| Experimental evaluation of strain and strain rate during rapid cooling friction stir welding of pure copper |
20 |
| Microstructures and mechanical properties of a welded CoCrFeMnNi high-entropy alloy |
16 |
| Effect of post weld heat treatment on weldability of high entropy alloy welds |
15 |
| Review of research progress on aluminium-magnesium dissimilar friction stir welding |
15 |
| Characterisation of 4043 aluminium alloy deposits obtained by wire and arc additive manufacturing using a Cold Metal Transfer process |
14 |
| Friction-stir lap-joining of aluminium-magnesium/poly-methyl-methacrylate hybrid structures: thermo-mechanical modelling and experimental feasibility study |
14 |
| Laser welding/brazing of 5182 aluminium alloy to ZEK100 magnesium alloy using a nickel interlayer |
13 |
| Impact of liquid metal embrittlement cracks on resistance spot weld static strength |
13 |
| Friction stir welding industrialisation and research status |
13 |
| Role of base-metal composition in isothermal solidification during diffusion brazing of nickel-based superalloys |
11 |
| Parametric effect on dissimilar friction stir welded steel-magnesium alloys joints: a review |
11 |
| Understanding the factors controlling the interfacial failure strength of advanced high-strength steel resistance spot welds: hardness vs. fracture toughness |
11 |
| Fabrication of SS316L-IN625 functionally graded materials by powder-fed directed energy deposition |
11 |
| Bobbin tool friction stir welding: a review |
11 |
| Experimental and thermomechanical analysis of friction stir welding of poly(methyl methacrylate) sheets |
10 |
| 'Cold spray plus ' as a new hybrid additive manufacturing technology: a literature review |
9 |
| Microstructure and properties of WC reinforced Ni-based composite coatings with Y2O3 addition on titanium alloy by laser cladding |
9 |
| Improving austenitic stainless steel resistance spot weld quality using external magnetic field |
9 |
| Rapid prototyping of 4043 Al-alloy parts by cold metal transfer |
9 |
| Intermetallic phase formation during brazing of a nickel alloy using a Ni-Cr-Si-Fe-B quinary filler alloy |
9 |
| Friction stir scribe welding technique for dissimilar joining of aluminium and galvanised steel |
9 |
| Effect of pressure on solidification cracking susceptibility of Al-Si alloys |
8 |
| Microstructural evolution mechanism during brazing of Hastelloy X superalloy using Ni-Si-B filler metal |
8 |
| Influence of base material properties on copper and aluminium-copper explosive welds |
8 |
| Effect of process parameters on the quality of aluminium alloy Al5Si deposits in wire and arc additive manufacturing using a cold metal transfer process |
8 |
| Microstructure and mechanical properties of dissimilar welds between 16Mn and 304L in underwater wet welding |
8 |
| Evolution of bonding interface during ultrasonic welding between steel and aluminium alloy |
8 |
| Evolution of Microstructure and mechanical properties of selective laser melted Ti-5Al-5V-5Mo-3Cr after heat treatments |
7 |
| Effect of rotation speed on microstructure and mechanical properties of bobbin tool friction stir welded AZ61 magnesium alloy |
7 |
| Functionally graded structures of refractory metals by wire arc additive manufacturing |
7 |
| Mitigation of thermal distortion in wire arc additively manufactured Ti6Al4V part using active interpass cooling |
7 |
| In situ postweld heat treatment of transformation induced plasticity steel resistance spot welds |
7 |
| Measurement of residual stresses in dissimilar friction stir-welded aluminium and copper plates using the contour method |
7 |
| Role of interfacial reaction on the mechanical performance of Al/steel dissimilar refill friction stir spot welds |
7 |
| Microstructure evolution and fracture behaviour of friction stir welded 6061-T6 thin plate joints under high rotational speed |
7 |
| Pathways to improve the austenite-ferrite phase balance during resistance spot welding of duplex stainless steels |
7 |
| Material flow and void defect formation in friction stir welding of aluminium alloys |
7 |
| Effect of pulse scheme on the microstructural evolution, residual stress state and mechanical performance of resistance spot welded DP1000-GI steel |
7 |
| Experiment and prediction of weld morphology for laser oscillating welding of AA6061 aluminium alloy |
7 |
| In-process control of distortion in wire and arc additive manufacturing based on a flexible multi-point support fixture |
6 |
| Acicular ferrite and bainite in C-Mn and low-alloy steel arc weld metals |
6 |
| Numerical modelling and experimental investigation of thermal and material flow in probeless friction stir spot welding process of Al 2198-T8 |
6 |
| Effects of thread interruptions on tool pins in friction stir welding of AA6061 |
6 |
| Ultrahigh-strength friction stir spot welds of aluminium alloy obtained by Fe3O4 nanoparticles |
5 |
| Residual stress in a restrained specimen processed by post-weld ultrasonic impact treatment |
5 |
| Effect of welding time on fatigue properties of friction stir spot welds of Al to carbon fibre-reinforced plastic |
5 |
| Printability of 316 stainless steel |
5 |
| Suppression of liquid metal embrittlement in resistance spot welding of TRIP steel |
5 |
| Magnetic pulse welding: machine optimisation for aluminium tubular joints production |
5 |
| Mechanical properties of low-transformation-temperature weld metals after low-temperature postweld heat treatment |
5 |
