| Modeling the Monotonic and Cyclic Tensile Stress-Strain Behavior of 2D and 2.5D Woven C/SiC Ceramic-Matrix Composites |
13 |
| Critical Buckling Load of Chiral Double-Walled Carbon Nanotubes Embedded in an Elastic Medium |
11 |
| Effect of Thermomechanical Loading on an Edge Crack of Finite Length in an Infinite Orthotropic Strip |
10 |
| CRASHWORTHINESS EXPERIMENT AND SIMULATION ANALYSIS OF COMPOSITE THIN-WALLED CIRCULAR TUBES UNDER AXIAL CRUSHING |
8 |
| Assessing the Effects of Porosity on the Bending, Buckling, and Vibrations of Functionally Graded Beams Resting on an Elastic Foundation by Using a New Refined Quasi-3D Theory |
7 |
| Investigation of Two- and Three-Body Wear Resistance on Flowable Bulk-Fill and Resin-Based Composites |
6 |
| A Comparison of Closed-Form and Finite-Element Solutions for the Free Vibration of Hybrid Cross-Ply Laminated Plates |
5 |
| Relationships Between the Ultimate Strengths of Polymer Composites in Static Bending, Compression, and Tension |
5 |
| Elasticity Theory Solution of the Problem on Plane Bending of a Narrow Layered Cantilever Beam by Loads at Its Free End |
5 |
| CONSTRUCTING YIELD LOCI FOR RIGID-PLASTIC REINFORCED PLATES CONSIDERING THE 2D STRESS STATE IN FIBERS |
4 |
| NONLINEAR BUCKLING AND POSTBUCKLING OF FGM SHEAR-DEFORMABLE TRUNCATED CONICAL SHELLS REINFORCED BY FGM STIFFENERS |
4 |
| A UNIFIED APPROACH TO DETERMINING THE EFFECTIVE PHYSICOMECHANICAL CHARACTERISTICS OF FILLED POLYMER COMPOSITES BASED ON VARIATIONAL PRINCIPLES |
4 |
| Mechanical Behavior of a Unidirectional Basalt-Fiber-Reinforced Plastic Under Thermomechanical Loadings |
4 |
| Nonlinear Buckling and Postbuckling of a FGM Toroidal Shell Segment Under a Torsional Load in a Thermal Environment Within Reddy's Third-Order Shear Deformation Shell Theory |
4 |
| PHYSICAL-MECHANICAL PROPERTIES OF A FIBER-REINFORCED COMPOSITE BASED ON AN ELUR-P CARBON TAPE AND XT-118 BINDER |
4 |
| INVESTIGATION OF PROPERTIES OF NANOCOMPOSITE POLYIMIDE SAMPLES OBTAINED BY FUSED DEPOSITION MODELING |
4 |
| Dry Wear and Metallographic Study of PTFE Polymer Composites |
3 |
| EFFECT OF NONISOCYANATE POLYURETHANE AND NANOCLAY ON THE MECHANICAL PROPERTIES OF AN EPOXY RESIN |
3 |
| TOUGHENING EFFECT OF MICROSCALE PARTICLES ON THE TENSILE AND VIBRATION PROPERTIES OF S-GLASS-FIBER-REINFORCED EPOXY COMPOSITES |
3 |
| Numerical Analysis of a Masonry Panel Reinforced with Pultruded FRP Frames |
3 |
| Stability of Functionally Graded Circular Cylindrical Shells under Combined Loading |
2 |
| First-Ply-Failure Performance of Composite Clamped Spherical Shells |
2 |
| Electrical and Mechanical Properties of Melt-Processed Polyethylene Terephthalate/Multi-Wall Carbon Nanotube Nanocomposites for Thermoelectric Materials |
2 |
| Analysis of Properties of Ramp Stress Relaxation Curves Produced by the Rabotnov Nonlinear Hereditary Theory |
2 |
| LOW-TEMPERATURE LOCAL DISSIPATIVE PROCESSES IN POLYVINYL ALCOHOL |
2 |
| Fabrication, Experimental Modal Testing, and a Numerical Analysis of Composite Sandwich Structures with a Grid-Stiffened Core |
