| A study of laser cladding NiCrBSi/Mo composite coatings |
15 |
| A perspective review on the bonding mechanisms in cold gas dynamic spray |
14 |
| Pulse electrodeposited RuO2 electrodes for high-performance supercapacitor applications |
10 |
| Fabrication and characterisation of functionally graded Ni-P coatings with improved wear and corrosion resistance |
10 |
| Ni-B/SiC nanocomposite coating obtained by pulse plating and evaluation of its electrochemistry and mechanical properties |
10 |
| Ni-P-TiO2 nanocomposite coatings with uniformly dispersed Ni3Ti intermetallics: effects of TiO2 nanoparticles concentration |
10 |
| Electrodeposition of Ni-Mo and Ni-Mo-(nano Al2O3) multilayer coatings |
9 |
| Evaluation of mechanical properties of Ti6Al4V cold sprayed coatings |
9 |
| High performance Co-Cr3C2 composite coating by jet electrodeposition |
9 |
| Novel photocatalytic coatings based on tin oxide semiconductor |
8 |
| Polysilazane-based coatings: corrosion protection and anti-graffiti properties(dagger) |
8 |
| Preparation of super-hydrophobic surface on Al-Mg alloy substrate by electrochemical etching |
8 |
| Fabrication and drag reduction of superhydrophobic surface on steel substrates |
7 |
| Corrosion and fouling behaviours of copper-based superhydrophobic coating |
7 |
| Novel approach to fabricate a stable superhydrophobic polycarbonate |
7 |
| Influence of cold gas spray processing conditions on the properties of 316L stainless steel coatings |
7 |
| Cold spray deposition to prevent fouling of polymer surfaces |
7 |
| Plasma electrolytic oxidation coatings with fungicidal properties(*) |
7 |
| Microstructural and mechanical characterisation of electroplated nickel matrix composite coatings |
6 |
| Influence of pH on the growth behaviour of Mg-Al LDH films |
6 |
| Aluminium to steel resistance spot welding with cold sprayed interlayer |
6 |
| Metallisation of polycarbonates using a low pressure cold spray method |
6 |
| Low-temperature plasma treatment of carbon fibre/epoxy resin composite |
6 |
| Microstructure and corrosion resistance of yellow MAO coatings |
6 |
| Microstructure and properties of Fe5Cr5SiTiCoNbMoW coating by laser cladding |
6 |
| In situ synthesised WC reinforced nickel coating by laser cladding |
6 |
| Investigation of water jet peening process parameters on AL6061-T6 |
6 |
| Novel performances of in situ plasma nitriding-PVD duplex-treated nanocrystalline TiN coatings |
6 |
| Preparation of corrosion-resisting superhydrophobic surface on aluminium substrate |
6 |
| High-temperature tribological studies of plasma-nitrided tool steels |
6 |
| Robust hydrophobic coating on glass surface by an atmospheric-pressure plasma jet for plasma-polymerisation of hexamethyldisiloxane conjugated with (3-aminopropyl) triethoxysilane |
6 |
| Surface mechanical and self-lubricating properties of MWCNT impregnated aluminium surfaces |
6 |
| Improvement of anti-corrosive and anti-oxidative properties of electroless Ni-P coating |
6 |
| Substrate effect on electrodeposited copper morphology and crystal shapes |
5 |
| Fabrication of a robust superhydrophobic polyurethane sponge for oil-water separation |
5 |
| A green and facile method to fabricate superhydrophobic coatings |
5 |
| Construction of a superhydrophobic coating using triethoxyvinylsilane-modified silica nanoparticles |
5 |
| Fabrication of icephobic aluminium surfaces by atmospheric plasma jet polymerisation |
5 |
| The corrosion behaviours of plasma-sprayed Fe-based amorphous coatings |
5 |
| Fabrication of superhydrophobic titanium dioxide coating on AISI 316L stainless steel by electrophoretic deposition and using trimethoxy(propyl)silane modification |
5 |
| Improvement of wear resistance for carburised steel by Ti depositing and plasma nitriding |
5 |
| Preparation and performance enhancements of wear-resistant, transparent PU/SiO2 superhydrophobic coating |
5 |
| Effect of MgO micro-powder on the characteristics of micro-arc oxidation coatings |
5 |
| Performance evaluation of HVOF sprayed WC-10Co4Cr coatings under slurry erosion |
5 |
| On surface modification of austenitic stainless steel using microwave processed Ni/Cr3C2 composite cladding |
5 |
| Surface modification of polypropylene non-woven fabric for improving its hydrophilicity |
5 |
| Tribological properties of microarc oxidation coatings on Zirlo alloy |
5 |
| Synthesis, microstructural, corrosion and antimicrobial properties of Zn and Zn-Al coatings |
5 |
| Effect of flame remelting on microstructure and wear behaviour of plasma sprayed NiCrBSi-30%Mo coating |
4 |
| Surface treatment response of AISI 2205 and AISI 304L steels: SMAT and plasma-nitriding |
4 |
