| Production and characterization of mechanical and microstructural behaviour of friction stir welded Al6063 composites reinforced with Gr/B4C/SiC particles |
5 |
| Sintering densification and properties of Al2O3/Al cermet materials via powder metallurgy method |
4 |
| Scintillation and photoluminescence properties of Pr-doped CaHfO3 crystals |
4 |
| The effect of the sintering temperature on the properties of porous YAG ceramics |
3 |
| Properties of cementless binders using desulfurization slag as an alkali activator |
3 |
| Dielectric and ferroelectric characteristics of doped BZT-BCT ceramics sintered at low temperature |
3 |
| Preparation and properties of Al-Al2O3 metal ceramics via powder metallurgy methods |
3 |
| Synthesis and analysis of the influence of Eu3+ on the structural, ferromagnetic, dielectric and conductive characteristics of Ni0.4Zn0.45Cu0.15Fe(2-x)EuxO4 composites using conventional double sintering ceramic method |
3 |
| Microstructure and mechanical properties of B4C-TiB2 ceramic composites hot pressed with in-situ reaction |
3 |
| Properties of wear rate and electrical conductivity of carbon ceramic composites |
3 |
| Effect of Ce0.9Gd0.1O1.95 as a promoter upon the oxygen transfer properties of MgMnO3-delta-Ce0.9Gd0.1O1.95 composite oxygen carrier materials for chemical looping combustion |
3 |
| Evaluation of scratch resistant properties of electroless Ni-P-Al2O3 composite coatings |
3 |
| Development of microwave-assisted sol-gel rapid synthesis of nano-crystalline perovskites oxygen carrier material in oxyfuel combustion |
3 |
| Effect of coating thickness on contact fatigue and wear behavior of thermal barrier coatings |
3 |
| Dielectric properties and microstructures of (CaxSr1-x)ZrO3 ceramics |
3 |
| Thermodynamic analysis on the chemical vapor deposition process of Ta-C-H-Cl system |
2 |
| Electrical properties and microstructure of zno varistor with high surge protective characteristics |
2 |
| Influence of nano silica on the fresh, hardened and durability properties of selfcleaning white Portland cement mortars |
2 |
| Development of sulfuric acid resistant concrete sewer pipes using waste glass powder and meta-kaolin |
2 |
| Effect of alkaline-earth oxides on firing behaviour of monoporosa wall tile bodies |
2 |
| Effect of w/b ratio and binder content on the properties of self-compacting high performance concrete (SCHPC) |
2 |
| Energy storage properties of dielectric Bi1.5Zn1.0Nb1.5O7 thick films on flexible metal foil substrates fabricated by aerosol deposition method |
2 |
| A comparative study on low-purity natural graphite with various metal oxide impurities as an anode active material for lithium ion batteries |
2 |
| Influences of superabsorbent polymers on the strength and shrinkage properties of low water-to-binder ratio expansive concrete |
2 |
| Thermal and mechanical properties of C/SiC composites fabricated by liquid silicon infiltration with nitric acid surface-treated carbon fibers |
2 |
| Effect of MgO addition on physico-chemical, mechanical and thermal behaviour of Al/Si3N4 composite material developed via hybrid casting technique |
2 |
| Roles of talc-illite on phase transformation, vitrification and physical properties of a triaxial porcelain body |
2 |
| Effects of micronization on optical property of ceramic pigments for digital ink-jet printing |
2 |
| Effect of pyrolysis temperature on heat-generating behavior and morphology of SiC fiber mats |
2 |
| Statistical analysis of Vickers hardness and fracture toughness of repeated crack-healing SiC composite ceramics considering economics |
2 |
| Synthesis and characterization of biphasic calcium phosphate ceramics using a sponge coating method |
2 |
| Mechanical Properties and Crystallization Behavior of Silica-Based Ceramic Cores with Different Particle Morphologies |
2 |
| Weibull statistical analysis for vickers hardness of Al2O3/SiC composite according to the SiC concentration |
2 |
| Enhanced thermoelectric properties of the SrTiO3 by Zr-doping with different doping level |
2 |
| Electrochemical performance of amorphous carbon coated alpha-Fe2O3/expanded natural graphite composites as anode active materials for lithium ion batteries |
1 |
| Electro-caloric properties of KTa0.60Nb0.40O3 thin films prepared by sol-gel method |
1 |
| Electrocaloric properties of K(Ta0.6Nb0.4)O3/SrTiO3 double layer thin films using metal alkoxides |
1 |
| Biomorphic carbon materials coated meso-porous crystals |
1 |
| Characterization of broadband dielectric properties of aerosol-deposited Al2O3 thick films |
1 |
| Effect of Cu doping on structural properties and photocatalytic activity of TiO2 nanoparticles synthesized by sol-gel method |
1 |
| Materials and process development for manufacturing porcelain figures using a binder jetting 3D printer |
1 |
| Effects of powder particle size on mechanostructure and cell viability of the synthesised bioceramic bone grafts |
1 |
| Sodium titanate as an infrared reflective material for cool roof application |
1 |
| Effects of Ifon clay and sintering temperature on the phase evolution and physico-mechanical properties of mullite-carbon ceramic composites |
1 |
| Effect of strontium on the structural and piezoelectric properties of the sol gel processed barium titanate |
1 |
| Study on the Phase and Bath Electrochemical Properties in Electrodeposition of ZnS Film |
1 |
| Effect of AlN content on the properties and microstructure of pressureless-sintered Al2O3-AlN composites |
1 |
| Review on the self-healing concrete-approach and evaluation techniques |
1 |
| Stress and strain behavior of cementitious composites with epoxy/urea-formaldehyde microcapsules under uniaxial tests |
1 |
| Investigation of wear properties of CaO, MgO added stabilized zirconia ceramics produced by different pressing methods |
1 |
