| Fabrication and characterisation of ceramics via low-cost DLP 3D printing |
18 |
| Development and characterization of multi-element doped hydroxyapatite bioceramic coatings on metallic implants for orthopedic applications |
9 |
| The role anions on the synthesis of AlOOH nanoparticles using simple solvothermal method |
6 |
| Characterization of beta-tricalcium phosphate powders synthesized by sol-gel and mechanosynthesis |
5 |
| Artificial neural network and regression modelling to study the effect of reinforcement and deformation on volumetric wear of red mud nano particle reinforced aluminium matrix composites synthesized by stir casting |
5 |
| Performance of graphene oxide-modified electrodeposited ZnO/Cu2O heterojunction solar cells |
5 |
| FT-IR study of the hydrolysis and condensation of 3-(2-amino-ethylamino)propyl-trimethoxy silane |
5 |
| Mullite fabrication from natural kaolin and aluminium slag |
5 |
| The influence of the incorporation of crushed glass on the properties and high temperature behaviour of cement mortars |
5 |
| Microwave versus conventional sintering: Microstructure and mechanical properties of Al2O3-SiC ceramic composites |
5 |
| Crystallization characteristics and properties of lithium germanosilicate glass-ceramics doped with some rare earth oxides |
5 |
| Influence of waste glasses on the physico-mechanical behavior of porcelain ceramics |
4 |
| Calcium sulfate whisker reinforced non-fired ceramic tiles prepared from phosphogypsum |
4 |
| Microwave assisted solution combustion synthesis of beta-tricalcium phosphate nano-powders |
4 |
| Synthesis of nano-crystalline forsterite (Mg2SiO4) powder from biomass rice husk silica by solid-state route |
4 |
| Chemical composition and alteration processes of glasses from the Cathedral of Leon (Spain) |
4 |
| Effect of Cr2O3 and Fe2O3 doping on the thermal activation of un-polarized PZT charge carriers |
4 |
| Microwave assisted sol-gel synthesis of titanium dioxide using hydrochloric and acetic acid as catalysts |
3 |
| Fabrication of sustainable insulation refractory: Utilization of different wastes |
3 |
| Valorization of coffee waste with Moroccan clay to produce a porous red ceramics (class BIII) |
2 |
| Recycling of of residual boron muds into ceramic tiles |
2 |
| Influence of temperature on hydrothermal hot-pressing of magnesium hydroxyapatite powder |
2 |
| Influence of alumina and silica addition on the physico-mechanical and dielectric behavior of ceramic porcelain insulator at high sintering temperature |
2 |
| Further characterization of the surface properties of the SiC particles through complementarity of updates XPS and IGC-ID techniques |
2 |
| Improvement of mechanical and dielectric properties of porcelain insulators using economic raw materials |
2 |
| Ceramic foam decorated with ZnO for photodegradation of Rhodamine B dye |
2 |
| Thin film composites in the BiFeO3-Bi4Ti3O12 system obtained by an aqueous solution-gel deposition methodology |
2 |
| Post-mortem study of magnesia-chromite refractory used in the gas area of a Submerged Arc Furnace for the copper-making process |
1 |
| Enhancement and recovery of the tiles affected by atmospheric pollutants in the Galleries of Punta Begona, Getxo (Bizkaia) |
1 |
| Comparative study of the phase stability in SrTaO2N |
1 |
| High thermoelectric performances of Bi-AE-Co-O compounds directionally growth from the melt |
1 |
| After-glow luminescence of SrZrO3 prepared by plasma spraying |
1 |
| Improvement of mechanical and optical properties of Na2O-CaO-SiO2 glasses based on dune sand |
1 |
| Adsorption of copper (II) and cadmium (II) in aqueous suspensions of biogenic nanostructured CaCO3 |
1 |
| Structural, morphological and electrical characterization of ceria-based nanostructured thin films obtained by ultrasonic spray pyrolysis |
1 |
| Sulfate resistance of RFCC spent catalyst-blended Portland cement |
1 |
| 19th century stained-glass windows from Belem do Para (Brazil): Analytical characterisation and pathology |
1 |
| Influence of wet milling on the structural and mechanical behavior of ceramic products formed by extruding clay at Zulia (North de Santander, Colombia) |
0 |
| Simplified calculation of laminated glass: Displacements determination in beams and plates under static loadings by using monolithic models |
0 |
| Archaeometric analysis of Asturian pottery in XVI-XVII centuries |
0 |
| The role of the attrition milling on the grain size and distribution of the carbon nanotubes in YSZ powders |
0 |
| Experimental investigation on microstructure characteristics and mechanical behavior of a developed bi-treated soda-lime glass |
0 |
| Characteristics of the raw materials used by the companies of the ceramic sector of the metropolitan area of Cucuta (Colombia) |
0 |
| Production of vitreous materials from mineral coal bottom ash to minimize the pollution resulting from the waste generated by the thermoelectrical industry |
0 |
| Development of silica investments for the jewelry micro-casting process with pre-set emeralds |
0 |
| Archaeometric study of a set of ceramic materials from the old earthenware factory of Sargadelos (Lugo) |
0 |
| Use of iterative algorithms to calculate the softening curve in concrete |
0 |
| Anticipated Overfiring in Porcelain Tiles: Effects of the firing cycle and green bulk density |
0 |
| Characterization and bioactivity behavior of sol-gel derived bioactive vitroceramic from non-conventional precursors |
0 |
| Development of sustainable calcium silicate board: Utilization of different solid wastes |
0 |
