| Efficient CFD Simulation Model for a Planetary Gearbox |
6 |
| Effect of Preheating Inlet Air and Acid Gas on the Performance of Sulfur Recovery UnitCFD Simulation and Validation |
5 |
| Crack detection of plastic gears using a convolutional neural network pre-learned from images of meshing vibration data with transfer learning |
4 |
| Minimizing gear friction with water-containing gear fluids |
4 |
| Multi-objective gearbox design optimization for xEV-axle drives under consideration of package restrictions |
3 |
| Determination of the loss behavior and thermal balance of rolling bearings |
2 |
| The influence of variating passive user interactions on power tools in the context of product development |
2 |
| An adaptive geometric meshing theory for the face-milled generated spiral bevel gears |
2 |
| Grinding burn inspection Tools for supervising and objectifying of the testing process |
2 |
| Acoustic Emission Source Localization in Ring Gears from Wind Turbine Planetary Gearboxes |
2 |
| Spontaneous damage to wet-running multi-plate clutches with organic and metallic friction linings |
2 |
| Windage power loss reductions in high-speed gear pairs |
2 |
| Flank load carrying capacity of oil-lubricated high performance plastic gears Analysis of the pitting development in back-to-back tests |
2 |
| Analytical design method for beveloid gears with a small shaft angle and offset |
1 |
| Comparing Data Sources for Condition Monitoring Suitability |
1 |
| Co-simulation of the tooth contact of bevel gears within a multibody simulation |
1 |
| A study on tooth profile modification of cycloid planetary gear drives with tooth number difference of two |
1 |
| Tribological research on the development of White Etching Cracks (WECs) |
1 |
| Load sharing model for high contact ratio spur gears with long profile modifications |
1 |
| Tribo-dynamics model of a spur gear pair with gyroscopic effect and flexible shaft |
1 |
| The Analysis on Grease Lubrication at Two Tapered Bodies Contact Considering Surface Roughness |
1 |
| Study of flexible couplings non-linear dynamics using bond graphs |
1 |
| Investigation of tribological layers with time-of-flight secondary ion mass spectrometry (ToF-SIMS)-Additive's influence on friction behavior of wet multi-plate clutches |
1 |
| Comparison coefficient of friction curves of wet friction contacts in controlled slip mode under dynamic excitation |
1 |
| Influences of the steel plate on the running-in behavior of wet multi-plate clutches |
1 |
| Prediction of highway lane changes based on prototype trajectories |
1 |
| Development approaches for innovative highspeed clutches in BEV |
1 |
| Determining the load distribution by measuring the tooth root stresses |
1 |
| Optimized stator design method using machine parameter permutation |
1 |
| A new worm grinding method of face gears based on the optimization of dressing wheel profile |
1 |
| Analysis of blockchain technology in the mobility sector |
1 |
| Active Pneumatic Suspension - Modeling, Control and Hardware-in-the-Loop Simulations |
1 |
| A systematic method for accelerated aging characterization of lithium-Ion cells in automotive applications |
1 |
| Objectification methods for ride comfort Comparison of conventional methods and proposal of a new method for automated driving conditions |
1 |
| Efficient frequency-domain based fatigue life estimation of spot welds in vehicle components |
1 |
| The working space model-a tool for designing cleanliness relevant products |
1 |
| Ageneric transmission model for hybrid electric drives: Integration of the dynamic behavior of all conventional electric and hybrid-transmission mode types in asingle model |
1 |
| Modelling of Tool Workpiece InteractionsCoefficient of Restitution for Hammer Drilling of Concrete |
1 |
| Efficient Friction Screening Method for Wet Multiple Disk Clutches with Carbon Friction Material |
1 |
| Influence of O-2 enrichment in dry air on combustion temperature, contaminant production and sulfur recovery, in SRU reaction furnace |
1 |
| Hand-arm models for supporting the early validation process within the product development of single impulse operating power tools |
1 |
| Steel Reinforced Aluminium Casting |
0 |
| SimHydraulics approach to water hammer problems with the development of new formulas for static pressure diameter coefficient |
0 |
| Hydrodynamic processes in a simple stratification device for thermal energy storage Part 1-Fundamentals and investigation methodology |
0 |
| Time-optimal unfolding of a mobile truck-mounted concrete pump under constraints |
0 |
| Energy optimized driving strategy in consideration of traffic participants at intersections without traffic lights |
0 |
| Extension of Hill's Equations on Elliptical Orbits |
0 |
| Study on identifying opportunities to improve the performance of dry-running clutch systems using fiber optic sensing technology with high spatial measurement density |
0 |
| Friction and wear investigations on single chain joints |
0 |
| Hydrodynamic processes in a simple stratification device for thermal energy storages: Part 2-Influence on the outflow and thermal stratification in the storage tank and variation of the stratification device |
0 |
