| RHEOLOGICAL CHARACTERIZATION OF POLYANIONIC CELLULOSE SOLUTIONS WITH APPLICATION TO DRILLING FLUIDS AND CUTTINGS TRANSPORT MODELING |
7 |
| RHEOLOGICAL PROPERTIES OF DRILLING FLUIDS: USE OF DIMENSIONLESS SHEAR RATES IN HERSCHEL-BULKLEY AND POWER-LAW MODELS |
7 |
| Measurement of Drilling Fluid Rheology and Modeling of Thixotropic Behavior |
5 |
| HEAT TRANSFER OF THIRD-GRADE FLUID FLOW IN A PIPE UNDER AN EXTERNALLY APPLIED MAGNETIC FIELD WITH CONVECTION ON WALL |
5 |
| OPTIMIZING THE RHEOLOGICAL PROPERTIES OF WATER-BASED DRILLING FLUID USING CLAYS AND NANOPARTICLES FOR DRILLING HORIZONTAL AND MULTI-LATERAL WELLS |
3 |
| RHEOLOGICAL PROPERTIES COMPARISON OF AQUEOUS DISPERSED NANOCELLULOSE DERIVED FROM A NOVEL PATHWAY-PRODUCED MICROCRYSTALLINE CELLULOSE OR BY CONVENTIONAL METHODS |
3 |
| Optimization of the model of Ogden energy by the genetic algorithm method |
3 |
| RHEOLOGICAL STUDY OF POLY(LACTIC) ACID NANOCOMPOSITES WITH CARBON NANOTUBES AND GRAPHENE ADDITIVES AS A TOOL FOR MATERIALS CHARACTERIZATION FOR 3D PRINTING APPLICATION |
3 |
| Concentric cylinder viscometer flows of Herschel-Bulkley fluids |
3 |
| Concentration, Brine Salinity and Temperature effects on Xanthan Gum Solutions Rheology |
3 |
| FACTORS AFFECT WALL SLIP: PARTICLE SIZE, CONCENTRATION, AND TEMPERATURE |
2 |
| Preparation, Characterization and Rheological Behavior of Glutathione-Chitosan Conjugates in Aqueous Media |
2 |
| Effect of temperature on the fatigue behavior of asphalt binder |
1 |
| PROPERTIES OF POLYMER SOLUTIONS INTENDED FOR FORMATION OF HOLLOW FIBERS MEMBRANES BY INVERSION PHASES PROCESS |
1 |
| A STUDY OF THE FLOW BEHAVIOR OF PREVULCANISED NATURAL RUBBER LATEX/SINGLEWALLED CARBON NANOTUBES (SWCNT) BLENDS USING ROTATIONAL VISCOMETRY AND POWER LAW MODEL |
1 |
| Mapping linear viscoelasticity for design and tactile intuition |
1 |
| A simulation-based approach to evaluate objective material parameters from concrete rheometer measurements |
1 |
| VISCOELASTIC PROPERTIES OF GALLIUM-INDIUM ALLOY |
1 |
| EXPERIMENTAL EVALUATION OF THE PRESSURE SENSITIVITY OF MOLTEN POLYMER VISCOSITY WITH A TRIPLE-STAGE CAPILLARY RHEOMETER |
1 |
| QUANTIFICATION OF FLOW CURVE HYSTERESIS DATA - A NOVEL TOOL FOR CHARACTERISING MICROFIBRILLATED CELLULOSE (MFC) SUSPENSIONS |
1 |
| Rheological and Mechanical Gradient Properties of Polyurethane Elastomers for 3D-Printing with Reactive Additives |
1 |
| The Impact of Pulsatile Spiral Flow on the Wall Deformation Characteristics and Low-density Lipoproteins Accumulation in the Aorta |
1 |
| Rheological Properties of KCL/Polymer Type Drilling Fluids Containing Particulate Loss Prevention Material |
1 |
| Shear thinning and thickening of cemented paste backfill |
1 |
| THE INFLUENCES ON FIELD-INDUCED CHAINS BY NON-MAGNETIC MICROSTRUCTURES INSIDE THE MAGNETORHEOLOGICAL FLUIDS BASED ON PTFE-OIL ORGANOGEL |
0 |
| Review: Rheology concepts applied to geotechnical engineering |
0 |
| Wall Slip of Polyolefin Plastomers under Oscillatory Shear |
0 |
| Numerical Simulations of the Transport of Newtonian and Non-newtonian Fluids via Peristaltic Motion |
0 |
| Experimental diflculties often encountered with sludge rheological properties determination and advices to perform reliable measurements |
0 |
| Towards an optimization of the formulation of geopolymers in the fresh state: Rheological approach |
0 |
| RHEOKINETICS OF CEMENT PASTE HYDRATION DURING THE DORMANT PHASE |
0 |
| HARDENING STAGE EVALUATION OF WHITE PORTLAND CEMENTS USING OSCILLATORY AND COMPRESSIVE RHEOMETRY, ISOTHERMAL CALORIMETRY AND THE VICAT TEST |
0 |
| THE EFFECT OF SUSPENSION PROPERTIES ON SHEAR YIELD STRESS AND COMPRESSIBILITY OF THE SUSPENSION OF COPPER FLOTATION TAILINGS |
0 |
| Predictions of the shear modulus of cheese, a soft matter approach |
0 |
| Stochastic transient Liquid-Solid Phase Separation reveals multi-level Dispersion States of Particles in Suspension |
0 |
| Biopolymer-Surfactant Complexes as Flow Enhancers: Characterization and Performance Evaluation |
0 |
| LONG TERM CREEP ASSESSMENT OF ROOM-TEMPERATURE CURED EPOXY ADHESIVE BY TIME-STRESS SUPERPOSITION AND FRACTIONAL RHEOLOGICAL MODEL |
0 |
| EFFECT OF DIETHYLAMINOETHYL-DEXTRAN COATED LIPOSOMES ON THE RHEOLOGICAL PROPERTIES OF CARBOPOL GEL |
0 |
| Rheological properties and small-angle X-ray scattering studies of phosphate dust obtained from baghouse collectors |
0 |
| MEASUREMENT OF DRAG REDUCTION IN DILUTE POLYMER SOLUTION USING TRIBOELECTRIC EFFECT |
0 |
| TEMPERATURE DEPENDENT RHEOLOGY OF PLASTICIZED POLYMER SUSPENSIONS FILLED WITH CERAMIC NANOPARTICLES |
0 |
| SCALING LAW ACCOMPLISHED THROUGH CORRELATION OF LARGE AMPLITUDE OSCILLATORY SHEAR OF IMMISCIBLE POLYMER BLENDS WITH JACKSON AND TUCKER MODEL |
0 |
| Prediction of pipeline restart using different rheological models of gelled crude oil |
0 |
