| Influence of molecular structure on the foamability of polypropylene: Linear and extensional rheological fingerprint |
12 |
| Evaluation of polypropylene/clay nanocomposite foamability based on their morphological and rheological aspects |
12 |
| Compression of polystyrene and polypropylene foams for energy absorption applications: A combined mechanical and microstructural study |
9 |
| Production and characterization of epoxy syntactic foams highly loaded with thermoplastic microballoons |
7 |
| Improved compression properties of polypropylene extrusion foams by supramolecular additives |
6 |
| Thermal expansion and dynamic mechanical analysis of epoxy matrix-borosilicate glass hollow particle syntactic foams |
6 |
| Effect of polymer foam anisotropy on energy absorption during combined shear-compression loading |
6 |
| Morphological, thermo-mechanical, and thermal conductivity properties of halloysite nanotube-filled polypropylene nanocomposite foam |
5 |
| Thermo-electrical behaviour of cyclic olefin copolymer/exfoliated graphite nanoplatelets nanocomposites foamed through supercritical carbon dioxide |
5 |
| Microcellular thermoplastic polyurethanes and their flexible properties prepared by mold foaming process with supercritical CO2 |
5 |
| Cell morphologies and mechanical properties of cellulose nanofiber reinforced polypropylene foams |
5 |
| Foam extrusion of polypropylene-rice husk composites using CO2 as the blowing agent |
5 |
| Energy-absorbing performance of graded Voronoi foams |
5 |
| Effect of unrefined crude glycerol composition on the properties of polyurethane foams |
4 |
| Synergistic effects of intumescent flame retardant and nano-CaCO3 on foamability and flame-retardant property of polypropylene composites foams |
4 |
| Morphological, mechanical, and thermal properties of injection molded polylactic acid foams/composites based on wood flour |
4 |
| Mixed matrix membranes based on silica nanoparticles and microcellular polymers for CO2/CH4 separation |
4 |
| Interconnected porous poly(-caprolactone) tissue engineering scaffolds fabricated by microcellular injection molding |
4 |
| Development and characterisation of poly-L-lactide-based foams fabricated through microwave-assisted compression moulding |
4 |
| Improved expansion ratio and heat resistance of microcellular poly(L-lactide) foam via in-situ formation of stereocomplex crystallites |
4 |
| Compatibility, morphology and mechanical properties of polylactic acid/polyolefin elastomer foams |
3 |
| Effect of different concentration of rapeseed oil and recycled poly (ethylene terephthalate) in polyols for rigid polyurethane foams |
3 |
| Improvement of foamed part surface quality with variothermal temperature control and analysis of the mechanical properties |
3 |
| Preparation of open microcellular polylactic acid foams with a microfibrillar additive using coreback foam injection molding processes |
3 |
| Morphology control of extruded polystyrene foams with benzene-trisamide-based nucleating agents |
3 |
| Poly(lactic acid) foams reinforced with cellulose micro and nanofibers and foamed by chemical blowing agents |
3 |
| A study on the fabrication of plasticized polystyrene-carbon nanotube nanocomposites for foaming |
2 |
| Monitoring deformation mechanism of foam cells in polyethylene foams via optical microscopy: Effect of density and microstructure |
2 |
| Effect of propylene glycol, rapeseed glycerine, and corn starch modified polyol blends parameters on the properties of thermal insulating polyurethane foams |
2 |
| Morphology and properties of thin-walled microcellular polycarbonate/acrylonitrile-butadiene-styrene blend foam |
2 |
| Measurement of the Young's modulus and shear modulus of extruded polystyrene foam by the longitudinal and flexural vibration methods |
2 |
| Microcellular foaming by using subcritical CO2 of crosslinked and non-crosslinked LDPE/clay nanocomposites |
2 |
| Expansion characteristics of expandable styrene/methyl methacrylate copolymer particles: The effects of copolymer molecular weight and particle size |
2 |
| Preparation of fluorescent thermoplastic polyurethane microcellular foam films blown by supercritical CO2 |
2 |
| Random equilateral Kelvin open-cell foam microstructures: Cross-section shapes, compressive behavior, and isotropic characteristics |
2 |
| Mechanical anisotropy of PS/CO2 microcellular foam sheet prepared by foaming extrusion |
2 |
| The deterioration of foamed silicone rubber in humid and hot environments |
2 |
| Synthesis and cryogenic mechanical properties of CO2-blown carbon-reinforced polyurethane foam |
2 |
| Consequence of cenosphere loading on hygrothermal, thermal, and mechanical properties of epoxy syntactic foams |
1 |
| New, thermally stable, rigid polyurethane foams based on polyols obtained using morpholine-3-dione derivatives |
1 |
| Study on buffering characteristics of expanded polyvinyl alcohol influenced by temperature and humidity |
1 |
| Cell characteristics of epoxy resin foamed by step temperature-rising process using supercritical carbon dioxide as blowing agent |
1 |
| Improving the extensional rheological properties and foamability of high-density polyethylene by means of chemical crosslinking |
1 |
| Acoustic performances of silicone foams for sound absorption |
1 |
| Foaming and thermal characteristics of bio-based polylactic acid-thermoplastic polyurethane blends |
1 |
| Fabrication and characterization of polymeric cellular foams for low-density computed tomography phantom applications |
1 |
| Thermally insulating extruded foams laminated with barrier films |
1 |
| In-plane shear modulus of extruded polystyrene foam measured by the torsional vibration, square-plate twist and simple shear methods |
1 |
| New trends in cellular silicone: Innovations and applications |
0 |
| Thermally resistant polyurethane foams with reduced flammability |
0 |
