| Experimental and numerical analysis of flexural and impact behaviour of glass/pp sandwich panel for automotive structural applications |
11 |
| Simulation on kink-band formation during axial compression of a unidirectional carbon fiber-reinforced plastic constructed by X-ray computed tomography images |
9 |
| Enhancement of mechanical and tribological properties of SiC- and CB-reinforced aluminium 7075 hybrid composites through friction stir processing |
8 |
| Review of Functional Properties of Natural Fiber-Reinforced Polymer Composites: Thermal Insulation, Biodegradation and Vibration Damping Properties |
8 |
| Three-dimensionally printed designable joint for carbon fibre reinforced plastics |
7 |
| Development of a three-dimensional finite element model for a unidirectional carbon fiber reinforced plastic based on X-ray computed tomography images and the numerical simulation on compression |
7 |
| Evaluation of the mechanical properties of carbon fiber/polymer resin interfaces by molecular simulation |
6 |
| Fabrication and mechanical characterization of continuous carbon fiber-reinforced thermoplastic using a preform by three-dimensional printing and via hot-press molding |
6 |
| Hygrothermal effects of glass fiber reinforced unsaturated polyester resin composites aged in steady and fluctuating conditions |
6 |
| Finite element analysis for the evaluation of the low-velocity impact response of a composite plate |
6 |
| Mechanical properties of carbon fiber paper reinforced thermoplastics using mixed discontinuous recycled carbon fibers |
5 |
| L-shaped structures made from ultrathin chopped carbon fiber tape reinforced thermoplastics: delamination behavior and optimization |
5 |
| Influence of sprayed multi-walled carbon nanotubes on mode I and mode II interlaminar fracture toughness of carbon fiber/epoxy composites |
5 |
| Bending fracture rule for 3D-printed curved continuous-fiber composite |
5 |
| Ultrasonic inspection of adhesively bonded CFRP/aluminum joints using pulsed laser scanning |
5 |
| Optimisation of hybridisation effect in graphene reinforced polymer nanocomposites |
5 |
| A study of stress concentrations around fiber breaks in unidirectional CF/epoxy composites using double-fiber fragmentation tests |
5 |
| An efficient modal strain energy-based damage detection for laminated composite plates |
5 |
| Estimation of biaxial tensile and compression behavior of polypropylene using molecular dynamics simulation |
4 |
| Long-term thermal stability of carbon fibre-reinforced addition-type polyimide composite in terms of compressive strength |
4 |
| Eco-friendly polyvinyl alcohol (PVA)/bamboo charcoal (BC) nanocomposites with superior mechanical and thermal properties |
4 |
| Improving bending characteristics of FRP sandwich structures with reinforcement webs |
4 |
| Noise reduction capability of hybrid flax fabric-reinforced polypropylene-based composites |
4 |
| Characteristic length determination of notched woven composites |
4 |
| Study of chemical and mechanical properties of Dharbai fiber reinforced polyester composites |
4 |
| Optimum structural design of CFRP isogrid cylindrical shell using genetic algorithm |
3 |
| Novel optimization method of single square FSS impinged and cascaded radar absorbing composites |
3 |
| Effect of inter-laminar toughened layers on process-induced strain and deformation of L-shaped composites |
3 |
| Data assimilation-based state estimation of composites during molding |
3 |
| Microscopic damage behavior in carbon fiber reinforced plastic laminates for a high accuracy antenna in a satellite under cyclic thermal loading |
3 |
| Parameter identification problem in one-parameter plasticity model for fibrous composites |
3 |
| Damping optimization of symmetrically laminated plates with transverse shear deformation using lamination parameters |
3 |
| Compression test of a single carbon fiber in a scanning electron microscope and its evaluation via finite element analysis |
3 |
| Energy absorption behaviour of braided basalt composite tube |
3 |
| Electrospun nanofiber composites with micro-/nano-particles for thermal insulation |
3 |
| Impact study on sandwich panels with and without stitching |
3 |
| Development of strain monitoring system for glass fiber reinforced composites via embedded electrically conductive pathways |
3 |
| Microstructure and mechanical properties of copper surface composite layers reinforced by nano and microscale SiC particles via friction stir processing |
2 |
| A new approach for evaluating crack growth resistance curve of mode II delamination by doubly end-notched tension tests |
2 |
| Non-contact visualization of fiber waviness distribution in carbon fiber composites using eddy current testing |
2 |
| Failure behavior of quasi-isotropic carbon fiber-reinforced polyamide composites under tension |
2 |
| Structural design and analyses of a fabric-covered wind turbine blade |
2 |
| A parametric study of skin laminates used in the composite layup of large-scale wind turbine blades |
2 |
| Experiment and analysis of unidirectional CFRP with a hole and crack as sandwich-form inhomogeneous composite |
2 |
| Experimental characterization of dynamic crack growth behavior in CFRP adhesive interface |
2 |
| Analysis of structure characteristics in laminated graphene oxide nanocomposites using molecular dynamics simulation |
2 |
| Cross-section analysis of wind turbine blades: comparison of failure between glass and carbon fiber |
2 |
| Evaluation of measurement method for carbon fiber length using an optical image scanner |
2 |
| Fabrication and morphological study of converged SiC-TiC fiber mats by electrospinning |
2 |
| Analytical investigation of thermal and mechanical load effects on stress distribution in adhesive layer of double-lap metal-composite bonded joints |
2 |
