| In Situ Semibatch Emulsion Polymerization of 2-Ethyl Hexyl Acrylate/n-Butyl Acrylate/Methyl Methacrylate/Cellulose Nanocrystal Nanocomposites for Adhesive Applications |
10 |
| Polymer Nanocomposites for Emulsion-Based Coatings and Adhesives |
6 |
| Particle Growth during the Polymerization of Olefins on Supported Catalysts. Part 2: Current Experimental Understanding and Modeling Progresses on Particle Fragmentation, Growth, and Morphology Development |
6 |
| Effect of Alkyl Aluminums on Ethylene Polymerization Reactions with a Cr-V Bimetallic Catalyst |
6 |
| Condensed Mode Cooling of Ethylene Polymerization in Fluidized Bed Reactors |
5 |
| A Monte Carlo Method to Quantify the Effect of Reactor Residence Time Distribution on Polyolefins Made with Heterogeneous Catalysts: Part ICatalyst/Polymer Particle Size Distribution Effects |
5 |
| Modeling of Semibatch Solution Radical Copolymerization of Butyl Methacrylate and 2-Hydroxyethyl Acrylate |
5 |
| A Methodology for Estimating Kinetic Parameters and Reactivity Ratios of Multi-site Type Catalysts Using Polymerization, Fractionation, and Spectroscopic Techniques |
4 |
| Preparation of Polymer Microparticles through Nonaqueous Suspension Polycondensations. Part IIEffects of Operating Variables on Properties of Poly(butylene succinate) |
4 |
| Synthesis of LDPE Using Pyridineimine-Based Nickel (II) Bromide Complexes: Effect of Catalyst Bulkiness on Thermal, Structural, and Morphological Properties |
4 |
| Unexpected Secondary Nucleation in Poly(Vinyl acetate) Nanoparticle Synthesis by Ab Initio Batch Emulsion Polymerization Using Poly(Vinyl alcohol) as Surfactant |
3 |
| A Simple Monte Carlo Method for Modeling Arborescent Polymer Production in Continuous Stirred Tank Reactor |
3 |
| Experimental Design and Statistical Analysis of AGET ATRP of MMA in Emulsion Polymer Reactor |
3 |
| Effects of Reaction Operation Policies on Properties of Core-Shell Polymer Supports Used for Preparation of Highly Active Biocatalysts |
3 |
| Phosphate-Loaded Hydrogel Nanoparticles for Sepsis Prevention Prepared via Inverse Miniemulsion Polymerization |
3 |
| Mathematical Modeling of Nylon 6/6 Copolymerization in Batch Reactor: Investigating Recipes without Water and with Cyclic Dimer |
3 |
| Assessment of Microwave Effect on Polymerization Conducted under ARGET ATRP Conditions |
3 |
| Bulk Free-Radical Co- and Terpolymerization of n-Butyl Acrylate/2-Ethylhexyl Acrylate/Methyl Methacrylate |
3 |
| Dynamic Monte Carlo Simulation of Olefin Block Copolymers (OBCs) Produced via Chain-Shuttling Polymerization: Effect of Kinetic Rate Constants on Chain Microstructure |
3 |
| Estimation of Polymerization Rate Constants Using Experimental Residence Time Studies in Industrial Pilot Plant Equipment |
3 |
| The Effect of Reactor Conditions on High-Impact Polypropylene Properties and Gas Phase Polymerization Kinetics |
3 |
| Mapping the Structure-Property Space of Bimodal Polyethylenes Using Response Surface Methods. Part 1: Digital Data Investigation |
2 |
| Modeling of Anionic Polymerization of Isoprene in an Industrial Reactor |
2 |
| Scale Inhibitor and Dispersant Based on Poly(Acrylic Acid) Obtained by Redox-Initiated Polymerization |
2 |
| Controlled Synthesis, Characterization, and Flow Properties of Ethylene-Diene Copolymers |
2 |
| Dependence of Propagation Rate Coefficients in Radical Polymerization on Solution Properties: A Quantitative Thermodynamic Interpretation |
2 |
| A Modeling Study on the RAFT Polymerization of Vinyl Monomers in Supercritical Carbon Dioxide |
2 |
| Effect of Phosphate Salt Concentration and Solution pH on the Aqueous-Phase Homo and Copolymerization of N-Vinyl Pyrrolidone |
2 |
| A Dynamic Simulator for Slurry-Phase Catalytic Olefin Copolymerization in a Series of CSTRs: Prediction of Distributed Molecular and Rheological Properties |
2 |
| Mathematical Modeling of the Molecular Weight Distribution in Low Density Polyethylene. I. Steady-State Operation of Multizone Autoclave Reactors |
2 |
| Kinetics of Bulk Free-Radical Polymerization of Butyl Methacrylate Isomers Studied by Reaction Calorimetry |
2 |
| Composite Particles From Pickering-Stabilized Radical Mediated Thiol-Ene Suspension Polymerizations |
2 |
| Design of Acrylic Dispersants for Nonaqueous Dispersion Polymerization: The Importance of Thermodynamics |
1 |
| Estimation of Reactivity Ratios in the RAFT Copolymerization of Styrene and Glycidyl Methacrylate |
1 |
| Silsesquioxane-Supported Chromium Catalyst for Insight into Phillips-Type Ethylene Polymerization |
1 |
| Decoupling Study of Melt Polycondensation of Polycarbonate: Experimental and Modeling of Reaction Kinetics and Mass Transfer in Thin Films Polycondensation Process |
1 |
| The Effect of Residence Time Distribution on the Slurry-Phase Catalytic Ethylene Polymerization: An Experimental and Computational Study |
1 |
| Nitroxide-Mediated Polymerization of Bio-Based Farnesene with a Functionalized Methacrylate |
1 |
| A Closed-Loop Control Strategy for Producing Nitrile Rubber of Uniform Chemical Composition in a Semibatch Reactor: A Simulation Study |
1 |
| A Monte Carlo Method to Quantify the Effect of Reactor Residence Time Distribution on Polyolefins Made with Heterogeneous Catalysts: Part IIIParticle Composition Distribution Effects |
1 |
| A Monte Carlo Method to Quantify the Effect of Reactor Residence Time Distribution on Polyolefins Made with Heterogeneous Catalysts: Part IVIntraparticle Transfer Resistance Effects |
1 |
| Synthesis of Cyclic (Ethylene Furanoate) Oligomers via Cyclodepolymerization |
1 |
| Tailoring Uniform Copolymer Composition Distribution via Policy II RAFT Solution Copolymerization of Styrene and Butyl Acrylate |
1 |
| Tuning Bis(imino)pyridyl Iron-Catalyzed Ethylene Oligomerization by Modification of MAO with p-BrPhOH |
1 |
| High Solid Acrylic-Melamine Latexes with Tunable Crosslinking Capability |
1 |
| Modeling Equilibrium Behavior of Nylon Nylon 6 and Nylon 6/6 Copolymer |
1 |
| High Molecular Weight Polystyrene Obtained by Cationic Emulsion Polymerization Catalyzed by Imidazolium-Based Ionic Liquid |
1 |
| Design of Nonlinear Model-Based Control Using Bifurcation Analysis for Solution Polymerizations Carried Out in Lumped-Distributed Reactors |
1 |
| Design and Preparation of Highly Filled Water-Borne Polymer-Gibbsite Nanocomposites |
1 |
| Side Reactions in Aqueous Phase Polymerization of N-Vinyl-Pyrrolidone as Possible Source for Fouling |
1 |
