| Regeneration of rubber waste using an intelligent grinding system |
8 |
| Evaluation of emissivity and environmental safety of biomass grinders drive |
8 |
| Impact of the plastic bottle production on the natural environment. Part 1. Application of the ReCiPe 2016 assessment method to identify environmental problems |
6 |
| Impact of the plastic bottle production on the natural environment. Part 2. Analysis of data uncertainty in the assessment of the life cycle of plastic beverage bottles using the Monte Carlo technique |
5 |
| Environmental analysis of post-use management of car tires |
5 |
| Thermal properties of waste plastic in terms of their thermal management |
4 |
| Studies on water absorptivity and desorptivity of tannery shavings-based composites with mineral additives |
4 |
| Study on fuel oils used in ammonium nitrate-based explosives |
4 |
| Effect of fineness and increased humidity of carbonaceous fuels on the chemical composition of exhaust gases |
3 |
| Recovering biologically active compounds from logging residue of birch (Betula spp.) with supercritical carbon dioxide |
3 |
| The chemical mechanism of the HCI formation in the pyrolysis process of selected wastes |
3 |
| Modeling the spread of ammonia in atmospheric air around a poultry farm |
3 |
| Study on extraction of biologically active compounds from birch (Betula) buds with supercritical carbon dioxide |
3 |
| Study on biodegradation of drilling wastes contaminated with petroleum hydrocarbons |
3 |
| On relationship between infrared spectra of worn out engine oils and their kinematic viscosity |
3 |
| Application of circular economy model and cleaner technologies on the example of the Polish agro-food company Farmutil |
3 |
| Economic determinants of the reduction of benzo[a]pyrene emission in the Middle Odra region |
3 |
| Changes in volatile compounds of fermented mixed drink using commercial yeast strain |
3 |
| Evaluation of gasification of coal density fractions |
2 |
| Studies on oxidative cleavage of alpha-methylstyrene with oxygen in the presence of N-hydroxyphthalimide in alternative solvents |
2 |
| Isosteric heat of methane sorption on selected hard coals |
2 |
| Controlling in the management process of a chemical industry production company |
2 |
| Analysis of chlorine migration in low temperature pyrolysis |
2 |
| Impact of the beater shredder design on the granulometric composition of the shredded grain material |
2 |
| Surface and structural properties of titanium coating deposited onto AIN ceramics substrate by friction surfacing process |
2 |
| The possibility of using computer simulations to identify chemical hazards during thermal conversion of fuel from waste RDF |
2 |
| Effect of crusher type and its parameters on the dry granulation of powders |
2 |
| Adsorption and desorption of 2-cresol, 4-chloro-2-cresol and 2-methyl-4-chlorophenoxyacetic acid on activated carbons |
2 |
| Use of biochar and a zeolite as adsorbents of mineral pollutions |
2 |
| Synthesis, spectroscopy and biological activity of novel Cu(II) and Zn(II) complexes with 4-thiadiazole derivatives |
2 |
| Assessment of suitability of selected sorbents for removal of Co2+ ions from aqueous solutions |
2 |
| Use of iron and copper-promoted cenospheres as catalysts in the selective catalytic reduction of nitrogen(II) oxide with ammonia |
2 |
| Boron, cobalt, manganese and molybdenum compounds in the phosphate recovery from animal wastewater |
2 |
| Energetic usability and nuisance to the environment of selected fuels made of wastes |
2 |
| The use of plastic waste in biofilters for domestic sewage treatment |
2 |
| Methods of polyethylene and polypropylene waste recycling |
2 |
| Assessment of the financial condition of Polish chemical companies |
2 |
| Decision support in the selection of fluorescent penetrants for industrial non-destructive testing |
2 |
| Predicting variability of methane pressure with depth of coal seam |
2 |
| Benzo- and dibenzoderivatives of phenazine as dye photoinitiators of radical polymerization of trimethylolpropane triacrylate. The substituent effect in the photoredox pair |
2 |
| An analysis of the market of sourcing used oils from tractors in the aspect of the natural environment protection |
2 |
| Safety during chemical transport of dangerous goods |
2 |
| Evaluation of a possibility of producing fertilizers based on brown algae from anthropogenically transformed regions of the Black Sea |
2 |
| Thermochemical biomass conversion processes and their impact on the environment |
2 |
| Effect of addition of silver and copper on palladium catalysts activity in methane oxidation |
2 |
| Effect of supply water steam to combustion process of black coal on the chemical composition of exhaust gases |
2 |
| Use of organic aliphatic esters to obtain an energy-efficient eutectic mixture |
2 |
| Use of copolymers of vinyl acetate and alkyl acrylates for coating organic phase change materials |
2 |
| Production of synthetic particles of MoS2 using wet chemical synthesis |
2 |
| New membranes for industrial laundry wastewater treatment |
2 |
