| Experiment Research on Pulverized Coal Combustion in the Tuyere of Oxygen Blast Furnace |
5 |
| Effect of the Tundish Gunning Materials on the Steel Cleanliness |
4 |
| Electrochemical and Phase Analysis of Si(IV) on Fe Electrode in Molten NaCl-NaF-KCl-SiO2 System |
4 |
| Deposition Characteristics of Multitrack Overlay by Plasma Transferred Arc Welding on SS316L with Co-Cr Based Alloy - Influence of Process Parameters |
4 |
| Characterization of Mn-Doped Co3O4 Thin Films Prepared by Sot Gel-Based Dip-Coating Process |
3 |
| Effect of Current on Segregation and Inclusions Characteristics of Dual Alloy Ingot Processed by Electroslag Remelting |
3 |
| Microstructure and Mechanical Properties of 14Cr-ODS Steels with Zr Addition |
3 |
| A Strain-Compensated Constitutive Model for Describing the Hot Compressive Deformation Behaviors of an Aged Inconel 718 Superalloy |
3 |
| Production of Iron Based Alloys from Mill Scale through Metallothermic Reduction |
3 |
| Crater Formation on the Surface of Pure Metal and Alloy Irradiated by High Current Pulsed Electron Beam |
3 |
| Effect of Sulfur and Chlorine on Fireside Corrosion Behavior of Inconel 740 H Superalloy |
3 |
| Effect of CeO2 on TiC Morphology in Ni-Based Composite Coating |
3 |
| Effect of the Basicity on the Crystallization Behavior of Titanium Bearing Blast Furnace Slag |
2 |
| The effect of Nb content on precipitates, microstructure and texture of grain oriented silicon steel |
2 |
| Effect of Reductant Type on the Metallothermic Magnesium Production Process |
2 |
| Simulation of Dynamic Recrystallization Behavior under Hot Isothermal Compressions for as-extruded 3Cr20Ni10W2 Heat-Resistant Alloy by Cellular Automaton Model |
2 |
| Distribution of P2O5 between P-rich Phase and Matrix Phase in P-bearing Steelmaking Slag |
2 |
| Melting Features and Viscosity of TiO2-Containing Primary Slag in a Blast Furnace |
2 |
| Cutting performance of a functionally graded cemented carbide tool prepared by microwave heating and nitriding sintering |
2 |
| Effect of Trailing Intensive Cooling on Residual Stress and Welding Distortion of Friction Stir Welded 2060 Al-Li Alloy |
2 |
| Study on Dynamic Development of Three-dimensional Weld Pool Surface in Stationary GTAW |
2 |
| Effect of Prestrain on Precipitation Behaviors of Ti-2.5Cu Alloy |
2 |
| Effects of Cerium on the Inclusions and Pitting Corrosion Behavior of 434 Ferritic Stainless Steel |
2 |
| Experimental and Numerical Investigations on Hot Deformation Behavior and Processing Maps for ASS 304 and ASS 316 |
2 |
| Equiaxed Solidification of 430 Ferritic Stainless Steel Nucleating on Core-Containing Ti |
2 |
| Effect of B2O3 on Slag-Metal Reaction between CaO-Al2O3-Based Mold Flux and High Aluminum Steel |
2 |
| Failure Analysis of the Corroded Water Wall Tube in a 50MW Thermal Power Plant |
2 |
| Catalytic Synthesis of n-Butyl Oleate by Cerium Complex Doped Y/SBA-15 Composite Molecular Sieve |
2 |
| Correlation between Travel Speed, Microstructure, Mechanical Properties and Wear Characteristics of Ni-Based Hardfaced Deposits over 316LN Austenitic Stainless Steel |
2 |
| Microstructure and Interface Bonding Strength of WC-10Ni/NiCrBSi Composite Coating by Vacuum Brazing |
2 |
| Refill Friction Stir Spot Welding of Dissimilar 6061/7075 Aluminum Alloy |
2 |
| Investigation of Growth Kinetics of Fe2B Layers on AISI 1518 Steel by the Integral Method |
2 |
| Investigation on Double Wire Metal Inert Gas Welding of A7N01-T4 Aluminum Alloy in High-Speed Welding |
2 |
| Oxidation Behaviour of Welded ASTM-SA210 GrA1 Boiler Tube Steels under Cyclic Conditions at 900 degrees C in Air |
2 |
| Effect of MgO/Al2O3 Ratio on Viscosity of Blast Furnace Primary Slag |
2 |
| A Review of Boron-Rich Silicon Borides Based on Thermodynamic Stability and Transport Properties of High-Temperature Thermoelectric Materials |
2 |
| A Constitutive Equation for Predicting Elevated Temperature Flow Behavior of BFe10-1-2 Cupronickel Alloy through Double Multiple Nonlinear Regression |
2 |
| Oxidation Behavior of Ferritic Steel T22 Exposed to Supercritical Water |
2 |
| A Multi Scale Strategy for Simulation of Microstructural Evolutions in Friction Stir Welding of Duplex Titanium Alloy |
2 |
| Modeling of the Hot Flow Behaviors for Ti-6Al-4V-0.1Ru Alloy by GA-BPNN Model and Its Application |
2 |
| Partition Behavior of Alloying Elements in Nickel-Based Alloys and Their Activity Interaction Parameters and Infinite Dilution Activity Coefficients |
2 |
| Microstructure and Mechanical Properties of Thick Plate Friction Stir Welds for 6082-T6 Aluminum Alloy |
2 |
| Microstructure and Properties of Si3N4 Ceramics and 304 Stainless Steel Brazed Joint with Cu/Ag-Cu/Ti Laminated Filler Metal |
1 |
| Study of the High-temperature Synthesis of MgAl2O4 Spinel Refractory Raw Materials from Chromium Slag |
1 |
| Influence of Heating on Tensile Physical-Mechanica Properties of Granite |
1 |
| Effect of Basicity on Precipitation of Spinel Crystals in a CaO-SiO2-MgO-Cr2O3-FeO System |
1 |
| Surface Alloys of 0.45 C Carbon Steel Produced by High Current Pulsed Electron Beam |
1 |
| Siliceous Manganese Ore from Eastern India: A Potential Resource for Ferrosilicon-Manganese Production |
1 |
| Effects of B on the Hot Ductility of Fe-36Ni Invar Alloy |
1 |
| Microwave-Assisted Molten-Salt Facile Synthesis of Chromium Carbide (Cr3C2) Coatings on the Diamond Particles |
1 |
