| A review on nanocomposite hydrogels and their biomedical applications |
16 |
| A review on the intensification of metal matrix composites and its nonconventional machining |
6 |
| Comparison of the mechanical and wear behaviour of aluminium alloy with homogeneous and functionally graded silicon nitride composites |
6 |
| Surface integrity in wire-EDM tangential turning of in situ hybrid metal matrix composite A359/B4C/Al2O3 |
6 |
| Reinforcing polypropylene with calcium carbonate of different morphologies and polymorphs |
6 |
| Recent advances in the manufacturing processes of functionally graded materials: a review |
5 |
| Free and forced vibration analysis of rectangular/circular/annular plates made of carbon fiber-carbon nanotube-polymer hybrid composites |
5 |
| Progress in the research and applications of natural fiber-reinforced polymer matrix composites |
5 |
| Improving flame-retardant, thermal, and mechanical properties of an epoxy using halogen-free fillers |
4 |
| Mechanical and wear properties of polyetheretherketone composites filled with basalt fibres |
4 |
| Design of and with thin-ply non-crimp fabric as building blocks for composites |
4 |
| A critical review on the development and performance of polymer/graphene nanocomposites |
4 |
| Effect of modified layered double hydroxide on the flammability and mechanical properties of polypropylene |
4 |
| Study of one-dimensional cure simulation applicable conditions for thick laminates and its comparison with three-dimensional simulation |
4 |
| Structural behavior of load-bearing sandwich wall panels with GFRP skin and a foam-web core |
4 |
| Photocatalytic activity of Cu2O/ZnO nanocomposite for the decomposition of methyl orange under visible light irradiation |
4 |
| Fabrication, mechanical, thermal, and electrical characterization of epoxy/silica composites for high-voltage insulation |
4 |
| Investigation of three-body wear of dental materials under different chewing cycles |
4 |
| Effect of the meso-structure on the strain concentration of carbon-carbon composites with drilling hole |
3 |
| Thermal conductivity of unidirectional composites consisting of randomly dispersed glass fibers and temperature-dependent polyethylene matrix |
3 |
| Effects of NiO content on the microstructure and mechanical properties of AgSnO2NiO composites |
3 |
| Analytical solution on dosage of self-healing capsules in materials with two-dimensional multi-shaped crack patterns |
3 |
| Enhanced dielectric properties of BaTiO3 ceramics with cerium doping, manganese doping and Ce-Mn co-doping |
3 |
| Investigation of wear behavior of nanoalumina and marble dust-reinforced dental composites |
3 |
| Analysis on the impact response of fiber-reinforced composite laminates: an emphasis on the FEM simulation |
3 |
| Effect of alkali treatment on the flexural properties of a Luffa cylindrica-reinforced epoxy composite |
3 |
| A model on the curved shapes of unsymmetric laminates including tool-part interaction |
3 |
| Overall buckling behaviour of laminated CFRP tubes with off-axis ply orientation in axial compression |
3 |
| Effect of reinforcements on polymer matrix bio-composites - an overview |
3 |
| Thermal degradation of coir fiber reinforced low-density polyethylene composites |
3 |
| Dielectric and thermal properties of magnesium oxide/poly(aryl ether ketone) nanocomposites |
2 |
| Experimental investigation and analysis on the wear properties of glass fiber and CNT reinforced hybrid polymer composites |
2 |
| Preparation and characterization of low-cost high-performance mullite-quartz ceramic proppants for coal bed methane wells |
2 |
| Effects of nano-SiO2 on mechanical and hygric behaviors of glass fiber reinforced epoxy composites |
2 |
| Reinforcing abilities of microfibers and nanofibrillated cellulose in poly(lactic acid) composites |
2 |
| Effect of granulometric distribution on electromagnetic shielding effectiveness for polymeric composite based on natural graphite |
2 |
| Utilization of tailings in cement and concrete: A review |
2 |
| The simulation of the warpage rule of the thin-walled part of polypropylene composite based on the coupling effect of mold deformation and injection molding process |
2 |
| Simulation on impact response of FMLs: effect of fiber stacking sequence, thickness, and incident angle |
2 |
| Torsional vibration of functionally graded carbon nanotube reinforced conical shells |
2 |
| An investigation on dry sliding wear behaviour of pressure infiltrated AA1050-XMg/B4C composites |
2 |
| Effect of Cutting Temperature on Bending Properties of Carbon Fibre Reinforced Plastics |
2 |
| Artificial neural network for predicting the flexura bond strength of FRP bars in concrete |
2 |
| Investigation and optimization of the electro-discharge machining parameters of 2024 aluminum alloy and Al/7.5% Al2O3 particulate-reinforced metal matrix composite |
2 |
| Cyclic behavior of GFRP strengthened infilled RC frames with low and normal strength concrete |
2 |
| Influence of nano-SiO2 on the bonding strength and wear resistance properties of polyurethane coating |
2 |
| Thermal cycling of composite laminates made of out-of-autoclave materials |
2 |
| Developing polymer composite-based leaf spring systems for automotive industry |
2 |
| Negative effect of clay fillers on the polyvinyl alcohol biodegradation: technical note |
2 |
| The influence of the WC-Co composite microstructure model on stress field heterogeneity at the microstructure level: FEM based study |
2 |
