| Bulk superconductors: a roadmap to applications |
33 |
| A trapped field of 17.7T in a stack of high temperature superconducting tape |
29 |
| Study of the magnetization loss of CORC (R) cables using a 3D T-A formulation |
23 |
| A review of commercial high temperature superconducting materials for large magnets: from wires and tapes to cables and conductors |
20 |
| Status of CORC (R) cables and wires for use in high-field magnets and power systems a decade after their introduction |
20 |
| Numerical modelling of dynamic resistance in high-temperature superconducting coated-conductor wires |
19 |
| Superconducting magnetic bearings simulation using an H-formulation finite element model |
16 |
| Recent breakthrough development in iron-based superconducting wires for practical applications |
16 |
| Power dissipation in HTS coated conductor coils under the simultaneous action of AC and DC currents and fields |
15 |
| Real-time simulation of large-scale HTS systems: multi-scale and homogeneous models using the T-A formulation |
15 |
| Measurements of crossed-field demagnetisation rate of trapped field magnets at high frequencies and below 77K |
14 |
| Fe-based superconducting thin films-preparation and tuning of superconducting properties |
14 |
| High transport current superconductivity in powder-in-tube Ba0.6K0.4Fe2As2 tapes at 27T |
13 |
| Progress in fabrication of second generation high temperature superconducting tape at Shanghai Superconductor Technology |
12 |
| Disentangling vortex pinning landscape in chemical solution deposited superconducting YBa2Cu3O7-x films and nanocomposites |
12 |
| Numerical modelling of mechanical stresses in bulk superconductor magnets with and without mechanical reinforcement |
12 |
| An experimental assessment of rotor superconducting stack demagnetization in a liquid nitrogen environment |
11 |
| Improvements of fabrication processes and enhancement of critical current densities in (Ba,K)Fe2As2 HIP wires and tapes |
11 |
| Exploiting flux jumps for pulsed field magnetisation |
11 |
| Metal-as-insulation variant of no-insulation HTS winding technique: pancake tests under high background magnetic field and high current at 4.2K |
11 |
| Promising effects of a new hat structure and double metal ring for mechanical reinforcement of a REBaCuO ring-shaped bulk during field-cooled magnetisation at 10T without fracture |
10 |
| The effect of fast neutron irradiation on the superconducting properties of REBCO coated conductors with and without artificial pinning centers |
10 |
| A trapped field of 14.3T in Y-Ba-Cu-O bulk superconductors fabricated by buffer-assisted seeded infiltration and growth |
10 |
| Modeling methodology for a HTS flux pump using a 2D H-formulation |
10 |
| Engineering current density over 5kAmm(-2) at 4.2K, 14T in thick film REBCO tapes |
10 |
| Magnetization and screening current in an 800 MHz (18.8 T) REBCO nuclear magnetic resonance insert magnet: experimental results and numerical analysis |
9 |
| NbN single-photon detectors with saturated dependence of quantum efficiency |
9 |
| Fault current limiting HTS transformer with extended fault withstand time |
9 |
| Review of annealing effects and superconductivity in Fe1+yTe1-xSex superconductors |
9 |
| The dynamic resistance of YBCO coated conductor wire: effect of DC current magnitude and applied field orientation |
9 |
| Stress and strain analysis of a REBCO high field coil based on the distribution of shielding current |
9 |
| Dynamic modeling of levitation of a superconducting bulk by coupled H-magnetic field and arbitrary Lagrangian-Eulerian formulations |
9 |
| Epitaxial YBa2Cu3O7-x nanocomposite films and coated conductors from BaMO3 (M = Zr, Hf) colloidal solutions |
9 |
| Radiation effects on iron-based superconductors |
9 |
| A viable dipole magnet concept with REBCO CORC (R) wires and further development needs for high-field magnet applications |
9 |
| Contact resistance between two REBCO tapes: the effects of cyclic loading and surface coating |
8 |
| Evidence of pinning crossover and the role of twin boundaries in the peak effect in FeSeTe iron based superconductor |
8 |
| Lateral motion stability of high-temperature superconducting maglev systems derived from a nonlinear guidance force hysteretic model |
8 |
| Strong-pinning regimes by spherical inclusions in anisotropic type-II superconductors |
8 |
| Dynamic simulations of actual superconducting maglev systems considering thermal and rotational effects |
8 |
| Substrate surface engineering for high-quality silicon/aluminum superconducting resonators |
7 |
| Chemical stability and superconductivity in Ag-sheathed CaKFe4As4 superconducting tapes |
7 |
| Flux pumping for non-insulated and metal-insulated HTS coils |
7 |
| The successful incorporation of Ag into single grain, Y-Ba-Cu-O bulk superconductors |
7 |
| A new concept of a hybrid trapped field magnet lens |
7 |
| Mixed-dimensional modeling of delamination in rare earth-barium-copperoxide coated conductors composed of laminated high-aspect-ratio thin films |
7 |
| A superconducting nanowire can be modeled by using SPICE |
7 |
| Control of artificial pinning centers in REBCO coated conductors derived from the trifluoroacetate metal-organic deposition process |
7 |
| High speed superconducting nanowire single-photon detector with nine interleaved nanowires |
7 |
| Proposal of an effective mechanical reinforcement structure for a REBaCuO disk bulk pair by full metal encapsulation to achieve a higher trapped field over 20T |
7 |
