| Composite Sulfur Electrode for All-solid-state Lithium-sulfur Battery with Li2S-GeS2-P2S5-based Thio-LISICON Solid Electrolyte |
9 |
| Protein-Engineering Improvement of Direct Electron Transfer-Type Bioelectrocatalytic Properties of D-Fructose Dehydrogenase |
6 |
| Sublayered Structures of Hydrated Nafion (R) Thin Film Formed by Casting on Pt Substrate Analyzed by X-ray Absorption Spectroscopy under Ambient Conditions and Neutron Reflectometry at Temperature of 80 degrees C and Relative Humidity of 30-80% |
6 |
| The Utilization of Boron-doped Diamond Electrodes for the Electrochemical Reduction of CO2: Toward the Production Compounds with a High Number of Carbon Atoms |
5 |
| Highly Safe 100-Wh-class Lithium-ion Battery Using Lithium Bis(trifluoromethanesulfonyl)amide-Tetraethylene Glycol Dimethyl Ether Equimolar Complex-based Quasi-solid-state Electrolyte |
5 |
| Reduction of CaTiO3 by Electrolysis in the Molten Salt CaCl2-CaO |
5 |
| Electrochemical Behavior of Ti(III) Ions in a KF-KCl Eutectic Melt |
5 |
| Electrochemical Properties of All-solid-state Lithium Batteries with Amorphous FeSx-based Composite Positive Electrodes Prepared via Mechanochemistry |
4 |
| Synthesis, Crystal Structure and Electrode Properties of Spinel-Type MgCo2-xMnxO4 |
4 |
| A Novel Strategy to Improve the Electrochemical Performance of a Prussian Blue Analogue Electrode for Calcium-Ion Batteries |
4 |
| Development of Enzymatic Sensors Based on Extended-gate-type Organic Field-effect Transistors |
4 |
| Electrochemical Oscillations during Electro-oxidation of Copper Anode in Phosphoric Acid Solution |
4 |
| Effects of Sulfur Loading, Cathode Porosity, and Electrolyte Amount on Li-S Battery Performance with Solvate Ionic Liquid Electrolyte |
4 |
| Graphene Nanoplatelet-Polysulfone Composite Cathodes for High-Power Aluminum Rechargeable Batteries |
4 |
| Systematic Study on Materials for Lithium Sodium and Potassium-Ion Batteries |
4 |
| Synthesis, Electrochemical Properties and Changes of Crystal and Electronic Structures in Charge/Discharge Process of Spinel Type Cathode-Materials Mg(Mg0.5V1.5-xNix)O-4 (x= 0. 0.2 1 0.3) for Magnesium Secondary Batteries |
4 |
| Surface State Change of Lithium Metal Anode in Full Cell during Long Term cycles |
3 |
| Potassiation and Depotassioation Properties of Sn4P3 Electrode in an Ionic-Liquid Electrolyte |
3 |
| Redox Active Glyme-Li Salt Solvate Ionic Liquids Based on Tetrabromoferrate(III) |
3 |
| Structural Analysis of NaCuO2 Cathode at Various Charged/Discharged Stages and Its Reaction Mechanism |
3 |
| Dependence of the Reverse Current on the Surface of Electrode Placed on a Bipolar Plate in an Alkaline Water Electrolyzer |
3 |
| Unique Metal Fog Generation in LiCl-KCl Melt |
2 |
| Mechanism of the Na-substituted Spinel Phase Generation in a Li4Ti5O12 Electrode via Sodium-ion Battery Cycling |
2 |
| Simultaneous Electrochemical Determination of Isoquercitrin and Epigallocatechingallate at a Carbon Nanotube Electrode |
2 |
| Investigation of Carbon-coating Effect on the Electrochemical Performance of LiCoPO4 Single Particle |
2 |
| Electrodeposition of Cadmium from Lewis Basic Hydrophobic Room-temperature Ionic Liquid |
2 |
| Electrodeposition of Tin in an Amide Type Ionic Liquid Containing Chloride Ion |
2 |
| Metastable Materials for All-Solid-State Batteries |
2 |
| Novel Molten Salt Electrochemical Processes for Industrial Applications |
2 |
| Static Capacitance at the Electrochemical Liquid-liquid Interface Between Ionic Liquids and Eutectic Ga-In Alloy Measured Using the Pendant Drop Method |
2 |
| Electrochemical Formation of Selenium Nanoparticle in an Amide-type Ionic Liquid |
2 |
| Purity and Minority Carrier Lifetime in Silicon Produced by Direct Electrolytic Reduction of SiO2 in Molten CaCl2 |
2 |
| Fundamentals and Applications of Redox Enzyme-functionalized Electrode Reactions |
2 |
| Studies of Electrocatalyst and Metallic Bipolar Plate for Polymer Electrolyte Fuel Cell |
2 |
| Calculation of Oxygen Potential Profile in Proton-Hole Mix Conductive Electrolyte and its Application for Evaluation of Practical Cells |
2 |
| Measurement of Side-Reaction Currents on Electrodes of Lithium-Ion Cells Using a Battery Cycler with a High-Precision Current Source |
2 |
| Synthesis of Carbon Nanotube/Graphene Composites on Ni Foam without Additional Catalysts by CVD and their Nitrogen-Plasma Treatment for Anode Materials in Lithium-ion Batteries |
2 |
| Sequential Injection Analysis of Anionic Surfactants Using On-line Preconcentration Technique and a Microfluidic Polymer Chip with an Embedded Ion-Selective Electrode as a Detector |
2 |
| Operando Soft X-ray Absorption Spectroscopic Study of an All-solid-state Lithium-ion Battery Using a NASICON-type Lithium Conductive Glass Ceramic Sheet |
2 |
| Electrochemical Impedance Analysis of Corrosion of Reinforcing Bars in Concrete |
2 |
| Mechanochemical Synthesis of Na-Sb Alloy Negative Electrodes and Their Application to All-solid-state Sodium Batteries |
1 |
| Influence of Degree of Substitution of Carboxymethyl Cellulose on High Performance Silicon Anode in Lithium-Ion Batteries |
1 |
| Effect of Mechanical Attrition on Structure and Property of Electroplated Ni-P Coating on Magnesium Alloy |
1 |
| Fabrication and Characterization of a Fully Screen-Printed Ag/AgCl Reference Electrode Using Silica Gel Inks Exhibiting Instantaneous Usability and Long-Term Stability |
1 |
| Directional Electron Transfer from Ubiquinone-10 to Cytochrome c at a Biomimetic Self-Assembled Monolayer Modified Electrode |
1 |
| Optimizing Micrometer-Sized Sn Powder Composite Electrodes for Sodium-Ion Batteries |
1 |
| Electrochemical Behavior and Specific Adsorption of an Iodide-based Ionic Liquid on Au(111) |
1 |
| Electrochemical Reduction of Carbon Dioxide to Formate on Palladium-Copper Alloy Nanoparticulate Electrode |
1 |
| Capacitance of Activated Carbon with Ibuprofen Adsorption |
1 |
| Determination of Constant Phase Element Parameters under Cyclic Voltammetry Conditions Using a Semi-theoretical Equation |
1 |
