| Role of Cu element in biomedical metal alloy design |
23 |
| Self-healing alginate-carboxymethyl chitosan porous scaffold as an effective binder for silicon anodes in lithium-ion batteries |
19 |
| Recent progress in carbon/lithium metal composite anode for safe lithium metal batteries |
18 |
| A scalable synthesis of silicon nanoparticles as high-performance anode material for lithium-ion batteries |
17 |
| Cycle stability of lithium/garnet/lithium cells with different intermediate layers |
16 |
| Antibacterial ability and cytocompatibility of Cu-incorporated Ni-Ti-O nanopores on NiTi alloy |
16 |
| High-performance anode materials for Na-ion batteries |
16 |
| Improving anode performances of lithium-ion capacitors employing carbon-Si composites |
15 |
| Corrosion resistance of Mg(OH)(2)/Mg-Al-layered double hydroxide coatings on magnesium alloy AZ31: influence of hydrolysis degree of silane |
14 |
| Preparation and electrochemical properties of Sn/C composites |
13 |
| Bifunctional metal-organic frameworks toward photocatalytic CO2 reduction by post-synthetic ligand exchange |
11 |
| Corrosion resistance of nanostructured magnesium hydroxide coating on magnesium alloy AZ31: influence of EDTA |
11 |
| Rechargeable solid-state Li-air batteries: a status report |
11 |
| NASICON-structured Na3.1Zr1.95Mg0.05Si2PO12 solid electrolyte for solid-state sodium batteries |
10 |
| Carbon and few-layer MoS2 nanosheets co-modified TiO2 nanosheets with enhanced electrochemical properties for lithium storage |
10 |
| Effects of clinical dental implant abutment materials and their surface characteristics on initial bacterial adhesion |
10 |
| Thermoelectric performance of p-type zone-melted Se-doped Bi0.5Sb1.5Te3 alloys |
10 |
| Photocatalytic degradation of environmental perilous gentian violet dye using leucaena-mediated zinc oxide nanoparticle and its anticancer activity |
9 |
| Electrochemical performance of Li-rich cathode material, 0.3Li(2)MnO(3)-0.7LiMn(1/3)Ni(1/3)Co(1/3)O(2) microspheres with F-doping |
9 |
| Preparation and tribological behavior of electrodeposited Ni-W-GO composite coatings |
9 |
| Facile synthesis of Zn(II)-doped g-C3N4 and their enhanced photocatalytic activity under visible light irradiation |
9 |
| Anode material NbO for Li-ion battery and its electrochemical properties |
9 |
| Structural stability improvement, Williamson Hall analysis and band-gap tailoring through A-site Sr doping in rare earth based double perovskite La2NiMnO6 |
9 |
| Adsorption and desorption properties for rhenium using a kind of weak-base anion resin |
9 |
| Construction of TiO2/silane nanofilm on AZ31 magnesium alloy for controlled degradability and enhanced biocompatibility |
9 |
| Lithium cobaltate: a novel host material enables high-rate and stable lithium-sulfur batteries |
8 |
| Correlation between process parameters, grain size and hardness of friction-stir-welded Cu-Zn alloys |
8 |
| Flexible ultrathin all-solid-state supercapacitors |
8 |
| Enhanced performance of solid-state Li-O-2 battery using a novel integrated architecture of gel polymer electrolyte and nanoarray cathode |
8 |
| Correlation of microstructure and magnetic properties in Sm(CobalFe0.1Cu0.1Zr0.033)(6.93) magnets solution-treated at different temperatures |
8 |
| Improved electrical transport properties and optimized thermoelectric figure of merit in lithium-doped copper sulfides |
8 |
| Enhanced thermoelectric performance of CoSbS0.85Se0.15 by point defect |
8 |
| Few-layered ReS2 nanosheets grown on graphene as electrocatalyst for hydrogen evolution reaction |
7 |
| Swelling of clay minerals in ammonium leaching of weathered crust elution-deposited rare earth ores |
7 |
| Progress in organic photocatalysts |
7 |
| Synergetic effect of BiOCl/Bi12O17Cl2 and MoS2: in situ DRIFTS investigation on photocatalytic NO oxidation pathway |
7 |
| Preparation of 3D ordered mesoporous anatase TiO2 and their photocatalytic activity |
7 |
| Electrochemical performance of Al2O3 pre-coated spinel LiMn2O4 |
7 |
| Preparation of Ti-Nb-Ta-Zr alloys for load-bearing biomedical applications |
7 |
| Rotational motion of polyanion versus volume effect associated with ionic conductivity of several solid electrolytes |
7 |
| Poly(ethylene carbonate)-based electrolytes with high concentration Li salt for all-solid-state lithium batteries |
6 |
| Crystallization mechanism of glass-ceramics prepared from stainless steel slag |
6 |
| Polymer electrolyte with composite cathode for solid-state Li-CO2 battery |
6 |
| Synthesis of TiO2@ZnIn2S4 hollow nanospheres with enhanced photocatalytic hydrogen evolution |
6 |
| Hydrothermal synthesis mechanism and electrochemical performance of LiMn0.6Fe0.4PO4 cathode material |
6 |
| Biocorrosion properties of Ti-3Cu alloy in F ion-containing solution and acidic solution and biocompatibility |
6 |
| Effect of plating bath composition on chemical composition and oxygen reduction reaction activity of electrodeposited Pt-Co catalysts |
6 |
| Solvothermal synthesis of nano-CeO2 aggregates and its application as a high-efficient arsenic adsorbent |
6 |
| BiCuSeO as state-of-the-art thermoelectric materials for energy conversion: from thin films to bulks |
6 |
| The microstructure of a single crystal superalloy after different aging heat treatments |
6 |
