| Thermal and Mechanical Behavior of Composite Mortars Containing Natural Sorptive Clays and Fly Ash |
5 |
| Mirostructure and Microhardness of Aluminum-Copper Composite Reinforced with Multi-Walled Carbon Nanotubes prepared by Vacuum Sintering and Hot Isostatic Pressing Techniques |
5 |
| Sintering in Global Material Perspective |
4 |
| The Effect of Sintering Temperature on Cu-Cnts Nano Composites Properties Produced by Pm Method |
4 |
| Physical Properties of Sintered Alumina Doped with Different Oxides |
4 |
| Use of Sintering to Immobilize Toxic Metals Present in Galvanic Sludge into a Stabile Glass-Ceramic Structure |
4 |
| Development of an Energy- and Water-Saving Manufacturing Technology of Brick Products |
4 |
| Novel Approach for Determination of Potentially Toxic Elements via ICP-OES in Aqueous Solutions of Building Materials with Industrial Byproduct Addition |
3 |
| Growth of Significantly Low Dimensional Zinc Orthotitanate (Zn2TiO4) Nanoparticles by Solid State Reaction Method |
3 |
| Effect of Chemical Composition on Microstructural Properties and Sintering Kinetics of (Ba,Sr) TiO3 Powders |
3 |
| Compressive Strength and Thermal Properties of Spark Plasma Sintered Al-Al2O3 Nanocomposite |
3 |
| The Influence of Alumino-Silicate Matrix Composition on Surface Hydrophobic Properties |
3 |
| Inflence of Cadmium Substitution in Magnesium Ferrites on Structral and Mechanical Properties |
3 |
| Microstructure, Wear and Corrosion Properties of NiB-TiC Composite Materials Produced By Powder Metallurgy Method |
3 |
| Thermal, Ceramic and Technological Properties of Clays used in Production of Roofing Tiles - Principal Component Analysis |
2 |
| The Influence of Barium Ferrite Nanoparticles on Morphological and Mechanical Properties of Ethyl Cellulose Based Nanocomposites |
2 |
| A Comparison of Mechanical Properties and Microstructures of PM Steels With Chemical Compositions Fe-(1-3)%Mn-0.8%C |
2 |
| Microstructure and Phase Composition of the Two-Phase Ceramic Synthesized from Titanium Oxide and Zinc Oxide |
2 |
| Effect of Al(OH)(3) Content on the Microstructure and Strength of Porous Cordierite-Mullite Ceramics Prepared by an In-Situ Pore Forming Technique |
2 |
| Effect of Reduced Al2O3 Mole Ratio on Fabrication of Cordierite Ceramic by Solid-State Sintering Method |
2 |
| Effect of deposition current density and annealing temperature on the microstructure and magnetic properties of nanostructured Ni-Fe-W-Cu alloys |
2 |
| Influence of Temperature and Different Hydroxides on Properties of Activated Carbon Prepared From Saccharose. Characterization, Thermal Degradation Kinetic and Dyes Removal From Water Solutions |
2 |
| Synthesis and Characterization of Ag-8 %wt Cr2O3 Composites Prepared by Different Densification Processes |
2 |
| The Fractal Nature Approach in Ceramics Materials and Discrete Field Simulation |
2 |
| Structure and photocatalytic properties of sintered TiO2 nanotube arrays |
2 |
| Effect of B4C Reinforcement Ratio and Sintering Temperature on the Mechanical Behavior in Al-B4C Composites |
2 |
| Dense Zircon (ZrSiO4) Ceramics by a Simple Milling-Sintering Route |
2 |
| The Effect of Nepheline Syenite Addition on Pyroplastic Deformation of Sanitarywares |
2 |
| Structural, Morphological and Electrical Properties of Multi-Doped Calcium Phosphate Materials as Solid Electrolytes for Intermediate Temperature Solid Oxide Fuel Cells |
2 |
| Characterization of MgAl2O4 Sintered Ceramics |
2 |
| Numerical Modeling of the Porosity Influence on Strength of Structural Materials |
1 |
| Dense Alumina-Mullite Composite Ceramics from Alumina and Spodumene-albite Feldspar binary mixtures: Processing and Properties |
1 |
| Sintering Effect on Electrical Properties and Morphology of Lead-Free Na0.92K0.08NbO3 Ceramics |
1 |
| Towards a High Strength Ductile Ni/Ni3Al/Ni Multilayer Composite using Spark Plasma Sintering |
1 |
| Effects of Different Sintering Temperatures on Thermal, Physical, and Morphological of SiO2-Na2O-CaO-P2O5 Based Glass-ceramic System from Vitreous and Ceramic Wastes |
1 |
| Impact of Alumina Particles on the Morphology and Mechanics of Hybrid Wood Plastic Composite Materials |
1 |
| Adsorption of Nicotine from Aqueous Solutions on Montmorillonite and Acid-Modified Montmorillonite |
1 |
| Mechanical and Corrosion Properties of AlCu Matrix Hybrid Composite Materials |
1 |
| The Study of Pelletizing of Mixed Hematite and Magnetite Ores |
1 |
| Enhancing Physical-Thermal-Mechanical Properties of Fired Clay Bricks by Eggshell as a Bio-Filler and Flux |
1 |
| Influence of Mechanical Activation of a Cordierite-Based Filler on Sedimentation Stability of Lost Foam Refractory Coatings |
1 |
| Electrochemical and Structural Properties of Ni(II)-alumina Composites as an Annealing Temperature Function |
1 |
| Effect of the Degree of Plastic Deformation on the Thermal Electromotive Force of Cu-X5crni1810 Steel Thermocouple |
1 |
| Alumina Particles Doped With Ferric as Efficient Adsorbent for Removal of Reactive Orange 16 from Aqueous Solutions |
1 |
| Some Features of Mass Transfer in Composite Materials |
1 |
| Improving the Packaging Performance of Low-Density Polyethylene With PCL/Nanocellulose/Copper(II)Oxide Barrier Layer |
1 |
| Non-Isothermal Crystallization of Lithium Germanophosphate Glass Studied by Different Kinetic Methods |
1 |
| Processes Connected With Local Laser Heating of TiB2 Armor Ceramics |
1 |
| The Densification Behavior of Metals and Alloys During Spark Plasma Sintering: A Mini-Review |
1 |
| Effect of Silver Nanoparticless in the Structure and Mechanical Properties of Mullite/Ag Cermets |
1 |