2 |
| Abrasion Resistance and Mechanical Properties of Waste-Glass-Fiber-Reinforced Roller-compacted Concrete |
2 |
| SYNTHESIS AND CHARACTERIZATION OF JUTE- AND CHICKEN-FEATHER-FIBER-REINFORCED POLYMER HYBRID COMPOSITES |
2 |
| ELASTICITY THEORY SOLUTION OF THE PROBLEM ON BENDING OF A NARROW MULTILAYER CANTILEVER WITH A CIRCULAR AXIS BY LOADS AT ITS END |
2 |
| STRUCTURE AND MECHANICAL PROPERTIES OF A DISPERSEDLY FILLED TRANSPARENT POLYCARBONATE |
2 |
| Mathematical Model for Diagnosing Strains by an Optical Fiber Sensor with a Distributed Bragg Grating According to the Solution of a Fredholm Integral Equation |
2 |
| Statistical Analysis of 3-Point Bending Properties of Polymer Concretes Made From Marble Powder Waste, Sand Grains, and Polyester Resin |
2 |
| Deformation Features and Models of [+/- 45](2s) Cross-Ply Fiber-Reinforced Plastics in Tension |
2 |
| Applicability Indicators and Identification Techniques for a Nonlinear Maxwell-Type Elastoviscoplastic Model Using Loading-Unloading Curves |
2 |
| DETERMINATION OF THE GLASS-TRANSITION TEMPERATURE OF GRPs AND CFRPs USING A TORSION PENDULUM IN REGIMES OF FREELY DAMPED VIBRATIONS AND QUASI-STASTIC TORSION OF SPECIMENS |
2 |
| EVALUATION OF CRITICALITY OF SELF-HEATING OF POLYMER COMPOSITES BY ESTIMATING THE HEAT DISSIPATION RATE |
2 |
| SYNTHESIS AND CHARACTERIZATION OF A POLYIMIDE-EPOXY COMPOSITE FOR DENTAL APPLICATIONS |
1 |
| Design of Pseudoductile Unidirectional Hybrid Composites Based on the Model of a Dry Bundle |
1 |
| Effect of Hole Machining Method on the Behavior of CFRP Laminates Under Low-Velocity Impacts |
1 |
| Tensile, Impact, and Thermal Properties of an Epoxynovolac Matrix Composites with Cuban Henequen Fibers |
1 |
| Diagram and Parameters of Fatigue Sensitivity for Evaluating the Residual Strength of Layered GFRP Composites After Preliminary Cyclic Loadings |
1 |
| Interfacial Strain Energy Continuity Assumption-Based Analysis of an Orthotropic-Skin Sandwich Plate Using a Refined Layer-by-Layer Theory |
1 |
| Enhancement of the Mechanical Properties of a Polylactic Acid/Flax Fiber Biocomposite by WPU, WPU/Starch, and TPS Polyurethanes Using Coupling Additives |
1 |
| Aeroelastic Stability of a Cylindrical Composite Shell at a Bilateral Flow |
1 |
| Characterization of Tensile and Compressive Properties of Basalt/Epoxy Composites Under Stress Corrossion Conditions |
1 |
| The Effect of Pigment Volume Concentration on Film Formation and the Mechanical Properties of Coatings Based on Water-Dispersion Paint and Varnish Materials |
1 |
| Mechanics of Unidirectional Fiber-Reinforced Composites: Buckling Modes and Failure Under Compression Along Fibers |
1 |
| Classification Model for Damage Localization in a Plate Structure |
1 |
| MESHLESS SOLUTION OF THE PROBLEM ON THE STATIC BEHAVIOR OF THIN AND THICK LAMINATED COMPOSITE BEAMS |
1 |
| DYNAMIC PROPERTIES OF SYMMETRIC AND ASYMMETRIC BEAMS MADE OF FUNCTIONALLY GRADED MATERIALS IN BENDING |
1 |
