| Cross-laminated timber (CLT) - a state of the art report |
8 |
| Seismic risk for Croatia: overview of research activities and present assessments with guidelines for the future |
8 |
| Possibilities of bioash application in road building |
5 |
| Assessment of reinforcement corrosion and concrete damage on bridges using non-destructive testing |
5 |
| Ranking conceptual locations for a park-and-ride parking lot using EDAS method |
5 |
| Application of nanotechnology in wastewater treatment |
5 |
| Construction process optimisation - review of methods, tools and applications |
4 |
| Comparison of methodologies for design peak discharge estimation in selected catchments of Bosnia and Herzegovina |
3 |
| Use of chloride ingress model for condition assessment in bridge management |
3 |
| Effect of curing methods and silica aerogel addition on properties of mortars |
3 |
| Application of industrial by-products as mineral admixtures for self-compacting concrete |
2 |
| Application of artificial neural networks for hydrological modelling in karst |
2 |
| Buckling resistance of stainless steel angle column |
2 |
| Introduction of recycled polyurethane foam in mastic asphalt |
2 |
| Overview and analysis of methods for assessing ride comfort on tram tracks |
2 |
| Modelling of traffic load effects in the assessment of existing road bridges |
2 |
| Management of sewage sludge - new possibilities involving partial cement replacement |
2 |
| N2 building design method |
2 |
| Wood biomass ash as a raw material in concrete industry |
2 |
| Effects of point loads on membrane structures |
2 |
| Application of iOS/Android based assessment and monitoring system for building inventory under seismic impact |
2 |
| Application of geological strength index for characterization of weathering-induced failures |
2 |
| Combined acoustical and economical noise barrier optimization using genetic algorithms |
2 |
| Optimisation of energy performance and thermal comfort of an office building |
2 |
| Use of e-plastic waste in bituminous pavements |
2 |
| Use of culverts for improving exchange of seawater in ports |
1 |
| Experience in the use of FIDIC contracts on rail infrastructure projects |
1 |
| Pavement performance levels causing human health risks |
1 |
| Engineering soil classification according to EN ISO 14688-2:2018 |
1 |
| Preventing aquaplaning phenomenon through technical solutions |
1 |
| Application of 2D digital image correlation for displacement and crack width measurement on RC elements |
1 |
| Bending moment curvature relationship as an indicator of seismic resistance of older bridge piers |
1 |
| MVP interaction based seismic vulnerability assessment of RC buildings |
1 |
| A signal timing assignment proposal for urban multi lane staged controlled signalised roundabouts |
1 |
| Excess pore pressure generation and post-cyclic loading settlement of geofiber-reinforced sand |
1 |
| Methodology for defining the design storm for sizing the infiltration system |
1 |
| Evaluation of methods for predicting axial capacity of jacked-in and driven piles in cohesive soils |
1 |
| Seismic assessment of existing RC buildings before and after shear-wall retrofitting |
1 |
| Behaviour of 3D RC frames placed at different angles on shaking table |
1 |
| Development of method for assessing efficiency of organic corrosion inhibitors in concrete reinforcement |
1 |
| Possibility of using bottom ash in precast concrete products |
1 |
| Trends in non-destructive testing of rock bolts |
1 |
| Smart cities and buildings |
1 |
| BIM implementation in building maintenance management |
1 |
| Research challenges for broader application of alternative binders in concrete |
1 |
| Pile groups subjected to abrupt collapse of retaining structure |
1 |
| Joint probability analysis of flood hazard at river confluences using bivariate copulas |
1 |
| Integrated computational model for Sea Organ simulation |
1 |
| Evaluation of groundwater contamination in former military airport area |
1 |
| Parametric study of geocell reinforced pavement |
1 |
