| Application of superhydrophobic coatings as a corrosion barrier: A review |
59 |
| Enhanced corrosion and wear resistance properties of carbon fiber reinforced Ni-based composite coating by laser cladding |
43 |
| Carbonaceous mudstone and lignin-derived activated carbon and its application for supercapacitor electrode |
34 |
| Graphene coated carbon felt as a high-performance electrode for all vanadium redox flow batteries |
32 |
| Sol-gel deposition of hydroxyapatite coatings on porous titanium for biomedical applications |
26 |
| A review of electrodeposited Ni-Co alloy and composite coatings: Microstructure, properties and applications |
25 |
| Coating biodegradable magnesium alloys with electrospun poly-L-lactic acid-akermanite-doxycycline nanofibers for enhanced biocompatibility, antibacterial activity, and corrosion resistance |
24 |
| Laser shock peening of laser additive manufactured Ti6Al4V titanium alloy |
21 |
| Superhydrophobic carbon nanotubes/epoxy nanocomposite coating by facile one-step spraying |
21 |
| Wear properties and microstructural analyses of Fe-based coatings with various WC contents on H13 die steel by laser cladding |
21 |
| Effects of laser power on microstructure and properties of laser cladded CoCrBFeNiSi high-entropy alloy amorphous coatings |
20 |
| Effect of combined shot peening and ultrasonic nanocrystal surface modification processes on the fatigue performance of AISI 304 |
20 |
| Effects of graphene nano-platelets (GNPs) on the microstructural characteristics and textural development of an Al-Mg alloy during friction stir processing |
20 |
| Electrodeposition of Ni-P alloy coatings: A review |
20 |
| Improvement of mechanical properties and anticorrosion performance of epoxy coatings by the introduction of polyaniline/graphene composite |
19 |
| In vitro degradation behavior, antibacterial activity and cytotoxicity of TiO2-MAO/ZnHA composite coating on Mg alloy for orthopedic implants |
18 |
| Room and elevated temperature sliding wear behavior of cold sprayed Ni-WC composite coatings |
18 |
| Microstructure and mechanical properties of Inconel 625 fabricated by wire-arc additive manufacturing |
18 |
| A promising SPEEK/MCM composite membrane for highly efficient vanadium redox flow battery |
18 |
| Microstructural characterization and corrosion behaviour of AlCoCrFeNiTix high-entropy alloy coatings fabricated by laser cladding |
18 |
| Microstructural design of self-lubricating laser claddings for use in high temperature sliding applications |
18 |
| The potential of glycerol and phenol towards H-2 production using steam reforming reaction: A review |
18 |
| Effect of tempering on laser remelted AISI H13 tool steel |
17 |
| Piezoelectric ZnO thin films for 2DOF MEMS vibrational energy harvesting |
17 |
| Self-degradation of micro-arc oxidation/chitosan composite coating on Mg-4Li-1Ca alloy |
17 |
| Improved hardness and wear resistance of plasma sprayed nanostructured NiCrBSi coating via short-time heat treatment |
17 |
| Erosion wear performance of WC-10Co4Cr and Cr3C2-25NiCr coatings sprayed with high-velocity thermal spray processes |
17 |
| Microstructural, protective, inhibitory and semiconducting properties of PEO coatings containing CeO2 nanoparticles formed on AZ31 Mg alloy |
16 |
| Evaluation of the residual stress and microstructure character in SAF 2507 duplex stainless steel after multiple shot peening process |
16 |
| Evaluation of protective coatings for offshore applications. Corrosion and tribocorrosion behavior in synthetic seawater |
16 |
| A V2O5-nanosheets-coated hard carbon fiber fabric as high-performance anode for sodium ion battery |
16 |
| Fabrication of superhydrophobic coating on magnesium alloy with improved corrosion resistance by combining micro-arc oxidation and cyclic assembly |
16 |
| The study of electrodeposition of hydroxyapatite-ZrO2-TiO2 nanocomposite coatings on 316 stainless steel |
16 |
| Structural characteristics and high-temperature oxidation behavior of HVOF sprayed nano-CeO2 reinforced NiCoCrAlY nanocomposite coatings |
16 |
| Evaluation of the adhesion and failure mechanism of the hard CrN coatings on different substrates |
16 |
| Synthesis and characterization of Ni-B/Al2O3 nanocomposite coating by electrodeposition using trimethylamine borane as boron precursor |
15 |
| Bioactive Zn-doped hydroxyapatite coatings and their antibacterial efficacy against Escherichia coli and Staphylococcus aureus |
15 |
| Enhanced corrosion resistance and in-vitro biodegradation of plasma electrolytic oxidation coatings prepared on AZ91 Mg alloy using ZnO nanoparticles-incorporated electrolyte |
15 |
| Green and timesaving fabrication of a superhydrophobic surface and its application to anti-icing, self-cleaning and oil-water separation |
15 |
| Highly oxidation resistant and cost effective MCrAlY bond coats prepared by controlled atmosphere heat treatment |
15 |
| Highly oxidation resistant MCrAlY bond coats prepared by heat treatment under low oxygen content |
15 |
| Vacuum heat treatment mechanisms promoting the adhesion strength of thermally sprayed metallic coatings |
15 |
| Development of surface composite based on Al-Cu system by friction stir processing: Evaluation of microstructure, formation mechanism and wear behavior |
15 |
| Process parameter optimisation of laser clad iron based alloy: Predictive models of deposition efficiency, porosity and dilution |
15 |
| Stearic acid modified zinc nano-coatings with superhydrophobicity and enhanced antifouling performance |
15 |
| Enhancement of toughness and wear resistance by CrN/CrCN multilayered coatings for wood processing |
15 |
| Mechanical, wear, corrosion and biological properties of arc deposited titanium nitride coatings |
15 |
| In-situ TiC-TiB2 coating on Ti-6Al-4V alloy by tungsten inert gas (TIG) cladding method: Part-I. Microstructure evolution |
15 |
| Low temperature thin films for next-generation microelectronics (invited) |
15 |
| The influence of positive pulses on HiPIMS deposition of hard DLC coatings |
15 |
