| Biobased Green Lubricants: Physicochemical, Tribological and Toxicological Properties of Fatty Acid Ionic Liquids |
11 |
| Effect of Wettability Enhancement of SiC Particles on Impact Toughness and Dry Sliding wear Behavior of Compocasted A356/20SiCp Composites |
9 |
| New EHL Modeling Data for the Reference Liquids Squalane and Squalane Plus Polyisoprene |
7 |
| Tribological Characterisation of Graphene Oxide as Lubricant Additive on Hypereutectic Al-25Si/Steel Tribopair |
7 |
| Optimization of Pocket Geometry for Friction Reduction in Piston-Liner Contacts |
6 |
| A Model for Shear Degradation of Lithium Soap Grease at Ambient Temperature |
6 |
| Lubricant Effects on White Etching Cracking Failures in Thrust Bearing Rig Tests |
6 |
| Influence of Thermal Fatigue on the Wear Behavior of Brake Discs Sliding against Organic and Semimetallic Friction Materials |
6 |
| Friction and Wear Phenomena of Vegetable Oil-Based Lubricants with Additives at Severe Sliding Wear Conditions |
6 |
| Interactive Effect between Organic Friction Modifiers and Additives on Friction at Metal Pushing V-Belt CVT Components |
6 |
| A Master Curve for the Shear Degradation of Lubricating Greases with a Fibrous Structure |
6 |
| The Friction and Wear Properties of Metal-Doped DLC Films under Current-Carrying Condition |
5 |
| Tribological Performance of Halogen-Free Ionic Liquids in Steel-Steel and DLC-DLC Contacts |
5 |
| Reciprocating Sliding Wear Behavior of 60NiTi As Compared to 440C Steel under Lubricated and Unlubricated Conditions |
5 |
| Ionic Liquid Additives for Mixed and Elastohydrodynamic Lubrication |
5 |
| Influence of Viscosity and Magnetoviscous Effect on the Performance of a Magnetic Fluid Seal in a Water Environment |
5 |
| Friction and Wear Behaviors of TiN Coatings under Dry and Vacuum Conditions |
5 |
| Investigation into the Normal Contact Stiffness of Rough Surface in Line Contact Mixed Elastohydrodynamic Lubrication |
4 |
| Mixed Lubrication Modeling of Reciprocating Seals Based on a Developed Multiple-Grid Method |
4 |
| Tribological Investigations of Silicon Nitride Lubricated by Ionic Liquid Aqueous Solutions |
4 |
| Inertia Effect on the Load Capacity of Large Water-Lubricated Thrust Bearing |
4 |
| In Situ Raman Observations of the Formation of MoDTC-Derived Tribofilms at Steel/Steel Contact Under Boundary Lubrication |
4 |
| The Microstructure of Calcium Sulfonate Complex Lubricating Grease and Its Change in the Presence of Water |
4 |
| Thermal Elastohydrodynamic Lubrication of Ceramic Materials |
4 |
| Experimental Study on Wear Behaviors of TBM Disc Cutter Ring in Hard Rock Conditions |
4 |
| Estimation of Generated Axial Force Considering Rolling-Sliding Friction in Tripod-Type Constant Velocity Joint |
4 |
| New Stress-Based Fatigue Life Models for Ball and Roller Bearings |
4 |
| White Etching CrackingSimulation in Bearing Rig and Bench Tests |
4 |
| Numerical and Experimental Studies of a Wet Multidisc Clutch on Temperature and Stress Fields Excited by the Concentrated Load |
4 |
| On the Shear Stability of Dry and Water-Contaminated Calcium Sulfonate Complex Lubricating Greases |
3 |
| Statistical Analysis of HTHS Viscosity Rating of Present-Day Engine Oils |
3 |
| Study on the Effect of Track Curve Radius on Friction-Induced Oscillation of a Wheelset-Track System |
3 |
| Tool Wear Prediction and Surface Improvement in Vibration Cutting |
3 |
| Rheological Considerations on Polymer-Based Engine Lubricants: Viscosity Index Improvers versus ThickenersGeneralized Newtonian Models |
3 |
| A Review of Morton Effect: From Theory to Industrial Practice |
3 |
| The Effect of Different Temperatures on Friction and Wear Properties of CFRPEEK against AISI 431 Steel under Water Lubrication |
3 |
| The Importance of Temperature in Generating ZDDP Tribofilms Efficient at Preventing Hydrogen Permeation in Rolling Contacts |
3 |
| Tribological Behavior and Microstructure of Carbon Fiber-Reinforced Polymer against Ti6Al4V Alloy in Fretting Contact |
3 |
| Effect of Temperature and Relative Humidity on Friction and Wear Properties of Silicone-Based Magnetorheological Elastomer |
3 |
| Vacuum Tribological Properties of Titanium Enhanced via Ultrasonic Surface Rolling Processing Pretreatment and Plasma Nitriding |
3 |
| Finite Element Modeling and Experimental Validation of Fretting Wear Scars in a Press-Fitted Shaft with an Open Zone |
3 |
| A Study of the Static/Kinetic Friction Behavior of PTFE-Based Fabric Composites |
3 |
| A Model for the Assessment of Wheel-Rail Contact in the Presence of Solid Contaminants |
3 |
| Enhancing the Tribological Behavior of Lubricating Oil by Adding TiO Graphene, and TiO2/Graphene Nanoparticles |
3 |
| Tribological Behavior of PTFE Composites Filled with PEEK and Nano-Al2O3 |
3 |
| Mechanical and Tribological Properties of Ca/P-Doped Titanium Dioxide Layer Produced by Plasma Electrolytic Oxidation: Effects of Applied Voltage and Heat Treatment |
3 |
| Friction and Temperature Reduction in a Mechanical Face Seal by a Surface Texturing: Comparison between TEHD Simulations and Experiments |
3 |
| High-Temperature Tribological Behavior of Al-20Si-5Fe-2Ni/ZrB2 Composites |
3 |
| Influence of Five-Year Degradation on Mechanical and Tribology Properties of Ultra-High-Molecular-Weight Polyethylene |
2 |
| Research on Effects of Groove Shape Optimization on Cavitation and Lubricating Characteristics for Microgroove Rotary Seal |
2 |
