| Biomedical applications of polyurethane materials and coatings |
16 |
| Modern developments in electrodes for electrochemical technology and the role of surface finishing |
10 |
| Effect of Nb addition on microstructure and properties of laser cladding NiCrBSi coatings |
5 |
| Electropolishing of nickel and cobalt in deep eutectic solvents |
5 |
| Electrodeposition of Pd from a deep eutectic solvent system: effect of additives and hydrodynamic conditions |
4 |
| Characterisations of low phosphorus electroless Ni and composite electroless Ni-P-SiC coatings on A356 aluminium alloy |
3 |
| Effects of pulse reverse electroforming parameters on the thickness uniformity of electroformed copper foil |
3 |
| Electrodeposited zinc composite coatings with embedded carbon nanotubes - advanced composite materials for better corrosion protection |
3 |
| Effect of water on the electrodeposition of copper on nickel in deep eutectic solvents |
3 |
| Effect of the plating parameters on the electrodeposition of Ni matrix coatings containing Ti nanoparticles |
3 |
| Comparisons of metal finishing sectors revisited: variations in some economic and structural factors |
2 |
| Corrosion behaviour of HVOF-sprayed Co-Cr-W-C coating in NaCl solution |
2 |
| Enhancement of mechanical and wear properties of tungsten carbide coated AA 6063 alloy using detonation gun technique |
2 |
| Effect of solution Zn concentration on electrodeposition of CuxZn1-x alloys: materials and resistivity characterisation |
2 |
| Temperature, current density and cobalt concentration effects on electrodeposited anticorrosive cobalt-tungsten alloys using factorial experiment design and ANOVA techniques |
2 |
| Development of pulse-plating technology for the preparation of coatings with varying composition along their thickness: a historical overview |
2 |
| A future application of pulse plating - silver recovery from hydrometallurgical bottom ash leachant |
2 |
| Effects of duty ratio on properties of micro-arc film on Ti-3Zr-2Sn-3Mo-25Nb |
2 |
| Sn-Cu codeposition from a non-aqueous solution based on ethylene glycol for wafer-bonding applications: direct and pulse electroplating |
2 |
| Effect of plasma surface tungstenising on the friction and wear of Ti2AlNb-based alloys |
2 |
| Study of silver electrodeposition in deep eutectic solvents using atomic force microscopy |
2 |
| TIG torch surfacing of metallic materials - a critical review |
2 |
| Theoretical study of hardness variation with pulse parameters in composite coatings electrodeposited by pulsed currents |
1 |
| Octylphenol ethoxylate surfactant as a suppressor in copper electrodeposition |
1 |
| Effect of current density on the corrosion protection performance of polyaniline coated AISI 4140 steel |
1 |
| Thermal treatment effect on structural and mechanical properties of Cr-C coatings |
1 |
| Study of microvia filling process based on multi-physical coupling |
1 |
| Prevention of nickel release from electroplated articles in the context of allergic contact dermatitis: further outcomes |
1 |
| Hierarchical structures of anodised cold gas sprayed titanium coatings |
1 |
| Dry sliding tribological behaviour of bilayer Cr/Cr coatings obtained in sulphate Cr(III) baths |
1 |
| Preparation and characterisation of diamond-like carbon films prepared by MW ECR/PACVD process deposited on 41Cr-Al-Mo7 nitrided steel |
1 |
| On the influence of different superficial laser texturing on the deposition of powders through cold spray process |
1 |
| Surface modification of atmospheric plasma sprayed cermet coatings by plasma transferred arc method |
1 |
| Electroplating onto aluminium and its alloys |
1 |
| Statistical approaches in surface finishing. Part 3. Design-of-experiments |
1 |
| Pretreatment on Ti substrate for Ti/Pt anode by electrolytic plasma processing |
1 |
| A brief review on bio-inspired superhydrophobic electrodeposited nickel coatings |
1 |
| Measuring business performance in the metal finishing industry by combining theory with practice |
1 |
| Copper-rich copper-zinc alloy coatings prepared by electrodeposition from glutamate complex electrolyte: current efficiency, Tafel kinetics and throwing power |
1 |
| Investigations on the corrosion behaviour and biocompatibility of magnesium alloy surface composites AZ91D-ZrO2 fabricated by friction stir processing |
1 |
| Electrodeposition of high corrosion resistant Ni-Sn-P alloy coatings from an ionic liquid based on choline chloride |
1 |
| Development of pore functionally graded Ti6Al4V scaffolds with biocompatible surface for bone repair |
1 |
| Laser texturing as an alternative to grit blasting for improved coating adhesion on AZ91D magnesium alloy |
1 |
| Electrodeposition of amorphous Ni-P layers, thermal treatment and corrosion behaviour |
1 |
| The combined effect of cryogenic and boronising treatments on the wear behaviour and microstructure of DIN 1.2344 steel |
1 |
| Effect of Er incorporation on structural and element distribution of Zr alloyed layers prepared using double glow plasma surface alloying |
1 |
| 'Nickel Allergy' arising from decorative nickel plated and alloyed articles: prevention at source |
1 |
| Offshoring and backshoring of surface finishing from the perspective of the Nordic countries |
1 |
| Electrodeposition of aluminium from ionic liquids on high strength steel |
1 |
| Electrodeposition and corrosion behaviour of nanocrystalline Fe-P coatings |
0 |
