| Review on Modeling and Simulation of Blast Furnace |
24 |
| Reduction of Iron Oxides with Hydrogen-A Review |
19 |
| Review on Modeling and Simulation of Continuous Casting |
18 |
| Review on Modeling and Simulation of Electroslag Remelting |
12 |
| Effect of Cerium on the Behavior of Inclusions in H13 Steel |
12 |
| Effects of Grain Size on Mechanical Properties and Work-Hardening Behavior of AISI 304 Austenitic Stainless Steel |
9 |
| Review on Modeling and Simulation of the Electric Arc Furnace (EAF) |
9 |
| Refined Bainite Microstructure and Mechanical Properties of a High-Strength Low-Carbon Bainitic Steel Treated by Austempering Below and Above M-S |
9 |
| Effect of Oxide Inclusions on the Magnetic Properties of Non-Oriented Electrical Steel |
8 |
| The Correlation of Macrostructure, Microstructure, and Texture with Room Temperature Mechanical Properties of a Twinning-Induced Plasticity Automotive Steel after Friction Stir Spot Welding/Processing |
8 |
| Review on Computational Modeling and Visualization of the Ironmaking Blast Furnace at Purdue University Northwest |
8 |
| Refinement of Banded Structure via Thermal Cycling and Its Effects on Mechanical Properties of Dual Phase Steel |
7 |
| Boron in Heat-Treatable Steels: A Review |
6 |
| The Effect of Stress on Bainite Transformation, Microstructure, and Properties of a Low-Carbon Bainitic Steel |
6 |
| Investigating the Properties of Coil Tail in Ti-Nb-Mo Microalloyed Hot-Rolled Strip |
6 |
| Evolutionary Data Driven Modeling and Multi Objective Optimization of Noisy Data Set in Blast Furnace Iron Making Process |
6 |
| Microstructure and Obdurability Improvement Mechanisms of the La-Microalloyed H13 Steel |
6 |
| Exploring the Particle Reconfiguration in the Metallic Materials under the Pulsed Electric Current |
6 |
| Effect of Strain Rate on Deformation Resistance during Ausforming in Fe-C-Mn-Si High-Strength Bainite Steels |
6 |
| The Effect of a High Al Content on the Variation of the Total Oxygen Content in the Steel Melt during a Secondary Refining Process |
5 |
| Effect of the Fluid-Dynamic Structure on the Mixing Time of a Ladle Furnace |
5 |
| High Efficiency Dephosphorization by Mixed Injection during Steelmaking Process |
5 |
| Effect of the Slag Composition and a Protective Atmosphere on Chemical Reactions and Non-Metallic Inclusions during Electro-Slag Remelting of a Hot-Work Tool Steel |
5 |
| The Formation and Growth of Sulfides in Free-Cutting Stainless Steel |
5 |
| Review, Analysis, and Modeling of Continuous Casting Tundish Systems |
5 |
| Revealing the Fracture Mechanism of Twinning-Induced Plasticity Steels |
5 |
| A Review of Steel Scrap Melting in Molten Iron-Carbon Melts |
5 |
| Thermal and Fluid-Dynamic Optimization of a Five Strand Asymmetric Delta Shaped Billet Caster Tundish |
5 |
| Effect of Cooling Rate on Oxide Inclusions During Solidification of 304 Stainless Steel |
5 |
| Effect of Intercritical Annealing on Mechanical Properties and Work-Hardening Response of High Formability Dual Phase Steel |
5 |
| Review of Mold Fluxes for Continuous Casting of High-Alloy (Al, Mn, Ti) Steels |
5 |
| Gas-Solid Reduction Behavior of In-flight Fine Hematite Ore Particles by Hydrogen |
4 |
| Characterization Transformation of Inclusions Using Rare Earth Ce Treatment on Al-Killed Titanium Alloyed Interstitial Free Steel |
4 |
| Warm Stamping Technology of the Medium Manganese Steel |
4 |
| Microstructural Evolution and Dynamic Partitioning Behavior in Quenched and Partitioned Steels |
4 |
| Co-Precipitation Behavior of MnS and AlN in a Low-Carbon Steel |
4 |
| Effect of Ti-Mg Treatment on the Impact Toughness of Heat Affected Zone in 0.15%C-1.31%Mn Steel |
4 |
| Genetic Algorithm-Based Variable Selection in Prediction of Hot Metal Desulfurization Kinetics |
4 |
| Effect of Micro-Alloy Elements on Dynamic Recrystallization Behavior of a High-Manganese Steel |
4 |
| Desulfurization of Iron Ores: Processes and Challenges |
4 |
| Comparison of Microstructure and Tensile Properties of Dual Phase Steel Welded Using Friction Stir Welding and Gas Tungsten Arc Welding |
4 |
| Effect of Solidification Pressure on Thermodynamic and Kinetic Parameters of 19Cr14Mn4Mo0.9N High Nitrogen Steel |
4 |
| Modeling on the Fluid Flow and Mixing Phenomena in a RH Steel Degasser with Oval Down-Leg Snorkel |
4 |
| Study on the Electromagnetic Field, Fluid Flow, and Solidification in a Bloom Continuous Casting Mold by Numerical Simulation |
4 |
| Multiphase Flow in a Five-Strand Tundish Using Trumpet Ladle Shroud during Steady-State Casting and Ladle Change-Over |
4 |
| Hot Deformation Behavior and Microstructural Evolution of SA508-IV Steel |
4 |
| Transformation Behavior and Properties of Carbide-Free Bainite Steels with Different Si Contents |
4 |
| Effect of Heat Input on the Microstructure and Mechanical Properties of Low Alloy Ultra-High Strength Structural Steel Welded Joint |
4 |
| Property Investigations of Low-Grade Vanadium-Titanium Magnetite Pellets with Different MgO Contents |
4 |
| Effects of Rolling Temperature on the Microstructure and Mechanical Properties in an Ultrafine-Grained Low-Carbon Steel |
4 |
