| Enhancement of wear resistance and impact toughness of as cast hypoeutectic high chromium cast iron using niobium |
6 |
| Effects of Mo and Ni on the thermal conductivity of compacted graphite iron at elevated temperature |
4 |
| Liquid phase separation in immiscible Cu-Fe alloys |
3 |
| The effect of Sr modification on thermal diffusivity of Al-8Si alloy |
3 |
| Comparative study on the microstructures and hardness of the AlSi10.6CuMg alloy produced by sand casting and high pressure die casting |
3 |
| Solubility of hydrogen in liquid aluminium: reanalysis of available data |
3 |
| Some aspects of grain refining of Al-Si cast alloys |
3 |
| Study of austempering kinetics of high silicon bainitic cast steels |
3 |
| A pseudo-transient heat transfer simulation of a continuous casting process, employing the element-free Galerkin method |
3 |
| Evolution of iron-rich intermetallics and elevated temperature mechanical properties in gravity die cast 2A16 Al alloy |
3 |
| Development of a numerical model for hydrogen bubble generation, dynamics and trapping during solidification of aluminium alloys through Eulerian-Lagrangian framework |
3 |
| Solidification behaviour of Al-Si based alloys with controlled additions of Eu and P |
2 |
| Applying Taguchi method to study the wear behaviour of ZA-27 alloy-based composites reinforced with SiC nanoparticles |
2 |
| Study of dimensional change of high-silicon ductile iron with ADI and Dual-Phase-ADI microstructures starting from different as-cast structures |
2 |
| On the thermal conductivity of CGI and SGI cast irons |
2 |
| Investigation of parameters and mechanism of ultrasound-assisted wet reclamation of waste sodium silicate sands |
2 |
| Effects of cooling rate and initial composition on the solidification path and microstructure of Al-Cu-Si alloys |
2 |
| Microstructures and mechanical properties of Er modified AA7075 alloy |
1 |
| Control of microstructure and macrosegregation of large-sized aluminium alloy billet by uniform direct chill casting |
1 |
| Effect of Heat Treatment on the Properties of AlCu26Si8 |
1 |
| Comparison of approaches to the numerical modelling of pure metals solidification using the control volume method |
1 |
| Comparative studies of grain refinement of commercial purity Mg by CaO and Ca addition |
1 |
| Intensive melt shearing and calcium concentration effects on grain refinement of commercial purity Mg |
1 |
| Microstructure development during directional solidification of Sn-Ag-Cu ternary alloys |
1 |
| Relationship between matrix-microstructure and mechanical properties of copper alloyed thin wall austempered gray cast iron (TWAGI) |
1 |
| The transition from stable to metastable system and its relation with the ferrite halo extension in SG cast irons |
1 |
| Transient thermal stress development in direct chill cast ingots with application of a wiper |
1 |
| The investigation of the floatation of double oxide film defect in liquid aluminium alloys by a four-point bend test |
1 |
| Assessment of the effect of cooling rate on dendrite coherency point and hot tearing susceptibility of AZ magnesium alloys using thermal analysis |
1 |
| Microstructure control in functionally graded Al-Si castings |
1 |
| Effect of (La plus Yb) addition on the fluidity of an A356.2 aluminum alloy |
1 |
| Effect of mold oscillation on the metallurgical characterization and mechanical properties of A319 aluminum alloy casting |
1 |
| The effect of various production parameters on the heat absorbing capacity of greensand |
1 |
| Applying ANOVA and DOE to study the effect of manganese on the hardness and wear rate of artificially aged Al-4.5wt%Cu alloys |
1 |
| Numerical simulation and experimental investigation of a thin-wall magnesium alloy casting based on a rapid prototyping core making method |
1 |
| Determination of pattern allowances for steel castings using the finite element inverse deformation analysis |
1 |
| As-casting performance of gold alloys and their de-bonding strengths in metal-ceramic systems |
1 |
| End product rejection rate and its correlation with melt treatment in direct-chill casted hot rolling slabs |
1 |
| The efficiency analysis of grain refinement in high-zinc aluminium alloys with Ti-containing master alloy |
1 |
| Properties of silica sand and GBF slag moulds practiced by Nishiyama process |
1 |
| Effect of inoculation and nodularisation treatment temperature on recalescence and eutectic undercooling temperature in Spheroidal graphite (SG) cast iron |
1 |
| Role of scandium additions in primary silicon refinement of hypereutectic Al-20Si alloys |
1 |
| Prediction of porosity characteristics of aluminium castings based on X-ray CT measurements |
1 |
| Method for reducing aluminum alloy heat loss in high pressure die casting shot sleeves |
0 |
| Microstructure and cavitation behaviour of alloyed austempered ductile irons |
0 |
| New numerical/experimental model for prediction of tensile properties in aluminum A357 castings: the effect of microstructure and microshrinkages |
0 |
| Microstructure evolution of semi-solid SiCp/AZ91D nanocomposite during isothermal heat treatment process |
0 |
| Microstructure, hardness, toughness and abrasive wear resistance of 16.0 wt. % chromium white iron after continuous and cyclic destabilisation treatment |
0 |
| Corrosion characteristics of a tungsten alloy die-casting mould material in molten aluminium alloy |
0 |
| A particle population analysis in Ti- and Al-deoxidized Hadfield steels |
0 |
