| Strain and stress mapping by mechanochemical activation of spiropyran in poly(methyl methacrylate) |
10 |
| A general linear method to evaluate the hardening behaviour of metals at large strain with full-field measurements |
9 |
| Digital holographic interferometry for cultural heritage structural diagnostics: A coherent and a low-coherence optical set-up for the study of a marquetry sample |
6 |
| Comparison between 0D and 1D approaches for mechanical dissipation measurement during fatigue tests |
5 |
| Implementation of traction constraints in Bragg-edge neutron transmission strain tomography |
5 |
| Failure process and mechanism of sandstone under combined equal biaxial static compression and impact loading |
4 |
| Strain-induced crystallization in rubber: A new measurement technique |
4 |
| A reliable in vitro approach to assess the stability of acetabular implants using digital image correlation |
4 |
| DVC-based image subtraction to detect microcracking in lightweight concrete |
4 |
| Damage detection in a laboratory wind turbine blade using techniques of ultrasonic NDT and SHM |
4 |
| One-step deposition of nano-to-micron-scalable, high-quality digital image correlation patterns for high-strain in-situ multi-microscopy testing |
4 |
| High-throughput, high-accuracy determination of coefficient of thermal expansion of carbon fibre-epoxy composites using digital image correlation |
3 |
| An identification method of mechanical properties of materials based on the full-field measurement method based on the fringe pattern |
3 |
| The role of stress in controlling infrared radiation during coal and rock failures |
3 |
| Investigation of assumptions and approximations in the virtual fields method for a viscoplastic material model |
3 |
| On development of portable digital holographic speckle pattern interferometry system for remote-access monitoring and documentation in art conservation |
3 |
| Uncovering the hidden content of layered documents by means of photoacoustic imaging |
3 |
| On the identification of an effective cross section for a cruciform specimen |
3 |
| Investigating the static and dynamic tensile mechanical behaviour of polymer-bonded explosives |
2 |
| A specific device for enhanced measurement of mechanical dissipation in specimens subjected to long-term tensile tests in fatigue |
2 |
| Time-resolved identification of mechanical loadings on plates using the virtual fields method and deflectometry measurements |
2 |
| Evaluating the use of digital image correlation for strain measurement in historic tapestries using representative deformation fields |
2 |
| Volumetric strain measurement of polymeric materials subjected to uniaxial tension |
2 |
| Fracturing behaviour of sandstone specimens with a cavity formed by intersecting excavations under compression: Experimental study and numerical modelling |
2 |
| Design of heterogeneous mechanical tests: Numerical methodology and experimental validation |
2 |
| Validation of a multimodal set-up for the study of zirconium alloys claddings' behaviour under simulated LOCA conditions |
2 |
| Energy stored during deformation of crystallizing TPU foams |
2 |
| A nonconstraining templated powder grid for measurement of strain |
2 |
| Experimental stress analysis of an arbitrary geometry containing irregularly shaped hole |
2 |
| Ultrasonic Lamb wave-based debonding monitoring of advanced honeycomb sandwich composite structures |
2 |
| Fourier-series-based virtual fields method combining with moire interferometry for characterising elastic modulus distribution of laser repaired GH4169 |
1 |
| Effect of continuous strain path changes on forming limit strains of DP600 |
1 |
| Virtual image correlation of magnetic resonance images for 3D geometric modelling of pelvic organs |
1 |
| Evaluation of power extraction circuits on piezo transducers operating under low-frequency vibration induced strains in bridges |
1 |
| Analysis of thermal strains and stresses in heated fibre metal laminates |
1 |
| Use of digital image correlation to measure strain recovery in particle toughened thermoset resins |
1 |
| High strain rate out-of-plane compression of birch plywood from ambient to cryogenic temperatures |
1 |
| Strain measurements on compliant knitted mesh used in space antennas, by means of 2D Fourier analysis |
1 |
| Automatizing the comparison of NMR depth profiles |
1 |
| Combination of FEM simulations and shearography for defect detection on artwork |
1 |
| Time-domain imaging system in the terahertz range for immovable cultural heritage materials |
1 |
| Egyptian blue pigment in East Mediterranean wall paintings: A study of the lifetime of its optical infrared emission |
1 |
| Double bridge circuit for self-validated structural health monitoring strain measurements |
1 |
| Visualisation of deformation gradients in structural steel by macroscopic magnetic domain distribution imaging (Bitter technique) |
1 |
| A parametric study of DIC measurement uncertainties on cracked metals |
1 |
| Passive infrared thermography measurement of transverse cracking evolution in cross-ply laminates |
0 |
| Direct measurement and master curve construction of viscoelastic Poisson's ratio with digital image correlation |
0 |
| Correlation between uniaxial ratcheting and magnetic response under cyclic loadings in X80 pipeline steel |
0 |
| A novel test configuration design method for inverse identification of in-plane moduli of a composite plate under the PFEUM framework |
0 |
| Processing relative humidity data using discrete Fourier transform to control strain in art objects |
0 |
