| An Improved Bearing Fault Diagnosis Method using One-Dimensional CNN and LSTM |
15 |
| Numerical Study of Heat Transfer Enhancement for Low-Pressure Flows in a Square Cavity with Two Fins Attached to the Hot Wall Using Al2O3-Air Nanofluid |
9 |
| Nonlinear Control of a Flexible Joint Robotic Manipulator with Experimental Validation |
9 |
| Effects of Advanced Manufacturing Technologies on Manufacturing Company Performance |
8 |
| Elastocaloric Cooling: State-of-the-art and Future Challenges in Designing Regenerative Elastocaloric Devices |
6 |
| Exergetic Performance Prediction of a Roughened Solar Air Heater Using Artificial Neural Network |
6 |
| Design Methodology for Coplanar Axes Line Gear with Controllable Sliding Rate |
5 |
| Modelling and Prediction of Thrust Force and Torque in Drilling Operations of AI7075 Using ANN and RSM Methodologies |
5 |
| Analysis of EDM Process Parameters on Inconel 718 Using the Grey-Taguchi and Topsis Methods |
5 |
| Studying the Effect of Thermal Fatigue on Multiple Cracks Propagating in an SS316L Thin Flange on a Shaft Specimen Using a Multi-Physics Numerical Simulation Model |
5 |
| An Analysis of the Surface Geometric Structure and Geometric Accuracy of Cylindrical Gear Teeth Manufactured with the Direct Metal Laser Sintering (DMLS) Method |
5 |
| Motion Planning for Highly Automated Road Vehicles with a Hybrid Approach Using Nonlinear Optimization and Artificial Neural Networks |
4 |
| A Weighted Mean Square Error Approach to the Robust Optimization of the Surface Roughness in an AISI 12L14 Free-Machining Steel-Turning Process |
4 |
| Cutting Forces and Surface Roughness in Face-Milling of SKD61 Hard Steel |
4 |
| Unsteady Pressures Influenced by Trapped Air Pockets in Water-Filled Pipelines |
4 |
| Fatigue of Cellular Structures - a Review |
4 |
| Analysis of the Bulk Coal Transport State of a Scraper Conveyor Using the Discrete Element Method |
4 |
| Effects of Joint Clearance on the Motion Accuracy of Robotic Manipulators |
4 |
| Multi-Objective Optimization of the Dressing Parameters in Fine Cylindrical Grinding |
4 |
| Studying the Fatigue Life of a Non-pneumatic Wheel by Using Finite-Life Design for Life Prediction |
3 |
| Grounding Characteristics of a Non-Pneumatic Mechanical Elastic Tire in a Rolling State with a Camber Angle |
3 |
| A Fault Feature Extraction Method for a Gearbox with a Composite Gear Train Based on EEMD and Translation-Invariant Multiwavelet Neighbouring Coefficients |
3 |
| Research on the Hill Start Assist of Commercial Vehicles Based on Electronic Parking Brake System |
3 |
| An Experimental Study of Composite Plain Bearings: The Influence of Clearance on Friction Coefficient and Temperature |
3 |
| Compressive Response Determination of Closed-Cell Aluminium Foam and Linear-Elastic Finite Element Simulation of mu CT-Based Directly Reconstructed Geometrical Models |
3 |
| A Gage Study Applied in Shear Test to Identify Variation Causes from a Resistance Spot Welding Measurement System |
3 |
| Images of the Machined Surface in Evaluation of the Efficiency of a Micro-Smoothing Process |
3 |
| Distributed Manufacturing Systems with Digital Agents |
3 |
| Multi-Physics and Multi-Scale Meshless Simulation System for Direct-Chill Casting of Aluminium Alloys |
3 |
| Cavitation as a Potential Technology for Wastewater Management - An Example of Enhanced Nutrient Release from Secondary Pulp and Paper Mill Sludge |
3 |
| Physical-Mechanical Characterization of Moriche Natural Fibre (Mauritia flexuosa) and Composite with Bio-epoxy Resin |
2 |
| Experimental Investigation of an Automotive Air Conditioning System Using R444A and R152a Refrigerants as Alternatives of R134a |
2 |
| Effect of Coating Thickness on a Solid-Liquid Two-Phase Flow Centrifugal Pump under Water Medium |
2 |
| The Importance of Friction Coefficient between Vehicle Tyres and Concrete Safety Barrier to Vehicle Rollover - FE Analysis Study |
2 |
| Study on Grindability of Inconel 718 Superalloy Fabricated by Selective Laser Melting (SLM) |
2 |
| A Brief Survey of Preparation and Heat Transfer Enhancement of Hybrid Nanofluids |
2 |
| Trajectory Tracking Study of Track Vehicles Based on Model Predictive Control |
2 |
| The Influence of External Conditions on the Mechanical Properties of Resin-bonded Grinding Wheels |
2 |
| Control System Design for a Centrifuge Motion Simulator Based on a Dynamic Model |
2 |
| A Weighted Gradient Projection Method for Inverse Kinematics of Redundant Manipulators Considering Multiple Performance Criteria |
2 |
| Construction of Water Surface Topography Using LIDAR Data |
2 |
| Double-layer Control of an Automatic Mechanical Transmission Clutch during Commercial Vehicle Start-up |
2 |
| Fuzzy Hybrid Method for the Reconstruction of 3D Models Based on CT/MRI Data |
2 |
| Determination of the Effect of Cold Working Compression on Residual Stress Reduction in Quenched Aluminium Alloy 2219 Block |
2 |
| Study of Influential Parameters of the Sphere Indentation Used for the Control Function of Material Properties in Forming Operations |
2 |
| Fault Diagnosis Method Based on Modified Multiscale Entropy and Global Distance Evaluation for the Valve Fault of a Reciprocating Compressor |
1 |
| Surface Modification and Wear Properties of Direct Metal Laser Sintered Hybrid Tools Used in Moulds |
1 |
| Judging Method of Tooth Damage Behavior of the High Speed Milling Cutter |
1 |
| A Cyber-Physical System for Surface Roughness Monitoring in End-Milling |
1 |
| Introduction of Welds into the Dynamic Model of Laminated Structures |
1 |
