| Imperfection Sensitivity: A Review of Buckling Behavior of Cones, Cylinders, and Domes |
8 |
| Numerical Analysis of Mechanical Behavior of Buried Pipes in Subsidence Area Caused by Underground Mining |
6 |
| Investigation on Redesigning Strategies for Water-Hammer Control in Pressurized-Piping Systems |
4 |
| Characteristics of Acoustic Resonance Excitation by Flow Around Inline Cylinders |
4 |
| Pipeline Valves Technology, Material Selection, Welding, and Stress Analysis (A Case Study of a 30 in Class 1500 Pipeline Ball Valve) |
4 |
| Problems and Perspectives in Seismic Quantitative Risk Analysis of Chemical Process Plants |
4 |
| Enhanced Seismic Fragility Analysis of Unanchored Steel Storage Tanks Accounting for Uncertain Modeling Parameters |
4 |
| Observational Seismic Fragility Curves for Steel Cylindrical Tanks |
4 |
| Autogenous Tungsten Inert Gas and Gas Tungsten Arc With Filler Welding of Dissimilar P91 and P92 Steels |
4 |
| Development of Stress Intensity Factors for Subsurface Flaws in Plates Subjected to Polynomial Stress Distributions |
4 |
| Prediction of Pressure Variation at an Elbow Subsequent to a Liquid Slug Impact by Using Smoothed Particle Hydrodynamics |
3 |
| Experiment Study on Fluidelastic Instability of Tube Bundles Consisting of Different Frequency Tubes With Visual Image Processing System |
3 |
| Creep-Fatigue Behaviors and Life Assessments in Two Nickel-Based Superalloys |
3 |
| Analysis of Residual Stress in the Rotational Autofrettage of Thick-Walled Disks |
3 |
| Electrochemical Corrosion Finite Element Analysis and Burst Pressure Prediction of Externally Corroded Underground Gas Transmission Pipelines |
3 |
| Theoretical and Finite Element Analysis of Residual Stress Field for Different Geometrical Features After Abrasive Waterjet Peening |
3 |
| Analytical and Numerical Studies of a Thick Anisotropic Multilayered Fiber-Reinforced Composite Pressure Vessel |
3 |
| Dynamic Stress Analysis on Barrel Considering the Radial Effect of Propellant Gas Flow |
3 |
| Experimental and Numerical Analysis of Water Jet Peening on 6061 Aluminum Alloy |
3 |
| Notch Effect on Structural Strength of Components at Elevated Temperature Under Creep, Fatigue, and Creep-Fatigue Loading Conditions: Phenomenon and Mechanism |
3 |
| Rapid Liquid Filling of a Pipe With Venting Entrapped Gas: Analytical and Numerical Solutions |
3 |
| Effect of Weld Cooling Rates on Mechanical and Metallurgical Properties of Submerged Arc Welded Pressure Vessel Steel |
3 |
| Effects of Stress-Strain Characteristics on Local Buckling of X80 Pipe Subjected to Strike-Slip Fault Movement |
3 |
| Field Measurement and Numerical Study of the Vibration in the Pipeline of Centrifugal Compressor |
3 |
| Plastic Collapse Stresses for Pipes With Inner and Outer Circumferential Cracks |
2 |
| Variational Method in Limit Load Analysis-A Review |
2 |
| Welding Residual Stress in HDPE Pipes: Measurement and Numerical Simulation |
2 |
| Damage and Springback Analysis of Two Typical Dented Pipelines With Different Parameters |
2 |
| Fragility Evaluation in Building-Piping Systems: Effect of Piping Interaction With Buildings |
2 |
| Elastic Interaction in Bolted Flange Joints: An Analytical Model to Predict and Optimize Bolt Load |
2 |
| Seismic Performance Evaluation of Liquid Storage Tanks Using Nonlinear Static Procedures |
2 |
| Design of TiO2-SiO2-MgO and SiO2-MgO-Al2O3-Based Submerged Arc Fluxes for Multipass Bead on Plate Pipeline Steel Welds |
2 |
| Generalized Plane Strain Study of Rotational Autofrettage of Thick-Walled Cylinders-Part II: Numerical Evaluation |
2 |
| HITEP_RCC-MRx Program for the Support of Elevated Temperature Design Evaluation and Defect Assessment |
2 |
| Generalized Plane Strain Study of Rotational Autofrettage of Thick-Walled Cylinders-Part I: Theoretical Analysis |
2 |
| Near-Wake Characteristics and Acoustic Resonance Excitation of Crimped Spirally Finned Cylinders in Cross-Flow |
2 |
| Optimal Design and Experimental Research of the Anti-Cavitation Structure in the Water Hydraulic Relief Valve |
2 |
| Optimization of Operation Parameters for Direct Spring Loaded Pressure Relief Valve in a Pipeline System |
2 |
| Determination of Repair Weld Residual Stress in a Tube to Tube-Sheet Joint by Neutron Diffraction and the Finite Element Method |
2 |
| Principal Stress-Based Equation for Multi-Axial Fatigue Analysis of Preloaded Threaded Fasteners |
2 |
| Evaluation of Magnetostrictive Transducers for Guided Wave Monitoring of Pressurized Pipe at 200 degrees C |
2 |
| Fatigue Measurement of Pipeline Steels for the Application of Transporting Gaseous Hydrogen |
2 |
| Operational Modal Analysis of a Triangular-Pitch Tube Bundle Subjected to Two-Phase Cross-Flow |
2 |
| Vibration-Based Structural Damage Identification and Evaluation for Cylindrical Shells Using Modified Transfer Entropy Theory |
2 |
| Short-Term Mechanical Analysis of Polyethylene Pipe Reinforced by Winding Steel Wires Using Steel Wire Spiral Structural Model |
2 |
| Nonproprietary Flow-Induced Vibration Analysis of San Onofre Nuclear Generating Station Replacement Steam Generators to ASME Code Section III Appendix N |
2 |
| Mechanical Properties Characterization and Finite Element Analysis of Epoxy Grouts in Repairing Damaged Pipeline |
2 |
| On the Influence of the Corrosion Defect Size in the Welding Bead, Heat-Affected Zone, and Base Metal in Pipeline Failure Pressure Estimation: A Finite Element Analysis Study |
2 |
| Limited Versus Unlimited Strain Accumulation Due to Ratcheting Mechanisms |
2 |
| Analytical Modeling of Self-Loosening of Bolted Joints Subjected to Transverse Loading |
2 |
