| The sliding wear behaviour of CoCrFeMnNi and AlxCoCrFeNi high entropy alloys at elevated temperatures |
48 |
| Slurry erosion of steel - Review of tests, mechanisms and materials |
28 |
| Effect of solution treatment on cavitation erosion behavior of high-nitrogen austenitic stainless steel |
20 |
| Dry rolling/sliding wear behaviour of pearlitic rail and newly developed carbide-free bainitic rail steels |
19 |
| Wear anisotropy of selective laser melted 316L stainless steel |
19 |
| Two-body abrasion resistance of high-carbon high-silicon steel: Metastable austenite vs nanostructured bainite |
16 |
| Influence of various cashew friction dusts on the fade and recovery characteristics of non-asbestos copper free brake friction composites |
15 |
| The effect of retained austenite stability on impact-abrasion wear resistance in carbide-free bainitic steels |
15 |
| Effect of coating thickness on the tool wear performance of low stress TiAlN PVD coating during turning of compacted graphite iron (CGI) |
14 |
| Prediction of micropitting damage in gear teeth contacts considering the concurrent effects of surface fatigue and mild wear |
14 |
| Protocol for tool wear measurement in micro-milling |
14 |
| Dry sliding behavior and friction layer formation in copper-free barite containing friction materials |
14 |
| A preliminary investigation on the use of the pin-on-disc test to simulate off-brake friction and wear characteristics of friction materials |
14 |
| Microstructure evolution and tribological performance of Cu-WS2 self-lubricating composites |
14 |
| Effects of graphite nano-particle additions on dry sliding behaviour of plasma-electrolytic-oxidation-treated EV31A magnesium alloy against steel in air |
13 |
| Dry sliding friction and wear behaviour of TiC-based ceramics and consequent effect of the evolution of grain buckling on wear mechanism |
13 |
| Wear behavior of TiAlN coated WC tool during micro end milling of Ti-6Al-4V and analysis of surface roughness |
13 |
| Frictional behavior of resin-based brake composites: Effect of carbon fibre reinforcement |
12 |
| Wear phenomena and tribofilm formation of copper/copper-graphite sliding electrical contact materials |
12 |
| Friction and wear performance of olive oil containing nanoparticles in boundary and mixed lubrication regimes |
12 |
| Prediction of wheel and rail wear under different contact conditions using artificial neural networks |
12 |
| Wear behavior of boron-carbide reinforced aluminum surface composites fabricated by Friction Stir Processing |
12 |
| Effect of desert sand on wear and rolling contact fatigue behaviour of various railway wheel steels |
12 |
| Wear behaviour of CVD diamond-coated tools in the drilling of woven CFRP composites |
11 |
| A concept for reducing PM10 emissions for car brakes by 50% |
11 |
| Three-body abrasive wear of carbide-free bainite, martensite and bainite-martensite structure of similar hardness |
11 |
| Controlled hydrodynamic cavitation erosion with abrasive particles for internal surface modification of additive manufactured components |
11 |
| A novel real-world braking cycle for studying brake wear particle emissions |
11 |
| Effects of protic ionic liquid crystal additives on the water-lubricated sliding wear and friction of sapphire against stainless steel |
11 |
| Tribological performance of graphite-filled polyimide and PTFE composites in oil-lubricated three-body abrasive conditions |
11 |
| Tribological performance of titanium nitride coatings: A comparative study on TiN-coated stainless steel and titanium alloy |
11 |
| Tribological behavior of nanosecond-laser surface textured Ti6Al4V |
11 |
| Influence of cobalt content and HVOF deposition process on the cavitation erosion resistance of WC-Co coatings |
11 |
| A study of formation of high order wheel polygonalization |
11 |
| High speed observation of damage created by a collapse of a single cavitation bubble |
11 |
| Limiting conditions for application of PVD (TiAlN) and CVD (TiCN/Al2O3/TiN) coated cemented carbide grades in the turning of hardened steels |
11 |
| Slurry erosion, sliding wear and corrosion behavior of martensitic stainless steel composites reinforced in-situ with NbC particles |
10 |
| Numerical prediction of cavitation erosion on a ship propeller in model- and full-scale |
10 |
| Investigation of the influence of rail hardness on the wear of rail and wheel materials under dry conditions (ICRI wear mapping project) |
10 |
| Self-lubricating laser claddings for reducing friction and wear from room temperature to 600 degrees C |
10 |
| Influence of additives on the friction and wear reduction of oil-based drilling fluid |
10 |
| On the influence of car brake system parameters on particulate matter emissions |
10 |
| On the generation of enhanced lookup tables for wheel-rail contact models |
10 |
| The role of retained austenite in dry rolling/sliding wear of nanostructured carbide-free bainitic steels |
10 |
| Diprotic ammonium palmitate ionic liquid crystal and nanodiamonds in aqueous lubrication. Film thickness and influence of sliding speed |
10 |
| Wear behavior of silica and alumina-based nanocomposites reinforced with multi walled carbon nanotubes and graphene nanoplatelets |
10 |
| High-temperature sliding wear behaviour of Stellite (R) 12 and Tribaloy (R) T400 |
10 |
| Study on the mechanism for the wheel polygonal wear of high-speed trains in terms of the frictional self-excited vibration theory |
10 |
| A study on novel AISI 304 stainless steel matrix composites reinforced with (Nb-0.Ti-0.25)C |
10 |
| Effect of TiC particles on three-body abrasive wear behaviour of low alloy abrasion-resistant steel |
10 |
