| A new approach for estimation of rock brittleness based on non-destructive tests |
20 |
| Vibration-based damage detection in beam structures with multiple cracks: modal curvature vs. modal flexibility methods |
11 |
| Assessment of hydration process and mechanical properties of cemented paste backfill by electrical resistivity measurement |
11 |
| Research and implementation of ceramic valve spool surface defect detection system based on region and multilevel optimisation |
6 |
| 'Optical-acoustic-stress' responses in failure progress of cemented gangue-fly ash backfill material under uniaxial compression |
5 |
| Quantitative nondestructive testing of wire rope based on pseudo-color image enhancement technology |
5 |
| Theoretical investigation of metal magnetic memory testing technique for detection of magnetic flux leakage signals from buried defect |
5 |
| Characterization of failure mechanism in glass, carbon and their hybrid composite laminates in epoxy resin by acoustic emission monitoring |
4 |
| Digitised Frequency Modulated Thermal Wave Imaging for Non-destructive Testing and Evaluation of Glass Fibre Reinforced Polymers |
4 |
| A review of microwave testing of glass fibre-reinforced polymer composites |
3 |
| Quantification of delamination in a composite floor using a novel damage index |
3 |
| Characterising fundamental properties of foam concrete with a non-destructive technique |
3 |
| Lift-off nulling and internal state inspection of multi-layer conductive structures by combined signal features in pulsed eddy current testing |
3 |
| Reliability and sensitivity of magnetic particle nondestructive testing in detecting the surface cracks of welded components |
3 |
| Method for detecting damage in carbon-fibre reinforced plastic-steel structures based on eddy current pulsed thermography |
3 |
| Multipoint cure monitoring of temperature and strain of carbon fibre-reinforced plastic shafts using fibre Bragg grating sensors |
3 |
| Characterisation of work-hardening in Hadfield steel using non-destructive eddy current method |
2 |
| Effectiveness of phased array focused ultrasound and active infrared thermography methods as a nondestructive testing of Ni-WC coating adhesion |
2 |
| Accuracy of X-ray diffraction measurement of residual stresses in shot peened titanium alloy samples |
2 |
| Coded thermal wave imaging technique for infrared non-destructive testing and evaluation |
2 |
| A simplified modal-based method to quantify delamination in carbon fibre-reinforced plastic beam |
2 |
| Nondestructive testing of moisture separator reheater tubing system using Hall sensor array |
2 |
| Weld defect classification using 1-D LBP feature extraction of ultrasonic signals |
2 |
| Damage detection in composite structures with high-damping materials using time reversal method |
2 |
| Enhanced defect detection in radiography images of welded objects |
2 |
| Grain size effect on L-cr elastic wave for surface stress measurement of carbon steel |
2 |
| Characteristic equation for antiresonant frequencies of multiple cracked bars and application for crack detection |
1 |
| Evaluation of three nondestructive testing techniques for quality assessment of asphalt pavements |
1 |
| Application of ECT technology with a miniature PCB-based spiral coil in the visualization of CFRP laminates |
1 |
| Eddy current O-scan and C-scan imaging techniques for macrocrack detection in silicon solar cells |
1 |
| Grain size effect on metal magnetic memory signal for stress damage evaluation of low carbon steel |
1 |
| Analytical model for mutual inductance between two rectangular coils in driver pickup mode for eddy current testing |
1 |
| Optimal design of spiral coil electromagnetic acoustic transducers considering lift-off sensitivity operating on non-ferromagnetic media |
1 |
| Localised surface plasmon-like resonance generated by microwave electromagnetic waves in pipe defects |
1 |
| In-situ monitoring of alpha -> beta phase transformation in Ti-6Al-6V-2Sn using laser ultrasonics |
1 |
| Application of low-frequency eddy current testing to the inspection of a double-walled tank in a reprocessing plant |
1 |
| Numerical simulations of electric potential field for alternating current potential drop associated with surface cracks in low-alloy steel nuclear material |
1 |
| Nondestructive examination of recovery stage during annealing of a cold-rolled low-carbon steel using eddy current testing technique |
0 |
| Low sidelobe level and high time resolution for metallic ultrasonic testing with linear-chirp-Golay coded excitation |
0 |
| Nondestructive examination of decarburised layer of steels using eddy current and magnetic Barkhausen noise testing techniques |
0 |
| Magnetic testing for inter-granular crack defect of tubing coupling |
0 |
| The study of micro-crack localisation based on vibro-acoustic modulation and time reversal method |
0 |
| Evaluation of pavement surface texture at the network level |
0 |
| An intelligent wire fault diagnosis approach using time domain reflectometry and pattern recognition network |
0 |
| Defect localisation and quantitative identification in multi-layer conductive structures based on projection pursuit algorithm |
0 |
| Fatigue crack detection and fatigue damage imaging using the non-collinear transverse wave mixing technique |
0 |
| A universal NDT method for examination of low energy impact damage in CFRP with the use of TLC film |
0 |
| Application of HDS techniques to bridge inspection |
0 |
| Ultrasonic detection of contour node represented voids and cracks |
0 |
| Sparse decomposition-based 3D ultrasound imaging and its application in pipeline defect testing using a multi-transducer composite array |
0 |
