| Impact of thermal modification on color and chemical changes of spruce and oak wood |
15 |
| Development of bamboo scrimber: a literature review |
13 |
| Effect of alkali treatment on wettability and thermal stability of individual bamboo fibers |
11 |
| Lignosulfonate/APP IFR and its flame retardancy in lignosulfonate-based rigid polyurethane foams |
10 |
| Antifungal and antitermitic activities of wood vinegar from oil palm trunk |
10 |
| Mechanical and physical properties of Cross-Laminated Timber made from Acacia mangium wood as function of adhesive types |
6 |
| Physical and mechanical properties of composites made from bamboo and woody wastes in Taiwan |
6 |
| Cyclic behavior of Chinese ancient wooden frame with mortise-tenon joints: friction constitutive model and finite element modelling |
5 |
| Moisture-dependent orthotropic viscoelastic properties of Chinese fir wood in low temperature environment |
5 |
| Investigation of changes in compressed moso bamboo (Phyllostachys pubescens) after hot-press molding |
5 |
| A finite element model of semi-rigid mortise-and-tenon joint considering glue line and friction coefficient |
5 |
| Changes in chemical and optical properties of silver fir (Abies alba L.) wood due to thermal treatment |
5 |
| Geographical variations of lumber quality of Larix sibirica naturally grown in five different provenances of Mongolia |
5 |
| The bending properties of bamboo strand board I-beams |
5 |
| Improvement of surface photostability of bamboo scrimber by application of organic UV absorber coatings |
5 |
| The influence of pressure sum, fiber blend ratio, and basis weight on wet strength and dispersibility of wood pulp/Lyocell wetlaid/spunlace nonwovens |
5 |
| Determination of physical and chemical properties and degradation of archeological Japanese cypress wood from the Tohyamago area using near-infrared spectroscopy |
4 |
| Numerical analysis on tensile performance of bolted glulam joints with initial local cracks |
4 |
| Properties of flat-pressed wood plastic composites as a function of particle size and mixing ratio |
4 |
| The surface chemical constituent analysis of poplar fibrosis veneers during heat treatment |
4 |
| Mechanical properties of wood/plastic composites formed using wood flour produced by wet ball-milling under various milling times and drying methods |
4 |
| Lateral strength of nailed timber connections with decay |
4 |
| Practical techniques for the vibration method with additional mass: bending vibration generated by tapping cross section |
4 |
| Physiological effects of touching hinoki cypress (Chamaecyparis obtusa) |
4 |
| Vanillin production from native softwood lignin in the presence of tetrabutylammonium ion |
4 |
| Automated identification of Lauraceae by scale-invariant feature transform |
4 |
| Acoustic emission signal source localization on plywood surface with cross-correlation method |
4 |
| Theoretical model and finite element analysis for restoring moment at column foot during rocking |
4 |
| Temperature dependences of the dynamic viscoelastic properties of wood and acetylated wood swollen by water or organic liquids |
4 |
| Changes in gas permeability and pore structure of wood under heat treating temperature conditions |
4 |
| Performance evaluation of multi-storey cross-laminated timber structures under different earthquake hazard levels |
3 |
| Properties of low-density cement-bonded composite panels manufactured from polystyrene and jute stick particles |
3 |
| Resistance of wood from black pine (Pinus nigra var. austriaca) against weathering |
3 |
| Application of the vibration method with additional mass to timber guardrail beams |
3 |
| Some advantages of three-layer medium-density fibreboard as compared to the traditional single-layer one |
3 |
| Transverse shrinkage variations within tree stems of Melia azedarach planted in northern Vietnam |
3 |
| Effects of preheating temperature, preheating time and their interaction on the sandwich structure formation and density profile of sandwich compressed wood |
3 |
| Comparison of the anatomical characteristics and physical and mechanical properties of oil palm and bamboo trunks |
3 |
| Thermopolymerization inhibitors generated via radiolysis of lignin |
3 |
| Effects of peeling and steam-heating treatment on mechanical properties and dimensional stability of oriented Phyllostachys makinoi and Phyllostachys pubescens scrimber boards |
3 |
| Effects of density and anatomical feature on mechanical properties of various wood species in lateral tension |
3 |
| Development of bark-based adhesives for plywood: utilization of flavonoid compounds from bark and wood. II |
3 |
| Evaluating dimensional stability in solid wood: a review of current practice |
3 |
| The gene expression analysis of Arabidopsis thaliana ABC transporters by real-time PCR for screening monolignol-transporter candidates |
3 |
| A comparative study of the microstructure and water permeability between flattened bamboo and bamboo culm |
3 |
| Effects of modification with a combination of styrene-acrylic copolymer dispersion and sodium silicate on the mechanical properties of wood |
3 |
| The effects of chemical components and particle size on the mechanical properties of binderless boards made from oak (Quercus spp.) logs degraded by shiitake fungi (Lentinula edodes) |
3 |
| Environmental factors and wood qualities of African blackwood, Dalbergia melanoxylon, in Tanzanian Miombo natural forest |
3 |
| Stereo-preference in the degradation of the erythro and threo isomers of beta-O-4-type lignin model compounds in oxidation processes III: in the reaction with chlorine- and manganese-based oxidants |
3 |
| Within-stem variations in mechanical properties of Melia azedarach planted in northern Vietnam |
3 |
