| Simulation of wheel tracking test for asphalt mixture using discrete element modelling |
32 |
| Investigating the performance, chemical, and microstructure properties of carbon nanotube-modified asphalt binder |
20 |
| Feasibility study of RAP aggregates in cement concrete pavements |
19 |
| Recognition of asphalt pavement crack length using deep convolutional neural networks |
16 |
| Performance evaluation of dry process crumb rubber-modified asphalt mixtures with nanomaterial |
14 |
| Proposing a new infrared index quantifying the aging extent of SBS-modified asphalt |
12 |
| Improvement of storage stability of SBS-modified asphalt with nanoclay using a new mixing method |
11 |
| Experimental evaluation of rice husk ash and fly ash as alternative fillers in hot-mix asphalt |
11 |
| Studies on surface energy of asphalt and aggregate at different scales and bonding property of asphalt-aggregate system |
10 |
| Comparison of low-temperature fracture and strength properties of asphalt mixture obtained from IDT and SCB under different testing configurations |
10 |
| Effect of moisture on the cohesion of asphalt mastics and bonding with surface of aggregates |
10 |
| Evaluating fatigue resistance of toner-modified asphalt binders using the linear amplitude sweep test |
10 |
| Effect of fibre reinforcement on CBR behaviour of lime-blended expansive soils: reliability approach |
9 |
| The evolution of the mechanical behaviour of cold recycled mixtures stabilised with cement and bitumen: field and laboratory study |
9 |
| Study of the influence of nano-TiO2 on the properties of Portland cement concrete for application on road surfaces |
8 |
| Resilient modulus of subgrade materials for mechanistic-empirical pavement design guide |
8 |
| Transient unsaturated flow in the drainage layer of a highway: solution and drainage performance |
8 |
| Microwave crack healing on conventional and modified asphalt mixtures with different additives: an experimental approach |
8 |
| Spectral element method for dynamic response of transversely isotropic asphalt pavement under impact load |
7 |
| Pervious concrete pavement incorporating GGBS to alleviate pavement runoff and improve urban sustainability |
7 |
| Cracking performance characterisation of asphalt mixtures containing reclaimed asphalt pavement with hybrid binder |
7 |
| Improvement of a clayey soil with alkali activated low-calcium fly ash for transport infrastructures applications |
7 |
| Investigation of anisotropic flow in asphalt mixtures using the X-ray image technique: pore structure effect |
7 |
| Numerical modelling of ravelling in porous friction courses (PFC) |
7 |
| Laboratory and field evaluation of cold recycling mixture with foamed asphalt |
7 |
| Utilisation of construction and demolition materials with clay for road pavement subgrade |
7 |
| Comparison on properties of cement-stabilised gravel prepared by different laboratory compaction methods |
7 |
| Preparation and properties of modified asphalt using branch SBS/nanoclay nanocomposite as a modifier |
7 |
| Predicting thermal cracking of asphalt pavements from bitumen and mix properties |
7 |
| Fracture simulation of asphalt concrete with randomly generated aggregate microstructure |
7 |
| Influence of aggregates' spatial characteristics on air-voids in asphalt mixture |
7 |
| Impact of compaction method on mechanical characteristics of unbound granular recycled materials |
7 |
| Experimental application of waste glass powder filler in recycled dense-graded asphalt mixtures |
6 |
| Nanomaterial and fatigue cracking of hot mix asphalt |
6 |
| Effect of cross-linking agent on ethylene vinyl acetate/polyoctenamer modified bitumen |
6 |
| Development and performance evaluation of epoxy asphalt concrete modified with glass fibre |
6 |
| Study on flexural strength, modulus, and fatigue cracking of cementitiously stabilised materials |
6 |
| Relationships between the chemistry and the physical properties of bitumen |
6 |
| Recycling of aged asphalt binders with wax warm additives |
6 |
| Rheological performance of soybean in asphalt binder modification |
6 |
| Temperature distribution of asphalt bridge deck pavement with groundwater circulation temperature control system under high- and low-temperature conditions |
6 |
| Influence of crumb rubber and tafpack super on performances of SBS modified porous asphalt mixtures |
6 |
| Evaluating the mastic distribution of asphalt mixtures based on a new thickness threshold using 2D image planers |
6 |
| The strength behaviour of lime-stabilised plastic fibre-reinforced clayey soil |
6 |
| Effect of blending conditions on nano-clay bitumen nanocomposite properties |
6 |
| Mives multicriteria assessment of urban-pavement conditions: application to a case study in Barcelona |
6 |
| Design of bituminous pavements - a performance-related approach |
6 |
| Optimum content of nano-silica to ensure proper performance of an asphalt binder |
6 |
| Influence of particle shape on aggregate mixture's performance: DEM results |
6 |
| Effect of cumulative traffic and statistical predictive modelling of field skid resistance |
6 |
