| New Insights on the Compatibility of Nitrocellulose with Aniline-Based Compounds |
18 |
| Modeling The Effects of Shock Pressure and Pore Morphology on Hot Spot Mechanisms in HMX |
16 |
| Engineering of Al/CuO Reactive Multilayer Thin Films for Tunable Initiation and Actuation |
13 |
| Nitrocellulose Synthesis from Miscanthus Cellulose |
9 |
| Synthesis and Characterization of New PGN Based Reactive Oligomeric Plasticizers for Glycidyl Azide Polymer |
8 |
| Application and Properties of Nano-sized RDX in CMDB Propellant with Low Solid Content |
7 |
| Nanothermites: A short Review. Factsheet for Experimenters, Present and Future Challenges |
6 |
| Explosive Properties of a High Explosive Composition Based on Cis-6-tetranitrooctahydroimidazo-[5-d]imidazole and 1-Diamino-2-dinitroethene (BCHMX/FOX-7) |
6 |
| Pressure-dependent Elastic Coefficients of -HMX from Molecular Simulations |
6 |
| Fabrication of Ultra-Fine TATB/HMX Cocrystal Using a Compound Solvent |
6 |
| The Detonation Properties Research on TKX-50 in High Explosives |
6 |
| Studying Crosslinker Chemical Structure Effect on the Tuning Properties of HTPB-Based Polyurethane |
5 |
| Synthetic Studies of 6-Diamino-5-Dinitropyrazine-1-Oxide (LLM-105) from Discovery to Multi-Kilogram Scale |
5 |
| Applying Mechanically Activated Al/PTFE in CMDB Propellant |
5 |
| Analysis of Residual Explosives by Swab Touch Spray Ionization Mass Spectrometry |
5 |
| Laser Ignition of a Low Vulnerability Propellant Based on Nitrocellulose: Effects of Ar and N-2 Surrounding Atmospheres |
5 |
| Effects of Fluoropolymer Binders on the Mechanical Properties of TATB-Based PBX |
5 |
| Size-dependent Effect on Thermal Decomposition and Hazard Assessment of TKX-50 under Adiabatic Condition |
5 |
| Research on Tensile Mechanical Properties and Damage Mechanism of Composite Solid Propellants |
5 |
| Thermal and Rheological Properties of PGN, PNIMMO and P(GN/NIMMO) Synthesized via Mesylate Precursors |
5 |
| Effects of Charge Size on Slow Cook-Off Characteristics of AP/HTPB Composite Propellant in Base Bleed Unit |
5 |
| High Catalytic Activity of Nitrogen-Doped Graphene on the Thermal Decomposition of CL-20 |
5 |
| Assessing the Detonation Performance of New Tetrazole Base High Energy Density materials |
4 |
| Micromechanical Investigation of Debonding Processes in Composite Solid Propellants |
4 |
| Direct Ink Writing of DNTF Based Composite with High Performance |
4 |
| Insensitive High Explosives: III. Nitroguanidine - Synthesis - Structure - Spectroscopy - Sensitiveness |
4 |
| How Energetic are cyclo-Pentazolates? |
4 |
| Influence of Carbon Nanofibers on Thermal and Mechanical Properties of NC-TEGDN-RDX Triple-Base Gun Propellants |
4 |
| Burning Characteristics of the HMX/CL-20/AP/Polyvinyltetrazole Binder/Al Solid Propellants Loaded with Nanometals |
4 |
| Aluminum Acceleration and Reaction Characteristics for Aluminized CL-20-Based Mixed Explosives |
4 |
| In situ Synthesized Energetic Salts Based on the C-N Fused Tricyclic 9-Diamine-7-Dihydro-Bis(triazolo)-Tetrazepine Cation: A Family of High-Performance Energetic Materials |
4 |
| Laboratory-scale Investigation of the Influence of Ageing on the Performance and Sensitivity of an Explosive Containing E-CL-20 |
4 |
| Synthesis, Thermal Properties and Sensitivity of Ladder-Like Nitrocellulose Grafted by Polyethylene Glycol |
4 |
| Energetic Compounds Based on 4-Bis(4-nitramino-5-oxadiazol-3-yl)-5-furoxan (BNAFF) |
4 |
| Effects of Crystal Quality and Morphology on the Mechanical Performance of LLM-105 Based PBXs |
4 |
| Reactive Plasticizers Covalently Linked to Glycidyl Azide Polymer via Catalyst-Free Huisgen Azide-Alkyne Cycloaddition |
4 |
| Facile Fabrication of Nanoparticles Stacked 6-diamino-5-dinitropyrazine-1-oxide (LLM-105) Sub-microspheres via Electrospray Deposition |
4 |
| Detonation Performance Characterization of a Novel CL-20 Cocrystal Using Microwave Interferometry |
4 |
| A Review of Illuminating Pyrotechnics |
4 |
| Ignition Delays of Mixtures of the Non-Hypergolic Energetic Ionic Liquid Hydroxyethylhydrazinium Nitrate Blended with Unsymmetrical Dimethylhydrazine |
4 |
| Synthesis and Investigation of the New Derivatives of Poly (Epichlorohydrin) Containing Energetic Groups |
4 |
| Preparation and Evaluation of Effective Combustion Catalysts Based on Cu(I)/Pb(II) or Cu(II)/Bi(II) Nanocomposites Carried by Graphene Oxide (GO) |
4 |
| Making Progress Towards Green Propellants |
3 |
| Continuous-wave Laser Ignition of Non-solvent Ionic Liquids Based on High Energetic Salts with Carbon Additives |
3 |
| An Algorithm for Evaluation of Potential Hazards in Research and Development of New Energetic Materials in Terms of their Detonation and Ballistic Profiles |
3 |
| Synthesis of Long Chain Bonding Agent of CSRP and its Effect on Propellant Mechanical Properties |
3 |
| Copolymers based on GAP and 2-Epoxyhexane as Promising Prepolymers for Energetic Binder Systems |
3 |
| Effect of Sodium Alginate on the Morphology and Properties of High Energy Insensitive Explosive TKX-50 |
3 |
| X-ray Phase Contrast Imaging of the Impact of a Single HMX Particle in a Polymeric Matrix |
3 |
| A Safer Synthesis of 5-Bis(dinitromethyl)-4-triazole (BDT) and Its Mono and Di Salts: High-Performance Insensitive Energetic Materials |
3 |
