| Preparation of monodisperse W/O emulsions using a stainless-steel microchannel emulsification chip |
13 |
| Microstructure and mechanical behavior of AA6082-T6/SiC/B4C-based aluminum hybrid composites |
12 |
| Synthesis and characterization of manganese ferrite nanostructure by co-precipitation, sol-gel, and hydrothermal methods |
12 |
| Fabrication and self-cleaning properties of reduced graphene oxide/TiO2:Nd nanohybrid thin films |
12 |
| Mechanical and tribological behaviour of tungsten carbide reinforced aluminum LM4 matrix composites |
10 |
| Mechanical and tribological properties of LM13/TiO2/MoS2 hybrid metal matrix composite synthesized by stir casting |
9 |
| Experiments and simulation of torque in Anton Paar powder cell |
8 |
| Functionalization of powdered walnut shell with orthophosphoric acid for Congo red dye removal |
8 |
| Z Tribological characterization of Al6061/alumina/graphite/redmud hybrid composite for brake rotor application |
8 |
| Surface modification of low-cost bentonite adsorbents-A review |
8 |
| Tribological behavior of ZA27/Al2O3/graphite hybrid nanocomposites |
7 |
| Magnetic Fe3O4-chitosan micro- and nanoparticles for wastewater treatment |
7 |
| Green synthesis of silver nanoparticles using Nervalia zeylanica leaf extract and evaluation of their antioxidant, catalytic, and antimicrobial potentials |
7 |
| Prediction of mechanical properties and modeling on sliding wear behavior of LM25/TiC composite using response surface methodology |
7 |
| Biomimetic synthesis of platinum nanoparticles utilizing a terrestrial weed Antigonon leptopus |
7 |
| Phytochemicals-mediated green synthesis of gold nanoparticles using Pterocarpus santalinus L. (Red Sanders) bark extract and their antimicrobial properties |
6 |
| Development and evaluation of nanostructured lipid carriers-based gel of isotretinoin |
6 |
| Validation of CFD model of multiphase flow through pipeline and annular geometries |
6 |
| Cylindrical-design, dehydration, and sorption properties of easily synthesized magnesium phosphosilicate nanopowder |
6 |
| Analysis on effect of electroless coated SiCp on mechanical properties of polymer matrix composites |
6 |
| Influence of redmud particle hybridization in banana/sisal and sisal/glass composites |
6 |
| Preparation and characterization of ketorolac tromethamine-loaded ethyl cellulose micro-/nanospheres using different techniques |
6 |
| Experimental investigation and optimization of machining parameters in drilling of fly ash-filled carbon fiber reinforced composites |
5 |
| Enhanced photocatalytic activity of Fe3O4-WO3-APTES for azo dye removal from aqueous solutions in the presence of visible irradiation |
5 |
| Analysis of particles in magnetorheological polishing fluid for finishing of ferromagnetic cylindrical workpiece |
5 |
| Hybrid sonochemic urea-nitrate combustion preparation of CuO/ZnO/Al2O3 nanocatalyst used in fuel cell-grade hydrogen production from methanol: Effect of sonication and fuel/nitrate ratio |
5 |
| Study to observe the applicability of the adsorption isotherms used for the adsorption of medicine organics onto activated carbon |
5 |
| Experimental investigations and CFD modeling for flow of highly concentrated iron ore slurry through horizontal pipeline |
5 |
| Effects of fine-coarse particles interaction on flotation separation and interaction energy calculation |
5 |
| Latent imidazole curing agents by microencapsulation with copolymers |
5 |
| Preparation and evaluation of vitamin C and folic acid-coloaded antioxidant liposomes |
5 |
| Adsorption of cerium and lanthanum from aqueous solutions by chitosan/polyvinyl alcohol/3-mercaptopropyltrimethoxysilane beads in batch and fixed-bed systems |
5 |
| Green synthesis of silver nanoparticles using Cyathea nilgirensis Holttum and their cytotoxic and phytotoxic potentials |
5 |
| Effect of palladium precursor and preparation method on the catalytic performance of Pd/SiO2 catalysts for benzene hydrogenation |
5 |
| Adsorption of phenol by MMT-CTAB and WPT-CTAB: Equilibrium, kinetic, and thermodynamic study |
5 |
| Insight into kinetics and thermodynamics properties of multicomponent lead(II), cadmium(II) and manganese(II) adsorption onto Dijah-Monkin bentonite clay |
4 |
| Effect of anodization time on the growth of twinned pyramid crystals of bismite from polyhedral bismuth particle by facile electrolysis-based oxidation |
4 |
| DEM simulation of binary sphere packing densification under vertical vibration |
4 |
| Preparation and characterization of solid lipid nanoparticles of furosemide using quality by design |
4 |
| Influences of inlet height and velocity on main performances in the cyclone separator |
4 |
| Study on three-body abrasive wear behavior of functionally graded Al/TiB2 composite using response surface methodology |
4 |
| Synthesis and photocatalytic studies of TiO2-clinoptilolite on spent caustic wastewater treatment |
4 |
| CFD modeling of dilute phase pneumatic conveying in a horizontal pipe using Euler-Euler approach |
4 |
| Investigations on mechanical and tribological properties of Al-Si10-Mg alloy/sugarcane bagasse ash particulate composites |
4 |
| Isotherm and kinetic sorption of some lanthanides and iron from aqueous solution by aluminum silicotitante exchanger |
4 |
| High efficiency of methylene blue removal using a novel low-cost acid treated forest wastes, Cupressus semperirens cones: Experimental results and modeling |
4 |
| Biosynthesis of gold nanoparticles using marine bacteria and Box-Behnken design optimization |
4 |
| Microwave-assisted combustion synthesis of ZnAl2O4 and ZnO nanostructure particles for photocatalytic wastewater treatment |
4 |
| CFD modeling of erosion wear in pipe bend for the flow of bottom ash suspension |
4 |
| Powder metallurgy of Al-based composites reinforced with Fe-based glassy particles: Effect of microstructural modification |
3 |
