| Silica-Based Membranes with Molecular-Net-Sieving Properties: Development and Applications |
10 |
| Selective Recovery of Platinum Group Metals from Spent Automotive Catalysts by Leaching and Solvent Extraction |
8 |
| Measurements and Simulation of the Polyethylene glycol 1000-Water-KCl Ternary System at 288. 298. and 308.2 K |
6 |
| Solid-Liquid Equilibria in Ternary System SrBr2-MgBr2-H2O at (298 and 323) K |
5 |
| Hydrogen Production from Formic Acid Using Pd/C, Pt/C, and Ni/C Catalysts Prepared from Ion-Exchange Resins |
5 |
| Synthesis of Porous Silica Particles Using Sodium Silicate Precursor for Water-Repellent Surfaces |
4 |
| Catalytic Combustion of Toluene over Cu-Mn Mixed Oxide Catalyst |
4 |
| On the Importance of Modelling Bubble Dynamics for Point-mass Numerical Calculations of Bubble Columns |
4 |
| Influence of Structured Packings on Local Phase Distribution in a Semi-Batch Bubble Column Operated in the Homogeneous Regime |
4 |
| A Novel Binary-Extractant-Impregnated Resin for Selective Recovery of Scandium |
3 |
| Recovery of Gold and Silver from an Incinerated Spent Printed Circuit Board Using Chlorination |
3 |
| Thermodynamic Modeling of the Solubility of Acetylacetonate-Type Metal Precursors in Supercritical Carbon Dioxide Using the PC-SAFT Equation of State |
3 |
| Prediction of Aeration Performance for Inverted Umbrella Aerator Based on Dimensional Analysis |
3 |
| Numerical Investigation for the Movement of Cell Colonies in Bioreactors: Stirring and Orbital Shaking Tanks |
3 |
| Mathematical Modeling and Simulation of Carbon Monoxide Absorption Column for Blast Furnace Gas and Linz-Donawitz Gas Separation by COSORB Process |
2 |
| Process-Identification and Design of Robust PI Controller for a Self-Oscillating Integral Process with Dead Time |
2 |
| Database Management Method Based on Strength of Nonlinearity for Locally Weighted Linear Regression |
2 |
| Dimensions and Analysis of Uncertainty in Industrial Modeling Process |
2 |
| Co-processing of Saturated and Unsaturated Triglycerides in Catalytic Cracking Process for Hydrocarbon Fuel Production |
2 |
| Development of Ion-Exchange Membranes for the Membrane Bunsen Reaction in Thermochemical Hydrogen Production by Iodine-Sulfur Process |
2 |
| Relative Breakthrough Time (RBT) of Organic Vapor in Activated Carbon Small Beds in Low Relative Humidity Environment |
2 |
| Electrokinetic Remediation of Electrolytic Manganese Residue Using Solar-Cell and Leachate-Recirculation |
2 |
| Improved Relay Feedback Method Under Noisy and Disturbance Environments |
2 |
| Heavy Metal Distribution in Sediment and Water of a Lake and Its Input Rivers in an Abandoned Lead and Zinc Mine |
2 |
| Effect of Confinement and Fluid Yield Stress on Heat Transfer from an Isothermal Sphere |
2 |
| A Novel Solvent Extraction System for Lithium Recovery from Underground Brine |
2 |
| Li4Mn5O12 Desorption Process with Acetic Acid and Mn Dissolution Mechanism |
2 |
| Encapsulation of Isolated C60 Molecules in a Cyclodextrin-based Metal-Organic Framework |
2 |
| Multiphase Micro fluidic Processes to Produce Alginate-Based Microparticles and Fibers |
2 |
| Flow Regime Transitions in a Bubble Column with Internals Based on a Novel Approach |
2 |
| Preparation of Isoamyl Acetate by High Performance ZSM-5 Zeolite Membrane |
2 |
| Absorption of Carbon Dioxide at High Temperature with Molten Alkali Carbonate Using Bubble Column Reactor |
2 |
| Effect of LiOH Addition on Dehydration Reaction of Mg(OH)(2) |
2 |
| A Modified Boundary Condition of Velocity for Continuity Equation with Non-uniform Density Distribution at Outlet Boundary Plane |
2 |
| Recovery of Indium and Gallium from Spent IGZO Targets by Leaching and Solvent Extraction |
2 |
| The Multi-Objective Optimization Model of Flue Aimed Temperature of Coke Oven |
2 |
| Static Adsorption of Cesium Ions on Kaolin/Vermiculite and Dynamic Adsorption/Desorption Using the Electrokinetic Process |
2 |
| Induction of Colony Formation of Microcystis aeruginosa by Controlling Extracellular Polysaccharides and Metal Cation Concentrations |
1 |
| Effect of Surface Modifier of Nanoparticles on Dewetting Behaviors of Polymer Nanocomposite Thin Films |
1 |
| Application of Dividing Wall Column in Silane Off-Gas Recovery Process: Optimal Design and Control |
1 |
| Improvement in Hydrogen Permeability of Palladium Membrane by Alloying with Transition Metals |
1 |
| Dissolution of Illite in Supercritical CO2-Saturated Water: Implications for Clayey Caprock Stability in CO2 Geological Storage |
1 |
| Experimental Measurement of Cavitation-Induced Vibration Characteristics in a Multi-Stage Centrifugal Pump |
1 |
| Adsorptive Removal of Arsenic from Aqueous Environment |
1 |
| Mercury Forms in By-Products from Coal-Fired Power Plant |
1 |
| Separation and Extraction of Scandium and Titanium from a Refractory Anatase Lixivium by Solvent Extraction with D2EHPA and Primary Amine N1923 |
1 |
| Nonlinear Processes Fault Identification with Application to PCFBP |
1 |
| Chaotic Analysis Based on Velocity Measurement in Nozzle Opposed Impinging Stream Mixer |
1 |
| Study of Alternative Reactor-Separator Network in Bunsen Process of Sulfur-Iodine Cycle for Hydrogen Production |
1 |
| Techno-Economic Evaluation and Comparative Analysis of the CO2 Separation Processes Using Different Piperazine-Mixed Amine Absorbents |
1 |
