| Undercut Formation Mechanism in Keyhole Plasma Arc Welding |
7 |
| Bubble Evolution in Ultrasonic Wave-Assisted Underwater Wet FCAW |
6 |
| Effects of Electrode Surface Topography on Aluminum Resistance Spot Welding |
5 |
| Weldability of Duplex Stainless Steels - Thermal Cycle and Nitrogen Effects Duplex stainless steel weld microstructures were investigated as a function of weld thermal cycles and shielding gas nitrogen content |
5 |
| EBW and LBW of Additive Manufactured Ti6AI4V Products |
5 |
| Physical Phenomena in the Weld Zone of Submerged Arc Welding - A Review |
4 |
| Effect of Silicon and Retained Austenite on the Liquid Metal Embrittlement Cracking Behavior of GEN3 and High-Strength Automotive Steels |
4 |
| Toward Process-Based Quality through a Fundamental Understanding of Weld Microstructural Evolution |
4 |
| Fiber Laser Welding of 1700-MPa, Ultrahigh-Strength Steel |
4 |
| Microstructure Evolution and Solidification Cracking in Austenitic Stainless Steel Welds |
4 |
| Cold Wire Gas Metal Arc Welding: Droplet Transfer and Geometry |
3 |
| Dynamic Reflection Behaviors of Weld Pool Surface in Pulsed GTAW |
3 |
| Arc Formation in Narrow Gap Hot Wire Laser Welding |
3 |
| Single-Sided Ultrasonic Welding of CF/Nylon 6 Composite without Energy Directors |
3 |
| Spot Weld Strength Modeling and Processing Maps for Hot-Stamping Steels |
2 |
| Online Inspection of Weld Quality in Ultrasonic Welding of Carbon Fiber/Polyamide 66 without Energy Directors |
2 |
| Root Pass Microstructure in Super Duplex Stainless Steel Multipass Welds |
2 |
| In-Situ Monitoring of Transient Strain Formation in Vertical Welds Even in a short weld, compressive transversal strains in front of the weld pool gradually increase as the weld pool moves up the plate |
2 |
| Optimizing Ultrasonic Plus Resistance Spot Welding for Dissimilar Metal Joining Insert material and welding parameters were optimized for reduced intermetallic thickness and improved mechanical properties of aluminum to steel joints |
2 |
| Exploring the Cooling Process for Residual Stress Reduction in Dissimilar Welds |
2 |
| Laser Wire Deposition of a Large Ti-6Al-4V Space Component |
2 |
| Bake-Strengthening of Resistance Spot Welded Aluminum Alloy 6061 |
2 |
| Corrosion Behaviors of CMT Spot-Joined AA6022-T4 to Galvanized DC03 |
2 |
| Weld Pool Surface Fluctuations Sensing in Pulsed GMAW |
1 |
| Rotating-Tungsten Narrow-Groove GTAW for Thick Plates |
1 |
| Weld Processing and Mechanical Responses of 1-GPa TRIP Steel Resistance Spot Welds The size and geometry of the fusion zone was the most important factor affecting the mechanical performance of the welds |
1 |
| Influence of Fluid Flow on Humping Bead during High-Speed GMAW |
1 |
| Influence of Horn Misalignment on Weld Quality in Ultrasonic Welding of Carbon Fiber/Polyamide 66 Composite |
1 |
| Welding Technology Development for an Erosion-Resistant Slurry Pipeline Steel |
1 |
| Hot Wire-Assisted Gas Metal Arc Welding of Ni-Based Hardfacing |
1 |
| Measurement of Calibrated Recursive Analytic in the Gas Tungsten Arc Weld Pool Model |
1 |
| Arc Behavior and Droplet Dynamics of AC GTAW-GMAW Hybrid Indirect Arc |
1 |
| Solidification Cracking Mechanism of Carbon Steel Weld Metal |
1 |
| Laser-Enhanced Short-Circuiting Metal Transfer in GMAW |
1 |
| Dynamic Behavior of Solder Filling during Ultrasonic Soldering |
1 |
| Austenitic Stainless Steel Cladding Interface Microstructures Evaluated for Petrochemical Applications |
1 |
| High-Speed Tandem Pulsed GTAW of Thin Stainless Steel Plate |
1 |
| Laser Heat Treatment of Low-Alloy Ultrahigh-Strength Steel Laser-Welded Joints |
0 |
| Development of Nickel-Added, Iron-Based, Slag-Free, Self-Shielded Metal-Cored Wire The effects of nickel on the microstructure and wear performance of hardfacing alloys are investigated |
0 |
| Influence of Multiple Gleeble (R)-Simulated Weld Thermal Cycles on Maraging 17-4 and 13-8+Mo A preliminary investigation to determine whether controlled weld metal deposition procedures are feasible for Maraging Stainless Steels 17-4 and 13-8+Mo |
0 |
| Assessment of Thermoplastic Weldability Using the Deformation Technique |
0 |
| Joining Alumina to the TZM Alloy by Hot Pressing |
0 |
| Stress Relief Cracking Susceptibility in High-Temperature Alloys |
0 |
| Local Structural Changes during Martensite Decomposition in Cr-Mo Steel Dissimilar Weldments |
0 |
| Interface Reactions Responsible for Run-Out in Active Brazing: Part 2 |
0 |
| Interface Reactions Responsible for Run-Out in Active Brazing: Part 1 |
0 |
| Duplex Stainless Steel/Martensitic Steel Dissimilar Resistance Spot Welding: Microstructure-Properties Relationships The correlations among process-structure-mechanical properties of the similar and dissimilar combination of duplex stainless steel and advanced high-strength martensitic steel are analyzed |
0 |
| Characterization of P92 Steel Weldments in As-Welded and PWHT Conditions Room-temperature tensile tests and microhardness measurements led to improving the ductility of the weld joints |
0 |
| The Aging Effects of Aluminum Magnesium Alloy Welding Wires |
0 |
| 3D Weld Pool Surface Geometry Measurement with Adaptive Passive Vision Images |
0 |
