| Emissions of fine and ultrafine particles and volatile organic compounds from different filament materials operated on a low-cost 3D printer |
3 |
| Concept of high quality simultaneous measurements of the indoor and outdoor aerosol to determine the exposure to fine and ultrafine particles in private homes |
3 |
| Hazardous substances on the airport apron - Part 2: hazardous substance exposure levels |
3 |
| Low-cost sensors and indoor air quality: A test study in three residential homes in Berlin, Germany |
2 |
| The measurement of nano- and microscale fibrous materials at workplaces - part 2 |
2 |
| Moulds in sedimentation dust in classrooms |
2 |
| Hazardous substance exposure on the airport apron - Part 1: Basics |
1 |
| Measurement of nanoscale and microscale fibrous materials at workplaces (part 1) |
1 |
| Application possibilities and limitations of low-cost dust sensors |
1 |
| Conclusions from the 11th proficiency test of VDB for total spore analysis |
1 |
| Ornithogenic effects on the lichen biota of the Black Alder forest generated by the Great Cormorant nesting colony |
1 |
| VOC evaluation of kitchen furniture respecting a model room test approach and calculation of predicted indoor air concentrations applying the power-law-model |
1 |
| Characterization of the emission behavior of pulse-jet cleaned filters using a low-cost particulate matter sensor |
1 |
| Experience with aerosol sampling from evaporative cooling systems with regard to the sampling procedure and Legionella analysis |
1 |
| Evaluation of the prognostic mesoscale model ProWiMo on the basis of the Guideline VDI 3783 Part 7-Part 2 |
1 |
| Means of converting the concentration of inhalable to respirable dust |
1 |
| Quantification of endotoxin with recombinant Factor C (rFC)-assay - comparison with LAL-Test |
1 |
| The new TRGS 554 Exhausts of diesel engines - Advice for its application |
1 |
| Development of forecast formulas for the assessment of the dust formation tendency of dry bulk materials |
1 |
| Risk grouping for nanomaterials at the workplace |
0 |
| Project study: Comparison of digestion methods for determination of the total metal content in dust samples - Part 3: Statistical evaluation of the proficiency tests |
0 |
| 5th Symposium Hazardous Substances at the Workplace: Sampling - Analysis - Assessment, from 18th to 19th September 2018 at Dortmund |
0 |
| Possibilities to optimize the design of cyclone separators for gas-solid separation |
0 |
| Adsorption filter tests carried out in accordance with DIN EN ISO 10121-Part 1: Adsorption tests on filter media |
0 |
| Metal analytics: changing requirements Developments and means for monitoring dusts containing metals in workplace air |
0 |
| Modelling of local dispersion processes in the near-ground atmospheric boundary layer |
0 |
| Hazardous substances at workplace - Occupational exposure limit, immission limit value or indoor air guide value? |
0 |
| Quartz dust exposure and silicoses in Switzerland |
0 |
| The bioclimate map of Germany: Period 1981 to 2010 |
0 |
| Exposure to allergens, endotoxin and (1-3)-beta-glucan in various areas of a veterinary faculty |
0 |
| Carbon fibres and carbon-fibre reinforced plastics (CFRPs) Part 1: Characterization, exposure, evaluation and protective measures |
0 |
| Inhalation exposure in laboratories at a production site of the chemical industry |
0 |
| Influence of discharging method and aerosol material on the filtration efficiency of electret filters |
0 |
| Measurement of nanoparticle exposure at workplaces in the food and feed industries |
0 |
| Test chamber based odour emission assessment of products - Statistical comparison of empiric odour data due to a collective of olfactory untrained potential market consumers and odour evaluation experienced panelists, and relation of odour intensity and acceptance impression values |
0 |
| Heavy metal and nitrogen concentration in mosses of German forests between 1990 and 2015-Comparing the national and federal states level |
0 |
| Two decades of soot measurements in the Berlin Air Monitoring Network |
0 |
| Dilution systems for test aerosols: fundamentals and applications |
0 |
| Derivation of up-to-date reference values for indoor workplaces |
0 |
| Safe reliable desulfurization of high and very high H2S loads by combination of physical, chemical and partly biological processes |
0 |
| Application of biocides for mold damages |
0 |
| Adjustment of the occupational exposure limit values for hydrocarbon mixtures (hydrocarbon solvents) - Part 2: Implementation of the new limit values |
0 |
| Pollution of indoor air by third-hand smoke |
0 |
| Project study: Comparison of digestion methods to determine the total metal content in dust samples - Part 1: Feasibility study at IFA |
0 |
| Evaluation of sensor-based low-cost devices for Indoor Air Quality (IAQ) measurement |
0 |
| Procedure for the selection of the representative year for calculated immission forecasts according to TA Luft |
0 |
| Bioaerosol measurements at a green waste composting plant and derivation of emission factors for individual key parameters |
0 |
| Source analysis by reverse dispersion modelling using Lagrangian trajectories |
0 |
| On the exposure of claw trimmers during the application of antibiotic sprays |
0 |
| Ethanol fireplaces - Effects on indoor air quality |
0 |
