| Removal of Methyl Orange from Aqueous Solution by Adsorption onto a Hydrogel Composite |
9 |
| Mechanical behavior simulation: NCF/epoxy composite processed by RTM |
7 |
| Mechanical Property of Multiwall Carbon Nanotube Reinforced Polymer Composites |
7 |
| Morphology and mechanical properties of maple reinforced LLDPE produced by rotational moulding: Effect of fibre content and surface treatment |
7 |
| Impact of co-mixing technique and surface modification of ZnO nanoparticles using stearic acid on their dispersion into HDPE to produce HDPE/ZnO nanocomposites |
7 |
| Effect of surface treatment and stacking sequence on mechanical properties of basalt/glass epoxy composites |
6 |
| Mechanical and thermal behaviour of food waste (Citrus limetta peel) fillers-based novel epoxy composites |
6 |
| Experimental determination and modelling of the mechanical properties of hybrid abaca-reinforced polymer composite using RSM |
6 |
| Investigations on short coir fibre-reinforced composites via full factorial design |
6 |
| Mechanical, electrical, and electromagnetic properties of hybrid graphene/glass fiber/epoxy composite |
5 |
| Effect of low nanoclay content on the physico-mechanical properties of poly(lactic acid) nanocomposites |
4 |
| Chitosan-based hydrogels prepared by UV polymerization for wound dressing |
4 |
| Effect of hard segments content on the properties, structure and biodegradation of nonisocyanate polyurethane |
4 |
| Hybrid Pu/Synthetic Talc/Organic Clay Ternary Nanocomposites: Thermal, Mechanical and Morphological Properties |
4 |
| Rain erosion-resistant coatings for wind turbine blades: A review |
4 |
| The Effect of Flocculent, Dispersants, and Binder on Wet-laid Process for Recycled Glass Fiber/PA6 Composite |
4 |
| Polypyrrole-Fe2O3 Nanocomposites with High Dielectric Constant: In Situ Chemical Polymerisation |
3 |
| Accelerated Ageing of Alkali Treated Olive Husk Flour Reinforced Polylactic Acid (PLA) Biocomposites: Physico-Mechanical Properties |
3 |
| Dielectric studies and AC conductivity of piezoelectric barium titanate ceramic polymer composites |
3 |
| Preparing chitosan-polyaniline nanocomposite film and examining its mechanical, electrical, and antimicrobial properties |
3 |
| Mechanical properties of jute fiber-reinforced UP/PU hybrid network composites |
3 |
| New chitin derivatives and their Schottky diodes: Synthesis and characterization |
3 |
| Mechanical performance of hybrid woven jute-roselle-reinforced polyester composites |
3 |
| Design of Radar Absorbing Structures Utilizing Carbon-Based Polymer Composites |
3 |
| Nanomechanical properties, surface topography, and color stability of fiber-reinforced composite orthodontic retainers |
2 |
| Enhancement Mechanism for Darbohydrate Polymer Green Lubricant |
2 |
| Mechanical Properties of Glass Bead-Modified Polymer Composite |
2 |
| Characterization and Properties of Graphene Nanoplatelets/XNBR Nanocomposites |
2 |
| The effects of sample preparation on the interlaminar shear strength test values of unidirectional carbon fiber-reinforced epoxy composites |
2 |
| Blending and plasticising effects on the behaviour of poly(lactic acid)/poly(epsilon-caprolactone) |
2 |
| Preparation and characterization of poly(lactic acid) with adipate ester added as a plasticizer |
2 |
| The effects of a compatibiliser on processing, tensile properties and morphology of polystyrene (PS)/styrene-butadiene rubber (SBR)/ wollastonite composites |
2 |
| Mechanical Properties and Failure Analysis of Short Kenaf Fibre Reinforced Composites Processed by Resin Casting and Vacuum Infusion Methods |
2 |
| Thermal and rheological properties of polyamide 6/layered double hydroxide clay composites |
2 |
| Thermal stability of phosphorus-containing epoxy resins by thermogravimetric analysis |
2 |
| Preparation and studies of pigeon pea stalk/polypropylene composites with and without compatibilizer |
2 |
| Antibacterial wood-plastic composite produced from treated and natural dyed wood fibers |
2 |
| Optimization of laminated composite plates subjected to nonuniform thermal loads |
2 |
| Evaluation of Short-term Creep Behavior of PE-HD After Aging in Oil Derivatives |
1 |
| Polymer Composites with Enhanced Thermal Conductivity and Mechanical Properties for Geothermal Heat Pump Pipes |
1 |
| Global Sensitivity Analysis for the Elastic Properties of Unidirectional Carbon Fibre Reinforced Composites Based on Metamodels |
1 |
| Effects of curing time and de-molding temperature on the deformation of glass fiber/epoxy resin prepreg laminates fabricated by rapid hot press |
1 |
| Experimental investigation of anisotropic viscoelastic properties of glass fiber-reinforced polymeric composite material |
1 |
| Experimental investigation of double-lap bolted composite joints with different outer plates subjected to bending loads |
1 |
| Study of electrical properties of a reduced graphene-oxadiazole-2-thiol (rGS) PVA polymer composite |
1 |
| Effects of micrometre-sized graphite flake to reinforce the performances of poly(lactic acid) thermoplastic biocomposites |
1 |
| Structure and properties evaluation of epoxy resin modified with polyurethane based on polymeric MDI and different polyols |
1 |
| Fluoro-functionalized graphene oxide/polyaniline composite electrode material for supercapacitors |
1 |
| Effects of nano- and micro-sized inorganic filers on the performance of epoxy hybrid nanocoatings |
1 |
| Design and Simulation Analysis of Lightweight HDPE Milk Bottle |
1 |
