes |
3 |
| Microstructure and Property of Inconel 738 Alloy by Selective Laser Melting Forming |
3 |
| Effect of Sr Modification on Microstructures and Mechanical Properties of Al3Ti/ADC(12) Composites |
3 |
| Ablation Resistance of APS Sprayed Mullite/ZrB2-MoSi2 Coating for Carbon/Carbon Composites |
3 |
| Dislocation Structure in a Single Crystal Nickel Base Superalloy During High Cycle Fatigue at 870 degrees C |
3 |
| Molecular Dynamics Simulation of Nano Single Crystal Gamma-TiAl Alloy Strain Rate Effect |
3 |
| Microstructure Model of AZ31 Magnesium Alloy Based on Cellular Automaton |
3 |
| Synthesis of Stoichiometric Titanium Carbide by a Combination of Carbothermal Reduction and Molten Salt Method and Its Characterization |
3 |
| Friction and Wear Performance of in-Situ (TiC+TiB)/Ti6Al4V Composites |
3 |
| Microstructure and Tribological Properties of CrN Films Deposited by Direct Current Magnetron Sputtering |
3 |
| Effects of Heat Treatment on Microstructure and Mechanical Properties of Selective Laser Melting IN718 |
3 |
| High Temperature Mechanical Properties of TC4 Titanium Alloy Honeycomb Panel |
3 |
| Overview on the Microstructure and Mechanical Properties of Ultrafine-grained Al-Li Alloys Produced by Severe Plastic Deformation |
3 |
| On the Pilger Rolling of Zr-4 Alloy: Finite Element Modeling and Plastic Deformation Behavior |
3 |
| Preparation of Titanium by SOM Electrolytic Process from Ultrafine High Titanium Slag |
3 |
| Photocatalytic Activity and Photodegradation Rate Constant of Au-TiO2 Nanofilms by Magnetron Sputtering |
3 |
| Prediction of Flow Stresses for a Typical Nickel-Based Superalloy During Hot Deformation Based on Dynamic Recrystallization Kinetic Equation |
3 |
| Growth and Excellent Field Emission Properties of GaN Nanopencils and Nanotowers |
3 |
| Effect of Trace Elements La, Ti and Homogenization on Electrical Properties of Pure Aluminum |
3 |
| Microstructure and Properties of Sn2.5Ag0.7Cu0.1RE0.05Ni/Cu Solder Joints Obtained by External Energy Assisted Soldering |
3 |
| Design and Development of New beta Titanium Alloys with High Strength, Large Ductility and Improved Strain-hardening Behavior |
3 |
| Microstructure Characterization of Friction Stir Welded 2099 Al-Li Alloy |
3 |
| Failure MechanismsofTi-Al3Ti metal-Intermetallic Laminate Composites Under High-Speed Impact |
3 |
| Effect of Hot-rolling Temperature on Microstructure and Dynamic Mechanical Properties of Ti-6Al-4V Alloy |
3 |
| Microstructure and Grain Refinement Performance of a New Al-5Nb-RE-B Master Alloy |
3 |
| Review on Silicon-Based Anode Materials for Lithium-Ion Battery |
3 |
| Fabrication of g-C3N4/MoS2 Nanosheet Heterojunction by Facile Ball Milling Method and Its Visible Light Photo-catalytic Performance |
3 |
| Microscopic Phase-field Simulation for the Influence of Aging Process on the Precipitation Process of Ni75Al15Ti10 Alloy |
3 |
| Effect of Over-Temperature on Microstructure and High Cycle Fatigue Properties of DD6 Single Crystal Superalloy |
3 |
| Preparation and Thermoelectric Properties of (Ca0.96D0.04)MnO3 (D=Ca, Sr, Rb, Sm) |
3 |
| Sound Absorption Characteristics and Structure Optimization of Gradient Fibrous Porous Materials |
2 |
| Influence of delta Phase on Strength and Toughness of GH4169 Alloy |
2 |
| Microstructure Evolution of 617B Ni-based Superalloy during Long-Term Aging |
2 |
| In-situ Synthesis and Properties of Porous Cobalt Sulfide Nanoneedle Bundles Arrays on Nickel Foam as Electrodes for Supercapacitors |
2 |
| Effects of SiCp Content on the Microstructure and Mechanical Properties of SiCp/Mg-5Al-2Ca Composites |
2 |
| Dynamic Globularization Behavior of O-phase Lamellae in Ti-22AI-25Nb (at%) Alloy during Deformation at Elevated Temperatures |
2 |
| Effect of Cryogenic Treatment Prior to Rolling on Micro-structure and Mechanical Properties of AZ31 Magnesium Alloy |
2 |
