| Survival of aerosolized coronavirus in the ambient air |
33 |
| Review on the physics of electrospray: From electrokinetics to the operating conditions of single and coaxial Taylor cone-jets, and AC electrospray |
29 |
| Electrosprays in the cone-jet mode: From Taylor cone formation to spray development |
25 |
| Characteristics of total airborne microbes at various air quality levels |
17 |
| Electrospraying an enabling technology for pharmaceutical and biomedical applications: A review |
15 |
| Electrospray application to powder production and surface coating |
15 |
| The effects of volcanic eruptions on the frequency of particulate matter suspension events in Iceland |
11 |
| Electrospray deposition of biomolecules: Applications, challenges, and recommendations |
11 |
| The impact of ambient humidity on the evaporation and dispersion of exhaled breathing droplets: A numerical investigation |
11 |
| Numerical and experimental study of submicron aerosol deposition in electret microfiber nonwovens |
10 |
| Polymer solution electrospraying: A tool for engineering particles and films with controlled morphology |
10 |
| Parametric synthesis study of iron based nanoparticles via aerosol spray pyrolysis route |
10 |
| Role of viral bioaerosols in nosocomial infections and measures for prevention and control |
9 |
| Adhesion of tungsten particles on rough tungsten surfaces using Atomic Force Microscopy |
9 |
| Numerical simulation of corona discharge and particle transport behavior with the particle space charge effect |
9 |
| Insights into the role of ionic wind in honeycomb electrostatic precipitators |
9 |
| Enhancing the detection efficiency of condensation particle counters for sub-2 nm particles |
8 |
| Characteristics of tire wear particles generated in a laboratory simulation of tire/road contact conditions |
8 |
| Size, effective density, morphology, and nano-structure of soot particles generated from buoyant turbulent diffusion flames |
8 |
| Oxidative potential of particulate matter components generated by specific emission sources (Retracted article. See vol. 2020) |
8 |
| Nano-particle deposition in the presence of electric field |
7 |
| Review on water electro-sprays and applications of charged drops with focus on the corona-assisted cone-jet mode for High Efficiency Air Filtration by wet electro-scrubbing of aerosols |
7 |
| Subject-variability effects on micron particle deposition in human nasal cavities |
7 |
| Simulation of size-dependent aerosol deposition in a realistic model of the upper human airways |
7 |
| Phase change and deposition of inhaled droplets in the human nasal cavity under cyclic inspiratory airflow |
7 |
| A finite element method (FEM) study on adhesive particle-wall normal collision |
7 |
| A multiphysics model for analysis of droplet formation in electrohydrodynamic 3D printing process |
7 |
| Characterization and modeling of aerosol deposition in Vitrocell (R) exposure systems - exposure well chamber deposition efficiency |
7 |
| A novel moment method using the log skew normal distribution for particle coagulation |
6 |
| Natural periodicity of electrohydrodynamic spraying in ethanol |
6 |
| In silico assessment of mouth-throat effects on regional deposition in the upper tracheobronchial airways |
6 |
| Modelling the effect of aerosol polydispersity on unipolar charging and measurement in low-cost sensors |
6 |
| Measurements of electronic cigarette-generated particles for the evaluation of lung cancer risk of active and passive users |
6 |
| Bioaerosol: A bridge and opportunity for many scientific research fields |
6 |
| Comparison of manual and automatic approaches for characterisation of morphology and nanostructure of soot particles |
6 |
| The effect of circuit resistance on the particle output of a spark discharge nanoparticle generator |
6 |
| Lung aerosol dynamics of airborne influenza A virus-laden droplets and the resultant immune system responses: An in silico study |
6 |
| A laboratory experimental study on laser attenuations by dust/sand storms |
6 |
| Calibration of optical particle counters with an aerodynamic aerosol classifier |
5 |
| Particle nucleation-accumulation mode trade-off: A second diesel dilemma? |
5 |
| A semi-automatic analysis tool for the determination of primary particle size, overlap coefficient and specific surface area of nanoparticles aggregates |
5 |
| Multispecies aerosol evolution and deposition in a bent pipe |
5 |
| CFD Simulation of aerosol particle removal by water spray in the model containment THAI |
5 |
| Deposition of glass fibers in a physically realistic replica of the human respiratory tract |
5 |
| A high-flow portable biological aerosol trap (HighBioTrap) for rapid microbial detection |
5 |
| Gas phase synthesis of metallic and bimetallic catalyst nanoparticles by rod-to-tube type spark discharge generator |
5 |
| Nanostructured porous coatings via electrospray atomization and deposition of nanoparticle suspensions |
5 |
| Analysis of ultrafine metal oxide particles in aerosols using mobility-resolved time-of-flight mass spectrometry |
5 |
| Finite volume approximation of nonlinear agglomeration population balance equation on triangular grid |
5 |
| Recommendations for simulating microparticle deposition at conditions similar to the upper airways with two-equation turbulence models |
5 |
