| SiCp/glass fibers reinforced epoxy composites: Wear and erosion behavior |
9 |
| Microstructural and mechanical properties of friction stir welded pure lead |
7 |
| Performance assessment of air-water and TiO2 nanofluid mist spray cooling during turning hardened AISI D2 steel |
5 |
| Turning processes investigation of materials austenitic, martensitic and duplex stainless steels and prediction of cutting forces using artificial neural network (ANN) techniques |
4 |
| Effect of cryogenic treatment on the wear resistance and microstructure of Ti-6Al-4V |
3 |
| Free vibration and dynamic mechanical properties of basalt fiber reinforced polymer composites |
3 |
| Tribological behaviour of aluminium alloy 8011 |
3 |
| Evaluation of mechanical properties of aluminium alloy (LM25) reinforced with fused silica metal matrix composite |
3 |
| Investigations on dry sliding wear behaviour of nylon-6 and GFR nylon-6 composites using Taguchi technique |
3 |
| Development and characterization of glass/polyester composites filled with industrial wastes using statistical techniques |
3 |
| Effect of built orientation on direct metal laser sintering of Ti-6Al-4V |
2 |
| Optimization of process parameters for improving drilling quality and machining performance of abrasive assisted drilling on AISI D2 steel |
2 |
| Impeller design for an axial-flow pump based on multi-objective optimization |
2 |
| Compressive strength of lightweight foamed concrete with charcoal as a sand replacement |
2 |
| Study on the effect of process parameters with the use of minimum quantity lubrication and solid lubricants in turning |
2 |
| MQL assisted cleaner machining using PVD TiAlN coated carbide insert: Comparative assessment |
2 |
| Optimization of material removal rate in wire electric discharge grinding for micro machining of tungsten electrodes |
2 |
| Friction-wear behavior of shot peened aluminium 7075-T651 alloy |
2 |
| Wear properties of SiCp and TiO2p reinforced aluminium metal matrix composites |
2 |
| Magnetic and dielectric properties of Ca2+ doped Bi0.9La0.1FeO3 nanoparticles prepared by the sol-gel method |
1 |
| Influence of isolation system characteristic strength on the earthquake behavior of base-isolated liquid storage tanks |
1 |
| Study of hardness and wear behavior of surface modified AA 7075 with tungsten carbide using GTA as a heat source |
1 |
| Experimental investigations on wire electrical discharge machining characteristics of aluminum hybrid composites |
1 |
| Analysis and characterization of weld quality during butt welding through friction stir welding |
1 |
| Effect of ball-to-powder weight ratio on microstructure evolution of nanocrystalline Mg-Zn powders prepared by mechanical milling |
1 |
| Wear resistance evaluation of cryogenically treated AISI-H11 steel: An optimization approach |
1 |
| Experimental and numerical evaluation of geometric variation of critical SZW in 20MnMoNi55 steel |
1 |
| Multi-performance optimization of abrasive water jet machining of carbon epoxy composite material |
1 |
| Evaluation of tensile, flexural and impact properties on sisal/glass fiber reinforced polymer hybrid composites |
1 |
| Laboratory evaluation of PE modified asphalt mixture containing reclaimed asphalt pavement |
1 |
| Structural study and phase transformation of Cu-Al-Ni shape memory alloy produced by severe plastic deformation |
1 |
| Mechanical properties and microstructural characterization of automated pulse TIG welding of dissimilar aluminum alloy |
1 |
| Thermal and mechanical properties of lightweight concretes based on waste aggregates |
1 |
| Multi-objective optimization of quality characteristics in single point incremental forming process by response surface methodology |
1 |
| Abrasive water jet machining of carbon epoxy composite: Cutting performance, predictive models and optimization |
1 |
| Effect of electrode material in micro-electrical discharge machining of micro-holes drilled in shape memory alloys |
1 |
| Simulation of surface patterns imprinted by wheel grinding which dressed by rounded tools |
0 |
| Impact of post processing parameter on mechanical properties and surface roughness of selective laser sintered sand mold casting part |
0 |
| Effect of production process parameters on high temperature stability of rubber asphalt mixture |
0 |
| Digital signal processing-based volumetric error improvement of a CNC machine tool using Kriging interpolation |
0 |
| Effect of alkali treatment and nano filler addition on properties of palm/glass fiber reinforced polymer composite |
0 |
| Flexural analysis of posttensioned reinforced concrete beams using external steel bars |
0 |
| Development and comparison of cotton dust waste - jute and cotton dust waste - glass fiber reinforced epoxy based hybrid composites |
0 |
| Twinning and dynamic recrystallization in AZ31 magnesium alloy under medium-high strain rate |
0 |
| Impact response and damage resistance behavior of GFRP/aluminium fiber metal laminates during low velocity impact test |
0 |
| Influence of LBW parameters on properties of Ti6Al4V/AA2024 dissimilar alloy joint |
0 |
| Performance evaluation of mechanical micro-drilling, electrical discharge machining and laser beam machining on Nimonic 80A alloy |
0 |
| Experimental investigations of Nylon 6 polymer matrix composites material (70:30) for wear reduction in gears |
0 |
| Taguchi and multi-objective genetic algorithm-based optimization during ECDM of SiCp/glass fibers reinforced PMCs |
0 |
| Study on surface characteristics of friction stir processed AZ91 with titanium carbide micro particles |
0 |
