| Modeling and simulation in tribology across scales: An overview |
51 |
| Unique synergistic effects of graphene oxide and carbon nanotube hybrids on the tribological properties of polyimide nanocomposites |
38 |
| The effect of addition of hBN nanoparticles to nanofluid-MQL on tool wear patterns, tool life, roughness and temperature in turning of Ni-based Inconel 625 |
36 |
| High temperature solid-lubricating materials: A review |
31 |
| The impact of tribology on energy use and CO2 emission globally and in combustion engine and electric cars |
30 |
| Experimental investigation of the tribological behavior of lubricants with additive containing copper nanoparticles |
30 |
| Self-lubricating composites containing MoS2: A review |
28 |
| Novel uses of alumina/graphene hybrid nanoparticle additives for improved tribological properties of lubricant in turning operation |
27 |
| Tool wear behaviors and corresponding machined surface topography during high-speed machining of Ti-6Al-4V with fine grain tools |
27 |
| Influence of surface texturing on hydrodynamic friction in plane converging bearings - An experimental and numerical approach |
25 |
| Dispersing mechanism and tribological performance of vegetable oil-based CNT nanofluids with different surfactants |
25 |
| Novel approach of the graphene nanolubricant for energy saving via anti-friction/wear in automobile engines |
24 |
| Mechanical and tribological behaviors of copper metal matrix composites for brake pads used in high-speed trains |
24 |
| Tribological performance of selective laser melted 316L stainless steel |
23 |
| Investigation of tool wear in the turning of Inconel 718 superalloy in terms of process performance and productivity enhancement |
21 |
| Preparation and tribological properties of core-shell Fe3O4@C microspheres |
20 |
| Friction and wear characteristics of TiO2 nano-additive water-based lubricant on ferritic stainless steel |
20 |
| Development of durable self-cleaning superhydrophobic coatings for aluminium surfaces via chemical etching method |
19 |
| Enhancing of the tribological characteristics of the lubricant oils using Ni-promoted MoS2 nanosheets as nano-additives |
18 |
| Influence of silane treatment on the mechanical, tribological and morphological properties of corn stalk fiber reinforced polymer composites |
18 |
| Experimental comparison of the performance of nanofluids, cryogenic and hybrid cooling in turning of Inconel 625 |
18 |
| Performances of different eco-friendly nanofluid lubricants in the milling of Inconel X-750 superalloy |
18 |
| Tribological behavior and self-healing functionality of M50 material covered with surface micropores filled with Sn-Ag-Cu |
18 |
| Tool wear mechanisms and micro-channels quality in micro-machining of Ti-6Al-4V alloy using the Ti(C7N3)-based cermet micro-mills |
17 |
| High mechanical and tribological performance polyimide nanocomposites using amine-functionalized graphene nanosheets |
17 |
| Fretting fatigue crack nucleation: A review |
17 |
| Solid Lubricant-assisted Minimum Quantity Lubrication and Cooling strategies to improve Ti6Al4V machinability in finishing turning |
17 |
| Performance of modified jatropha oil in combination with hexagonal boron nitride particles as a bio-based lubricant for green machining |
16 |
| Fatty acid based phosphite ionic liquids as multifunctional lubricant additives in mineral oil and refined vegetable oil |
16 |
| Pin-on-disc investigation on copper-free friction materials dry sliding against cast iron |
15 |
| Durable and regenerable superhydrophobic coatings for brass surfaces with excellent self-cleaning and anti-fogging properties prepared by immersion technique |
15 |
| Effect of stress gradient and quadrant averaging on fretting fatigue crack initiation angle and life |
15 |
| Friction and abrasive wear behaviour of Al2O3-13TiO(2) and Al2O3-13TiO(2)+Ni Graphite coatings |
15 |
| Prediction of fretting fatigue crack initiation location and direction using cohesive zone model |
15 |
| Tribological characteristics of graphene as grease additive under different contact forms |
14 |
| The effect of prior cold rolling on the carbide dissolution, precipitation and dry wear behaviors of M50 bearing steel |
14 |
| Formation of the third bodies of steel sliding against brass under lubricated conditions |
14 |
| Facile one pot pyrolysis synthesis of carbon quantum dots and graphene oxide nanomaterials: All carbon hybrids as eco-environmental lubricants for low friction and remarkable wear-resistance |
14 |
| A transient hydrodynamic lubrication comparative analysis for misaligned micro-grooved bearing considering axial reciprocating movement of shaft |
14 |
| Study on influence of Koch snowflake surface texture on tribological performance for marine water-lubricated bearings |
14 |
| Investigation of the tribological behavior of graphene oxide nanoplates as lubricant additives for ceramic/steel contact |
14 |
| Tribological behaviour of high performance polymers and polymer composites at elevated temperature |
14 |
| Investigation of machinability in turning of difficult-to-cut materials using a new cryogenic cooling approach |
14 |
| Influence of the micromorphology of reduced graphene oxide sheets on lubrication properties as a lubrication additive |
14 |
| High temperature and high pressure tribological experiments of advanced polymeric coatings in the presence of drilling mud for oil & gas applications |
13 |
| Effect of adhesion and tribological properties of modified composite nano-structured multi-layer nitride coatings on WC-Co tools life |
13 |
| Wear numerical assessment for partial slip fretting fatigue conditions |
13 |
| Scratch-tip-size effect and change of friction coefficient in nano/micro scratch tests using XFEM |
13 |
| Tribological behaviour of MoS2-based self-lubricating laser cladding for use in high temperature applications |
13 |
| Thermohydrodynamic analysis of high speed water-lubricated spiral groove thrust bearing considering effects of cavitation, inertia and turbulence |
13 |
