| Self-Lubricating PTFE-Based Composites with Black Phosphorus Nanosheets |
27 |
| Cavitation Erosion Behaviors of a Nickel-Free High-Nitrogen Stainless Steel |
27 |
| Use of X-ray Computed Tomography to Investigate Rolling Contact Cracks in Plasma Sprayed Fe-Cr-B-Si Coating |
25 |
| Friction Modifier Additives, Synergies and Antagonisms |
13 |
| Thermal Conductivity and Flash Temperature |
12 |
| Review of Viscosity Modifier Lubricant Additives |
12 |
| Film Thickness and Friction of ZDDP Tribofilms |
10 |
| Diprotic Ammonium Succinate Ionic Liquid in Thin Film Aqueous Lubrication and in Graphene Nanolubricant |
9 |
| Vacuum Tribological Performance of WS2-MoS2 Composite Film Against Oil-Impregnated Porous Polyimide: Influence of Oil Viscosity |
9 |
| M50 Matrix Sintered with Nanoscale Solid Lubricants Shows Enhanced Self-lubricating Properties Under Dry Sliding at Different Temperatures |
9 |
| Insight into the Viscous and Adhesive Contributions to Hydrogel Friction |
8 |
| Rheological Properties of Liquids Under Conditions of Elastohydrodynamic Lubrication |
8 |
| Graphene Nanoplatelet (GNP)-Incorporated AZ31 Magnesium Nanocomposite: Microstructural, Mechanical and Tribological Properties |
8 |
| An In Situ Method for Simultaneous Friction Measurements and Imaging of Interfacial Tribochemical Film Growth in Lubricated Contacts |
8 |
| Tribological Characteristics of Aqueous Graphene Oxide, Graphitic Carbon Nitride, and Their Mixed Suspensions |
8 |
| Direct Formation of Lubricious and Wear-Protective Carbon Films from Phosphorus- and Sulfur-Free Oil-Soluble Additives |
8 |
| Experimental Investigation on the Compatibility of Nanoparticles with Vegetable Oils for Nanofluid Minimum Quantity Lubrication Machining |
8 |
| The Effect of Lubricant Composition on White Etching Crack Failures |
7 |
| Experimental and Numerical Study of Micropitting Initiation in Real Rough Surfaces in a Micro-elastohydrodynamic Lubrication Regime |
7 |
| Tribological Performance of Graphene and PTFE Solid Lubricants for Polymer Coatings at Elevated Temperatures |
7 |
| Effect of Water Incorporation on the Lubrication Characteristics of Synthetic Oils |
7 |
| A Novel Surface Texture Shape for Directional Friction Control |
7 |
| The Evolution of White Etching Cracks (WECs) in Rolling Contact Fatigue-Tested 100Cr6 Steel |
7 |
| Friction-Induced Inflammation |
6 |
| Measuring Evolution of Transfer Film-Substrate Interface Using Low Wear Alumina PTFE |
6 |
| Thixotropic Mechanics in Soft Hydrated Sliding Interfaces |
6 |
| Hydrodynamic Friction of Viscosity-Modified Oils in a Journal Bearing Machine |
6 |
| Investigation of PTFE Tribological Properties Using Molecular Dynamics Simulation |
6 |
| Antiwear Properties of Binary Ashless Blend of Phosphonium Ionic Liquids and Borate Esters in Partially Formulated Oil (No Zn) |
6 |
| Use of FIB to Study ZDDP Tribofilms |
6 |
| Thermal Desorption Analysis of Hydrogen in Non-hydrogen-Charged Rolling Contact Fatigue-Tested 100Cr6 Steel |
6 |
| 3D Measurements of Lubricant and Surface Temperatures Within an Elastohydrodynamic Contact |
6 |
| Surface Reaction Films from Amine-Based Organic Friction Modifiers and Their Influence on Surface Fatigue and Friction |
6 |
| Correlation Between Engine Oil Degradation, Tribochemistry, and Tribological Behavior with Focus on ZDDP Deterioration |
6 |
| On the Degradation of Tribo-components in Boundary and Mixed Lubrication Regimes |
6 |
| The Competing Effects of Counterface Peaks and Valleys on the Wear and Transfer of Ultra-Low Wear Alumina-PTFE |
6 |
| Stability of Metal Matrix Composite Pads During High-Speed Braking |
6 |
| Elastic Contact Mechanics of Randomly Rough Surfaces: An Assessment of Advanced Asperity Models and Persson's Theory |
6 |
| On the Origin of Frictional Energy Dissipation |
5 |
| The Influence of Cu/Fe Ratio on the Tribological Behavior of Brake Friction Materials |
5 |
| Lubrication Properties of the Ionic Liquid Dodecyl-3 Methylimidazolium bis(trifluoromethylsulfonyl)imide |
5 |
| On the Role of Material Transfer in Friction Between Metals: Initial Phenomena and Effects of Roughness and Boundary Lubrication in Sliding Between Aluminium and Tool Steels |
5 |
| Effect of Porosity and Normal Load on Dry Sliding Friction of Polymer Foam Blocks |
5 |
| Effect of Upper Bainite on Wear Behaviour of High-Speed Wheel Steel |
5 |
| Deformation, Wear and Microstructural Evolution of Nano-structured Pearlite Under Repeated Contact Sliding |
5 |
| On the Modeling of Adhesive Wear with Consideration of Loading Sequence |
5 |
| How Sliding and Hydrodynamics Contribute to Articular Cartilage Fluid and Lubrication Recovery |
5 |
| Molecular Layering in Nanometer-Confined Lubricants |
5 |
| Engine Oils in the Field: A Comprehensive Chemical Assessment of Engine Oil Degradation in a Passenger Car |
5 |
| Vibration and Noise Behaviors During Stick-Slip Friction |
5 |
