| DEMO design activity in Europe: Progress and updates |
36 |
| An overview of the EU breeding blanket design strategy as an integral part of the DEMO design effort |
28 |
| Recent progress in developing a feasible and integrated conceptual design of the WCLL BB in EUROfusion project |
26 |
| High-fluence and high-flux performance characteristics of the superconducting Magnum-PSI linear plasma facility |
16 |
| Progress in the design of the superconducting magnets for the EU DEMO |
14 |
| Thermal properties of pure tungsten and its alloys for fusion applications |
13 |
| Conceptual design study for heat exhaust management in the ARC fusion pilot plant |
13 |
| An enhanced, near-term HCPB design as driver blanket for the EU DEMO |
13 |
| Evaluation of inter-granular corrosion susceptibility in 316LN austenitic stainless steel weldments |
12 |
| Overview over DEMO design integration challenges and their impact on component design concepts |
12 |
| Evaluation of helium effect on irradiation hardening in F82H, ODS, SIMP and T91 steels by nano-indentation method |
12 |
| Dust generation in tokamaks: Overview of beryllium and tungsten dust characterisation in JET with the ITER-like wall |
11 |
| Literature review of lead-lithium thermophysical properties |
10 |
| Fabrication of a thick copper-stainless steel clad plate for nuclear fusion equipment by explosive welding |
10 |
| Progress in EU Breeding Blanket design and integration |
10 |
| Design optimization of the ITER tungsten divertor vertical targets |
10 |
| Discrete element method for effective thermal conductivity of packed pebbles accounting for the Smoluchowski effect |
10 |
| Progress in the pre-conceptual CAD engineering of European DEMO divertor cassette |
9 |
| SPIDER in the roadmap of the ITER neutral beams |
9 |
| Wall protection strategies for DEMO plasma transients |
9 |
| Status of EU DEMO heat transport and power conversion systems |
9 |
| A review of impact properties of tungsten materials |
8 |
| Vacuum plasma spraying of functionally graded tungsten/EUROFER97 coatings for fusion applications |
8 |
| Understanding strain controlled low cycle fatigue response of P91 steel through experiment and cyclic plasticity modeling |
8 |
| Analysis of supercritical CO2 Brayton power cycles in nuclear and fusion energy |
8 |
| Overview of the fusion nuclear science facility, a credible break-in step on the path to fusion energy |
8 |
| Updated design of water-cooled breeder blanket for CFETR |
8 |
| Materials challenges for the fusion nuclear science facility |
7 |
| Development of water-cooled blanket concept with pressure tightness against in-box LOCA for JA DEMO |
7 |
| Advanced NBI beam characterization capabilities at the recently improved test facility BATMAN Upgrade |
7 |
| Thermal-hydraulic modeling and analyses of the water-cooled EU DEMO using RELAP5 system code |
7 |
| Development and qualification of functional materials for the European HCPB TBM |
7 |
| Overview of the DEMO conceptual design activity in Japan |
7 |
| Study on explosive welding for manufacturing meshing bonding interface of CuCrZr to 316L stainless steel |
7 |
| Deuterium retention in neutron-irradiated single-crystal tungsten |
7 |
| First-principles study the phase stability and mechanical properties of binary W-Mo alloys |
7 |
| Tensile and impact properties of tungsten-rhenium alloy for plasma-facing components in fusion reactor |
6 |
| Diagnostics for plasma control - From ITER to DEMO |
6 |
| Study of EU DEMO WCLL breeding blanket and primary heat transfer system integration |
6 |
| Thermo-hydraulic analysis of EU DEMO WCLL breeding blanket |
6 |
| Microstructure and properties of W-Cu/CuCrZr/316L joint bonded by one-step HIP technique |
6 |
| A study on assembly technology of the CFETR 1/32 Vacuum Vessel |
6 |
| Mechanochemical processing of Cu-Y2O3 alloy by MA-HIP for heat sink materials application |
6 |
| Improvement of impact properties of tungsten by potassium doping |
6 |
| First principles review of options for tritium breeder and neutron multiplier materials for breeding blankets in fusion reactors |
6 |
| Study of microstructure difference properties of electron beam welds with beam oscillation of 50 mm 316L in CFETR |
6 |
| Development of EUROFER97 database and material property handbook |
6 |
| Erosion and fuel retentions of various reduced-activation ferritic martensitic steel grades exposed to deuterium plasma |
6 |
| Experimental measurement and numerical modeling of the effective thermal conductivity of lithium meta-titanate pebble bed |
6 |
| Lithium isotope separation using displacement chromatography by cation exchange resin with high degree of cross-linkage |
6 |
